[PATCH net-next v2 7/9] net: phy: introduce ethtool_phy_ops to get and set phy configuration

[Maxime Chevallier]

Expose phy-specific configuration hooks to get and set the state of an
ethernet PHY's internal configuration.

So far, these parameters only include the isolation state of the PHY.

The .get_config() ethtool_phy_ops gets these status information from the
phy_device's internal flags, while the .set_config() operation allows
changing these configuration parameters.

Signed-off-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
---
V2 : Dropped loopback mode

 drivers/net/phy/phy.c        | 44 ++++++++++++++++++++++++++++++++++++
 drivers/net/phy/phy_device.c |  2 ++
 include/linux/ethtool.h      |  8 +++++++
 include/linux/phy.h          | 19 ++++++++++++++++
 4 files changed, 73 insertions(+)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 4f3e742907cb..5a689da060d1 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1811,3 +1811,47 @@ int phy_ethtool_nway_reset(struct net_device *ndev)
 	return ret;
 }
 EXPORT_SYMBOL(phy_ethtool_nway_reset);
+
+/**
+ * phy_get_config - Get PHY configuration parameters
+ * @phydev: the PHY device to act upon
+ * @phy_cfg:  The configuration to apply
+ */
+
+int phy_get_config(struct phy_device *phydev,
+		   struct phy_device_config *phy_cfg)
+{
+	mutex_lock(&phydev->lock);
+	phy_cfg->isolate = phydev->isolated;
+	mutex_unlock(&phydev->lock);
+
+	return 0;
+}
+
+/**
+ * phy_set_config - Set PHY configuration parameters
+ * @phydev: the PHY device to act upon
+ * @phy_cfg: the configuration to apply
+ * @extack: a netlink extack for useful error reporting
+ */
+
+int phy_set_config(struct phy_device *phydev,
+		   const struct phy_device_config *phy_cfg,
+		   struct netlink_ext_ack *extack)
+{
+	bool isolate_change;
+	int ret;
+
+	mutex_lock(&phydev->lock);
+	isolate_change = (phy_cfg->isolate != phydev->isolated);
+	mutex_unlock(&phydev->lock);
+
+	if (!isolate_change)
+		return 0;
+
+	ret = phy_isolate(phydev, phy_cfg->isolate);
+	if (ret)
+		NL_SET_ERR_MSG(extack, "Error while configuring PHY isolation");
+
+	return ret;
+}
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 9294b73c391a..1111a3cbcb02 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3857,6 +3857,8 @@ static const struct ethtool_phy_ops phy_ethtool_phy_ops = {
 	.get_plca_status	= phy_ethtool_get_plca_status,
 	.start_cable_test	= phy_start_cable_test,
 	.start_cable_test_tdr	= phy_start_cable_test_tdr,
+	.get_config		= phy_get_config,
+	.set_config		= phy_set_config,
 };
 
 static const struct phylib_stubs __phylib_stubs = {
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 12f6dc567598..480ee99a69a5 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -1140,6 +1140,7 @@ struct phy_device;
 struct phy_tdr_config;
 struct phy_plca_cfg;
 struct phy_plca_status;
+struct phy_device_config;
 
 /**
  * struct ethtool_phy_ops - Optional PHY device options
@@ -1151,6 +1152,8 @@ struct phy_plca_status;
  * @get_plca_status: Get PLCA configuration.
  * @start_cable_test: Start a cable test
  * @start_cable_test_tdr: Start a Time Domain Reflectometry cable test
+ * @get_config: Retrieve phy device configuration parameters
+ * @set_config: Set phy device configuration parameters
  *
  * All operations are optional (i.e. the function pointer may be set to %NULL)
  * and callers must take this into account. Callers must hold the RTNL lock.
@@ -1172,6 +1175,11 @@ struct ethtool_phy_ops {
 	int (*start_cable_test_tdr)(struct phy_device *phydev,
 				    struct netlink_ext_ack *extack,
 				    const struct phy_tdr_config *config);
+	int (*get_config)(struct phy_device *phydev,
+			  struct phy_device_config *phy_cfg);
+	int (*set_config)(struct phy_device *phydev,
+			  const struct phy_device_config *phy_cfg,
+			  struct netlink_ext_ack *extack);
 };
 
 /**
diff --git a/include/linux/phy.h b/include/linux/phy.h
index e43f7169c57d..662ba57cd0de 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -886,6 +886,20 @@ enum phy_led_modes {
 	__PHY_LED_MODES_NUM,
 };
 
+/**
+ * struct phy_device_config - General PHY device configuration parameters for
+ * status reporting and bulk configuration
+ *
+ * A structure containing generic PHY device information, allowing to expose
+ * internal status to userspace, and perform PHY configuration in a controlled
+ * manner.
+ *
+ * @isolate: The MII-side isolation status of the PHY
+ */
+struct phy_device_config {
+	bool isolate;
+};
+
 /**
  * struct phy_led: An LED driven by the PHY
  *
@@ -2085,6 +2099,11 @@ int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
 			     struct netlink_ext_ack *extack);
 int phy_ethtool_get_plca_status(struct phy_device *phydev,
 				struct phy_plca_status *plca_st);
+int phy_get_config(struct phy_device *phydev,
+		   struct phy_device_config *phy_cfg);
+int phy_set_config(struct phy_device *phydev,
+		   const struct phy_device_config *phy_cfg,
+		   struct netlink_ext_ack *extack);
 
 int __phy_hwtstamp_get(struct phy_device *phydev,
 		       struct kernel_hwtstamp_config *config);
-- 
2.46.1