Re: [PATCH v5 14/20] platform/x86: intel_atomisp2: Move to intel sub-directory
From: Robert Mast
Date: Sun Oct 06 2024 - 12:58:42 EST
Hi,
In an attempt to put the camera led on the T100ta (baytrail) back on to
repeat the success of Mauro on the ov2680 on cherry trail for the
MT9M114 I compiled this led-driver in the media-atomisp branch of hgoede
to try to put the camera back on by writing 1 to
/sys/class/leds/atomisp::camera/brightness
However nothing happened. At boot the camera led is on, but with my
Debian 12.7 install of bootia32.efi and the like the camera is already
off at the boot menu, so there is another trick used to shut it off even
before the kernel has been boot. Does any of you have any clue how to
get that camera back on for use in v4l? Mauro did so on the 20th of may
2020 for the ov2680 on Cherry Trail with a little help of Intel.
Or am I just too short sighted for trying to get light in /dev/video0
because of the lack of libcamera support?
Should v4l2-ctl have an answer about /dev/video0 as long as there is no
userspace-driver, or should I test differently?
Here a blog of my progress:
https://github.com/jfwells/linux-asus-t100ta/issues/4 with some dmesg
and config dumps.
Op 20-8-2021 om 13:04 schreef Andy Shevchenko:
From: Kate Hsuan <hpa@xxxxxxxxxx>
Move Intel AtomISP v2 drivers to intel sub-directory
to improve readability.
Signed-off-by: Kate Hsuan <hpa@xxxxxxxxxx>
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
MAINTAINERS | 4 +-
drivers/platform/x86/Kconfig | 34 ---------------
drivers/platform/x86/Makefile | 2 -
drivers/platform/x86/intel/Kconfig | 1 +
drivers/platform/x86/intel/Makefile | 1 +
drivers/platform/x86/intel/atomisp2/Kconfig | 43 +++++++++++++++++++
drivers/platform/x86/intel/atomisp2/Makefile | 9 ++++
.../atomisp2/led.c} | 0
.../atomisp2/pm.c} | 0
9 files changed, 56 insertions(+), 38 deletions(-)
create mode 100644 drivers/platform/x86/intel/atomisp2/Kconfig
create mode 100644 drivers/platform/x86/intel/atomisp2/Makefile
rename drivers/platform/x86/{intel_atomisp2_led.c => intel/atomisp2/led.c} (100%)
rename drivers/platform/x86/{intel_atomisp2_pm.c => intel/atomisp2/pm.c} (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index cf29f7154889..429b8b5c5283 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9212,13 +9212,13 @@ INTEL ATOMISP2 DUMMY / POWER-MANAGEMENT DRIVER
M: Hans de Goede <hdegoede@xxxxxxxxxx>
L: platform-driver-x86@xxxxxxxxxxxxxxx
S: Maintained
-F: drivers/platform/x86/intel_atomisp2_pm.c
+F: drivers/platform/x86/intel/atomisp2/pm.c
INTEL ATOMISP2 LED DRIVER
M: Hans de Goede <hdegoede@xxxxxxxxxx>
L: platform-driver-x86@xxxxxxxxxxxxxxx
S: Maintained
-F: drivers/platform/x86/intel_atomisp2_led.c
+F: drivers/platform/x86/intel/atomisp2/led.c
INTEL BIOS SAR INT1092 DRIVER
M: Shravan S <s.shravan@xxxxxxxxx>
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 55820fc60a63..81eaa00983bd 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -668,40 +668,6 @@ config THINKPAD_LMI
source "drivers/platform/x86/intel/Kconfig"
-config INTEL_ATOMISP2_LED
- tristate "Intel AtomISP2 camera LED driver"
- depends on GPIOLIB && LEDS_GPIO
- help
- Many Bay Trail and Cherry Trail devices come with a camera attached
- to Intel's Image Signal Processor. Linux currently does not have a
- driver for these, so they do not work as a camera. Some of these
- camera's have a LED which is controlled through a GPIO.
-
- Some of these devices have a firmware issue where the LED gets turned
- on at boot. This driver will turn the LED off at boot and also allows
- controlling the LED (repurposing it) through the sysfs LED interface.
-
- Which GPIO is attached to the LED is usually not described in the
- ACPI tables, so this driver contains per-system info about the GPIO
- inside the driver, this means that this driver only works on systems
- the driver knows about.
-
- To compile this driver as a module, choose M here: the module
- will be called intel_atomisp2_led.
-
-config INTEL_ATOMISP2_PM
- tristate "Intel AtomISP2 dummy / power-management driver"
- depends on PCI && IOSF_MBI && PM
- depends on !INTEL_ATOMISP
- help
- Power-management driver for Intel's Image Signal Processor found on
- Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
- is to turn the ISP off (put it in D3) to save power and to allow
- entering of S0ix modes.
-
- To compile this driver as a module, choose M here: the module
- will be called intel_atomisp2_pm.
-
config INTEL_HID_EVENT
tristate "INTEL HID Event"
depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 1b1f4337a77f..6c682114e4fe 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -71,8 +71,6 @@ obj-$(CONFIG_THINKPAD_LMI) += think-lmi.o
# Intel
obj-$(CONFIG_X86_PLATFORM_DRIVERS_INTEL) += intel/
-obj-$(CONFIG_INTEL_ATOMISP2_LED) += intel_atomisp2_led.o
-obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o
obj-$(CONFIG_INTEL_HID_EVENT) += intel-hid.o
obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o
obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index 0c044b31e822..e8e1bad38113 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -16,6 +16,7 @@ menuconfig X86_PLATFORM_DRIVERS_INTEL
if X86_PLATFORM_DRIVERS_INTEL
+source "drivers/platform/x86/intel/atomisp2/Kconfig"
source "drivers/platform/x86/intel/int1092/Kconfig"
source "drivers/platform/x86/intel/int33fe/Kconfig"
source "drivers/platform/x86/intel/int3472/Kconfig"
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index 9858657f3f39..8ce9894e5efe 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -4,6 +4,7 @@
# Intel x86 Platform-Specific Drivers
#
+obj-$(CONFIG_INTEL_ATOMISP2_PDX86) += atomisp2/
obj-$(CONFIG_INTEL_SAR_INT1092) += int1092/
obj-$(CONFIG_INTEL_CHT_INT33FE) += int33fe/
obj-$(CONFIG_INTEL_SKL_INT3472) += int3472/
diff --git a/drivers/platform/x86/intel/atomisp2/Kconfig b/drivers/platform/x86/intel/atomisp2/Kconfig
new file mode 100644
index 000000000000..35dd2be9d2a1
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/Kconfig
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+config INTEL_ATOMISP2_PDX86
+ bool
+
+config INTEL_ATOMISP2_LED
+ tristate "Intel AtomISP v2 camera LED driver"
+ depends on GPIOLIB && LEDS_GPIO
+ select INTEL_ATOMISP2_PDX86
+ help
+ Many Bay Trail and Cherry Trail devices come with a camera attached
+ to Intel's Image Signal Processor. Linux currently does not have a
+ driver for these, so they do not work as a camera. Some of these
+ camera's have a LED which is controlled through a GPIO.
+
+ Some of these devices have a firmware issue where the LED gets turned
+ on at boot. This driver will turn the LED off at boot and also allows
+ controlling the LED (repurposing it) through the sysfs LED interface.
+
+ Which GPIO is attached to the LED is usually not described in the
+ ACPI tables, so this driver contains per-system info about the GPIO
+ inside the driver, this means that this driver only works on systems
+ the driver knows about.
+
+ To compile this driver as a module, choose M here: the module
+ will be called intel_atomisp2_led.
+
+config INTEL_ATOMISP2_PM
+ tristate "Intel AtomISP v2 dummy / power-management driver"
+ depends on PCI && IOSF_MBI && PM
+ depends on !INTEL_ATOMISP
+ select INTEL_ATOMISP2_PDX86
+ help
+ Power-management driver for Intel's Image Signal Processor found on
+ Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
+ is to turn the ISP off (put it in D3) to save power and to allow
+ entering of S0ix modes.
+
+ To compile this driver as a module, choose M here: the module
+ will be called intel_atomisp2_pm.
diff --git a/drivers/platform/x86/intel/atomisp2/Makefile b/drivers/platform/x86/intel/atomisp2/Makefile
new file mode 100644
index 000000000000..96b1e877d1f1
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+intel_atomisp2_led-y := led.o
+obj-$(CONFIG_INTEL_ATOMISP2_LED) += intel_atomisp2_led.o
+intel_atomisp2_pm-y += pm.o
+obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o
diff --git a/drivers/platform/x86/intel_atomisp2_led.c b/drivers/platform/x86/intel/atomisp2/led.c
similarity index 100%
rename from drivers/platform/x86/intel_atomisp2_led.c
rename to drivers/platform/x86/intel/atomisp2/led.c
diff --git a/drivers/platform/x86/intel_atomisp2_pm.c b/drivers/platform/x86/intel/atomisp2/pm.c
similarity index 100%
rename from drivers/platform/x86/intel_atomisp2_pm.c
rename to drivers/platform/x86/intel/atomisp2/pm.c