[PATCH v2 RESEND 13/14] soundwire: mipi-disco: add new properties from 2.0 spec

[Bard Liao]

From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>

The DisCo for SoundWire 2.0 spec adds support for new
'mipi-sdw-sdca-interrupt-register-list' and
'mipi-sdw-commit-register-supported'.

This patch only adds the definitions and property reads, but the use
of these properties will come at some point in the future when needed.

Note a slight conceptual disconnect between the MIPI DisCo definition
of a boolean property and the Linux implementation. The latter only
checks the presence of the property to set its value to 'true',
whereas the MIPI definitions allow for a property with a 'false'
value. This patch uses the new introduced mipi_device_property_read_bool()
to handle it.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
Signed-off-by: Bard Liao <yung-chuan.liao@xxxxxxxxxxxxxxx>
---
 drivers/soundwire/mipi_disco.c | 6 ++++++
 include/linux/soundwire/sdw.h  | 7 ++++++-
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/soundwire/mipi_disco.c b/drivers/soundwire/mipi_disco.c
index d6eb63bf1252..36e734751225 100644
--- a/drivers/soundwire/mipi_disco.c
+++ b/drivers/soundwire/mipi_disco.c
@@ -398,6 +398,12 @@ int sdw_slave_read_prop(struct sdw_slave *slave)
 	device_property_read_u32(dev, "mipi-sdw-sink-port-list",
 				 &prop->sink_ports);
 
+	device_property_read_u32(dev, "mipi-sdw-sdca-interrupt-register-list",
+				 &prop->sdca_interrupt_register_list);
+
+	prop->commit_register_supported = mipi_device_property_read_bool(dev,
+			"mipi-sdw-commit-register-supported");
+
 	/*
 	 * Read dp0 properties - we don't rely on the 'mipi-sdw-dp-0-supported'
 	 * property since the 'mipi-sdw-dp0-subproperties' property is logically
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 66feaa79ecfc..952514f044f0 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -335,8 +335,11 @@ struct sdw_dpn_prop {
  * @master_count: Number of Masters present on this Slave
  * @source_ports: Bitmap identifying source ports
  * @sink_ports: Bitmap identifying sink ports
- * @scp_int1_mask: SCP_INT1_MASK desired settings
  * @quirks: bitmask identifying deltas from the MIPI specification
+ * @sdca_interrupt_register_list: indicates which sets of SDCA interrupt status
+ * and masks are supported
+ * @commit_register_supported: is PCP_Commit register supported
+ * @scp_int1_mask: SCP_INT1_MASK desired settings
  * @clock_reg_supported: the Peripheral implements the clock base and scale
  * registers introduced with the SoundWire 1.2 specification. SDCA devices
  * do not need to set this boolean property as the registers are required.
@@ -363,6 +366,8 @@ struct sdw_slave_prop {
 	u32 source_ports;
 	u32 sink_ports;
 	u32 quirks;
+	u32 sdca_interrupt_register_list;
+	u8 commit_register_supported;
 	u8 scp_int1_mask;
 	bool clock_reg_supported;
 	bool use_domain_irq;
-- 
2.43.0