Re: [PATCH v5] PCI: Enable runtime pm of the host bridge

[Bjorn Helgaas]

On Thu, Oct 03, 2024 at 11:32:32AM +0530, Krishna chaitanya chundru wrote:
> The Controller driver is the parent device of the PCIe host bridge,
> PCI-PCI bridge and PCIe endpoint as shown below.
> 
>         PCIe controller(Top level parent & parent of host bridge)
>                         |
>                         v
>         PCIe Host bridge(Parent of PCI-PCI bridge)
>                         |
>                         v
>         PCI-PCI bridge(Parent of endpoint driver)
>                         |
>                         v
>                 PCIe endpoint driver
> 
> Now, when the controller device goes to runtime suspend, PM framework
> will check the runtime PM state of the child device (host bridge) and
> will find it to be disabled. So it will allow the parent (controller
> device) to go to runtime suspend. Only if the child device's state was
> 'active' it will prevent the parent to get suspended.
> 
> It is a property of the runtime PM framework that it can only
> follow continuous dependency chains.  That is, if there is a device
> with runtime PM disabled in a dependency chain, runtime PM cannot be
> enabled for devices below it and above it in that chain both at the
> same time.
> 
> Since runtime PM is disabled for host bridge, the state of the child
> devices under the host bridge is not taken into account by PM framework
> for the top level parent, PCIe controller. So PM framework, allows
> the controller driver to enter runtime PM irrespective of the state
> of the devices under the host bridge. And this causes the topology
> breakage and also possible PM issues like controller driver goes to
> runtime suspend while endpoint driver is doing some transfers.
> 
> Because of the above, in order to enable runtime PM for a PCIe
> controller device, one needs to ensure that runtime PM is enabled for
> all devices in every dependency chain between it and any PCIe endpoint
> (as runtime PM is enabled for PCIe endpoints).
> 
> This means that runtime PM needs to be enabled for the host bridge
> device, which is present in all of these dependency chains.
> 
> After this change, the host bridge device will be runtime-suspended
> by the runtime PM framework automatically after suspending its last
> child and it will be runtime-resumed automatically before resuming its
> first child which will allow the runtime PM framework to track
> dependencies between the host bridge device and all of its
> descendants.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

Applied to pci/pm for v6.13, thanks for your patience is working
through this!

> ---
> Changes in v5:
> - call pm_runtime_no_callbacks() as suggested by Rafael.
> - include the commit texts as suggested by Rafael.
> - Link to v4: https://lore.kernel.org/linux-pci/20240708-runtime_pm-v4-1-c02a3663243b@xxxxxxxxxxx/
> Changes in v4:
> - Changed pm_runtime_enable() to devm_pm_runtime_enable() (suggested by mayank)
> - Link to v3: https://lore.kernel.org/lkml/20240609-runtime_pm-v3-1-3d0460b49d60@xxxxxxxxxxx/
> Changes in v3:
> - Moved the runtime API call's from the dwc driver to PCI framework
>   as it is applicable for all (suggested by mani)
> - Updated the commit message.
> - Link to v2: https://lore.kernel.org/all/20240305-runtime_pm_enable-v2-1-a849b74091d1@xxxxxxxxxxx
> Changes in v2:
> - Updated commit message as suggested by mani.
> - Link to v1: https://lore.kernel.org/r/20240219-runtime_pm_enable-v1-1-d39660310504@xxxxxxxxxxx
> ---
> 
> ---
>  drivers/pci/probe.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 4f68414c3086..8409e1dde0d1 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -3106,6 +3106,11 @@ int pci_host_probe(struct pci_host_bridge *bridge)
>  		pcie_bus_configure_settings(child);
>  
>  	pci_bus_add_devices(bus);
> +
> +	pm_runtime_set_active(&bridge->dev);
> +	pm_runtime_no_callbacks(&bridge->dev);
> +	devm_pm_runtime_enable(&bridge->dev);
> +
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(pci_host_probe);
> 
> ---
> base-commit: c02d24a5af66a9806922391493205a344749f2c4
> change-id: 20241003-runtime_pm-655d48356c8b
> 
> Best regards,
> -- 
> Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
>