[PATCH 03/13] media: i2c: ds90ub960: Fix use of non-existing registers on UB9702

[Tomi Valkeinen]

UB9702 doesn't have the registers for SP and EQ. Adjust the code in
ub960_rxport_wait_locks() to not use those registers for UB9702. As
these values are only used for a debug print here, there's no functional
change.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
---
 drivers/media/i2c/ds90ub960.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
index b1e848678218..24198b803eff 100644
--- a/drivers/media/i2c/ds90ub960.c
+++ b/drivers/media/i2c/ds90ub960.c
@@ -1577,16 +1577,24 @@ static int ub960_rxport_wait_locks(struct ub960_data *priv,
 
 		ub960_rxport_read16(priv, nport, UB960_RR_RX_FREQ_HIGH, &v);
 
-		ret = ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos);
-		if (ret)
-			return ret;
+		if (priv->hw_data->is_ub9702) {
+			dev_dbg(dev, "\trx%u: locked, freq %llu Hz\n",
+				nport, (v * 1000000ULL) >> 8);
+		} else {
+			ret = ub960_rxport_get_strobe_pos(priv, nport,
+							  &strobe_pos);
+			if (ret)
+				return ret;
 
-		ret = ub960_rxport_get_eq_level(priv, nport, &eq_level);
-		if (ret)
-			return ret;
+			ret = ub960_rxport_get_eq_level(priv, nport, &eq_level);
+			if (ret)
+				return ret;
 
-		dev_dbg(dev, "\trx%u: locked, SP: %d, EQ: %u, freq %llu Hz\n",
-			nport, strobe_pos, eq_level, (v * 1000000ULL) >> 8);
+			dev_dbg(dev,
+				"\trx%u: locked, SP: %d, EQ: %u, freq %llu Hz\n",
+				nport, strobe_pos, eq_level,
+				(v * 1000000ULL) >> 8);
+		}
 	}
 
 	return 0;

-- 
2.43.0