[PATCH v1 0/2] USB: xhci: add support for PWRON polarity invert (TI TUSB73x0)

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>

The TUSB73x0 is a USB 3.0 xHCI Host Controller Hub using a PCIe x1 Gen2
interface. The TUSB7320 supports up to two downstream ports, and the 
TUSB7340 supports up to four. It supports to configure the polarity of
the PWRONx# signals, which are used to control other peripherals.
In some systems, the default polarity needs to be inverted, which is
supported by the given hardware through the software configuration. This
patch series introduces TUSB73x0 PCIe device tree bindings and modifies the 
USB XHCI PCI driver to handle PWRONx# polarity via a device tree property.

TUSB73x0 datasheet: https://www.ti.com/lit/ds/symlink/tusb7320.pdf

Parth Pancholi (2):
  dt-bindings: usb: add TUSB73x0 PCIe
  USB: xhci: add support for PWRON polarity invert

 .../bindings/usb/ti,tusb73x0-pci.yaml         | 60 +++++++++++++++++++
 drivers/usb/host/xhci-pci.c                   |  3 +
 2 files changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml

-- 
2.39.5