[PATCH v2] soundwire: intel_auxdevice: add kernel parameter for mclk divider
From: Bard Liao
Date: Thu Oct 03 2024 - 22:19:11 EST
From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
Add a kernel parameter to work-around discrepancies between hardware
and platform firmware, it's not unusual to see e.g. 38.4MHz listed in
_DSD properties as the SoundWire clock source, but the hardware may be
based on a 19.2 MHz mclk source.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
Signed-off-by: Bard Liao <yung-chuan.liao@xxxxxxxxxxxxxxx>
---
v2: Add description of the kernel parameter in in kernel-parameters.txt.
---
Documentation/admin-guide/kernel-parameters.rst | 1 +
Documentation/admin-guide/kernel-parameters.txt | 4 ++++
drivers/soundwire/intel_auxdevice.c | 12 ++++++++++--
3 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst
index fdea7c26ef80..a64130fd19bf 100644
--- a/Documentation/admin-guide/kernel-parameters.rst
+++ b/Documentation/admin-guide/kernel-parameters.rst
@@ -159,6 +159,7 @@ is applicable::
SCSI Appropriate SCSI support is enabled.
A lot of drivers have their options described inside
the Documentation/scsi/ sub-directory.
+ SDW SoundWire support is enabled.
SECURITY Different security models are enabled.
SELINUX SELinux support is enabled.
SERIAL Serial support is enabled.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 1518343bbe22..d7aee9ed5a1d 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -6060,6 +6060,10 @@
non-zero "wait" parameter. See weight_single
and weight_many.
+ sdw_mclk_divider=[SDW]
+ Specify the MCLK divider for Intel SoundWire buses in
+ case the BIOS does not provide the clock rate properly.
+
skew_tick= [KNL,EARLY] Offset the periodic timer tick per cpu to mitigate
xtime_lock contention on larger systems, and/or RCU lock
contention on all systems with CONFIG_MAXSMP set.
diff --git a/drivers/soundwire/intel_auxdevice.c b/drivers/soundwire/intel_auxdevice.c
index ae689d5d1ab9..599954d92752 100644
--- a/drivers/soundwire/intel_auxdevice.c
+++ b/drivers/soundwire/intel_auxdevice.c
@@ -41,6 +41,10 @@ static int md_flags;
module_param_named(sdw_md_flags, md_flags, int, 0444);
MODULE_PARM_DESC(sdw_md_flags, "SoundWire Intel Master device flags (0x0 all off)");
+static int mclk_divider;
+module_param_named(sdw_mclk_divider, mclk_divider, int, 0444);
+MODULE_PARM_DESC(sdw_mclk_divider, "SoundWire Intel mclk divider");
+
struct wake_capable_part {
const u16 mfg_id;
const u16 part_id;
@@ -142,8 +146,12 @@ static int sdw_master_read_intel_prop(struct sdw_bus *bus)
"intel-sdw-ip-clock",
&prop->mclk_freq);
- /* the values reported by BIOS are the 2x clock, not the bus clock */
- prop->mclk_freq /= 2;
+ if (mclk_divider)
+ /* use kernel parameter for BIOS or board work-arounds */
+ prop->mclk_freq /= mclk_divider;
+ else
+ /* the values reported by BIOS are the 2x clock, not the bus clock */
+ prop->mclk_freq /= 2;
fwnode_property_read_u32(link,
"intel-quirk-mask",
--
2.43.0