Re: [PATCH v1 1/2] PCI: dwc: Fix resume failure if no EP is connected on some platforms

[Manivannan Sadhasivam]

On Wed, Sep 25, 2024 at 01:48:36PM +0800, Richard Zhu wrote:
> The dw_pcie_suspend_noirq() function currently returns success directly
> if no endpoint (EP) device is connected. However, on some platforms, power
> loss occurs during suspend, causing dw_resume() to do nothing in this case.
> This results in a system halt because the DWC controller is not initialized
> after power-on during resume.
> 
> Change call to deinit() in suspend and init() at resume regardless of

s/Change call to/Call

> whether there are EP device connections or not. It is not harmful to
> perform deinit() and init() again for the no power-off case, and it keeps
> the code simple and consistent in logic.
> 
> Fixes: 4774faf854f5 ("PCI: dwc: Implement generic suspend/resume functionality")
> Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
> Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
> ---
>  .../pci/controller/dwc/pcie-designware-host.c | 30 +++++++++----------
>  1 file changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index a0822d5371bc..cb8c3c2bcc79 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -933,23 +933,23 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
>  	if (dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKCTL) & PCI_EXP_LNKCTL_ASPM_L1)
>  		return 0;
>  

There is one more condition above. It checks whether the link is in L1ss state
or not and if it is, the just returns 0. Going by your case, if the power goes
off during suspend, then it will be an issue, right?

> -	if (dw_pcie_get_ltssm(pci) <= DW_PCIE_LTSSM_DETECT_ACT)
> -		return 0;
> -
> -	if (pci->pp.ops->pme_turn_off)
> -		pci->pp.ops->pme_turn_off(&pci->pp);
> -	else
> -		ret = dw_pcie_pme_turn_off(pci);
> +	if (dw_pcie_get_ltssm(pci) > DW_PCIE_LTSSM_DETECT_ACT) {
> +		/* Only send out PME_TURN_OFF when PCIE link is up */

Move this comment above the 'if' condition.

- Mani

> +		if (pci->pp.ops->pme_turn_off)
> +			pci->pp.ops->pme_turn_off(&pci->pp);
> +		else
> +			ret = dw_pcie_pme_turn_off(pci);
>  
> -	if (ret)
> -		return ret;
> +		if (ret)
> +			return ret;
>  
> -	ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
> -				PCIE_PME_TO_L2_TIMEOUT_US/10,
> -				PCIE_PME_TO_L2_TIMEOUT_US, false, pci);
> -	if (ret) {
> -		dev_err(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val);
> -		return ret;
> +		ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
> +					PCIE_PME_TO_L2_TIMEOUT_US/10,
> +					PCIE_PME_TO_L2_TIMEOUT_US, false, pci);
> +		if (ret) {
> +			dev_err(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val);
> +			return ret;
> +		}
>  	}
>  
>  	if (pci->pp.ops->deinit)
> -- 
> 2.37.1
> 

-- 
மணிவண்ணன் சதாசிவம்