Re: [PATCH net-next 8/9] net: phy: mediatek: Change mtk-ge-soc.c line wrapping
From: Russell King (Oracle)
Date: Fri Oct 04 2024 - 08:08:44 EST
Hi,
On Fri, Oct 04, 2024 at 06:24:12PM +0800, Sky Huang wrote:
> diff --git a/drivers/net/phy/mediatek/mtk-ge-soc.c b/drivers/net/phy/mediatek/mtk-ge-soc.c
> index 26c2183..cb6838b 100644
> --- a/drivers/net/phy/mediatek/mtk-ge-soc.c
> +++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
> @@ -295,7 +295,8 @@ static int cal_cycle(struct phy_device *phydev, int devad,
> ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
> MTK_PHY_RG_AD_CAL_CLK, reg_val,
> reg_val & MTK_PHY_DA_CAL_CLK, 500,
> - ANALOG_INTERNAL_OPERATION_MAX_US, false);
> + ANALOG_INTERNAL_OPERATION_MAX_US,
> + false);
This is fine.
> if (ret) {
> phydev_err(phydev, "Calibration cycle timeout\n");
> return ret;
> @@ -304,7 +305,7 @@ static int cal_cycle(struct phy_device *phydev, int devad,
> phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
> MTK_PHY_DA_CALIN_FLAG);
> ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >>
> - MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
> + MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
Before cleaning this up, please first make it propagate any error code
correctly (a bug fix):
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP);
if (ret < 0)
return ret;
ret >>= MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
and then you won't need to change it in this patch. A better solution to
the shift would be to look at FIELD_GET().
> phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret);
>
> return ret;
> @@ -394,38 +395,46 @@ static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf)
> }
>
> phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
> - MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10);
> + MTK_PHY_DA_TX_I2MPB_A_GBE_MASK,
> + (buf[0] + bias[0]) << 10);
Another cleanup would be to use FIELD_PREP() for these.
> -static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
> - BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
> - BIT(TRIGGER_NETDEV_LINK) |
> - BIT(TRIGGER_NETDEV_LINK_10) |
> - BIT(TRIGGER_NETDEV_LINK_100) |
> - BIT(TRIGGER_NETDEV_LINK_1000) |
> - BIT(TRIGGER_NETDEV_RX) |
> - BIT(TRIGGER_NETDEV_TX));
> +static const unsigned long supported_triggers =
> + (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
> + BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
> + BIT(TRIGGER_NETDEV_LINK) |
> + BIT(TRIGGER_NETDEV_LINK_10) |
> + BIT(TRIGGER_NETDEV_LINK_100) |
> + BIT(TRIGGER_NETDEV_LINK_1000) |
> + BIT(TRIGGER_NETDEV_RX) |
> + BIT(TRIGGER_NETDEV_TX));
The outer parens are unnecessary, and thus could be removed.
Thanks.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!