[PATCH v3 0/9] Add platform supports to MediaTek MT8188 SoC (part 2)

[Fei Shao]

Hi all,

This series is based on top of my previous "Add platform supports to
MediaTek MT8188 SoC" v3 series[*].

There's nothing to change or address in that series at the point of
writing, so I decided not to resend it and start this new "part 2"
series instead.
(if I need to update both series next time I might consider merging them
into one)

Specifically, this continues to introduce the following platform supports
in MediaTek MT8188 SoC to lay the groundwork for the board device trees:
- PCIe
- MIPI DSI
- video decoder and encoder
- JPEG decoder and encoder
- vdosys0 and vdosys1 display pipelines
- DP-INTF
- eDP and DP TX
- aliases

Please have a look and feedback are welcome, thanks.

[*]: https://lore.kernel.org/all/20240911143429.850071-1-fshao@xxxxxxxxxxxx/
[v1]: https://lore.kernel.org/all/20241002114614.847553-1-fshao@xxxxxxxxxxxx/
[v2]: https://lore.kernel.org/all/20241003070139.1461472-1-fshao@xxxxxxxxxxxx/

Regards,
Fei

Changes in v3:
- add the secondary MIPI DSI

Changes in v2:
- add linux,pci-domain to PCIe node
- add power domain to PCIe PHY node

Fei Shao (9):
  arm64: dts: mediatek: mt8188: Assign GCE aliases
  arm64: dts: mediatek: mt8188: Add PCIe nodes
  arm64: dts: mediatek: mt8188: Add MIPI DSI nodes
  arm64: dts: mediatek: mt8188: Add video decoder and encoder nodes
  arm64: dts: mediatek: mt8188: Add JPEG decoder and encoder nodes
  arm64: dts: mediatek: mt8188: Add display nodes for vdosys0
  arm64: dts: mediatek: mt8188: Add display nodes for vdosys1
  arm64: dts: mediatek: mt8188: Add DP-INTF nodes
  arm64: dts: mediatek: mt8188: Add eDP and DP TX nodes

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 668 +++++++++++++++++++++++
 1 file changed, 668 insertions(+)

-- 
2.47.0.rc0.187.ge670bccf7e-goog