Re: [PATCH v5 5/5] arm: dts: qcom-ipq5018-linksys-jamaica: Include dts from arm64

[Dmitry Baryshkov]

On Thu, Oct 03, 2024 at 07:28:04AM GMT, Karl Chan wrote:
> Build the Linksys EA9350 V3 device trees from the arm64 tree together with the ARM32 include to allow booting this device on ARM32.

-ETOOLONG. Please wrap the line at 75 chars per line.

While doing it please also add the reason for the change (32-bit
firmware on the router).

> 
> The approach to include device tree files from other architectures is
> inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is
> used to build the device tree for both ARM32 and ARM64.
> 
> Signed-off-by: Karl Chan <exxxxkc@xxxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/qcom/Makefile                         | 1 +
>  arch/arm/boot/dts/qcom/qcom-ipq5018-linksys-jamaica.dts | 2 ++
>  2 files changed, 3 insertions(+)
>  create mode 100644 arch/arm/boot/dts/qcom/qcom-ipq5018-linksys-jamaica.dts
> 
> diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
> index f06c6d425e91..147dbeb30a6a 100644
> --- a/arch/arm/boot/dts/qcom/Makefile
> +++ b/arch/arm/boot/dts/qcom/Makefile
> @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>  	qcom-ipq4019-ap.dk04.1-c3.dtb \
>  	qcom-ipq4019-ap.dk07.1-c1.dtb \
>  	qcom-ipq4019-ap.dk07.1-c2.dtb \
> +	qcom-ipq5018-linksys-jamaica.dtb \
>  	qcom-ipq8064-ap148.dtb \
>  	qcom-ipq8064-rb3011.dtb \
>  	qcom-msm8226-microsoft-dempsey.dtb \
> diff --git a/arch/arm/boot/dts/qcom/qcom-ipq5018-linksys-jamaica.dts b/arch/arm/boot/dts/qcom/qcom-ipq5018-linksys-jamaica.dts
> new file mode 100644
> index 000000000000..9a6ad767ebd7
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom/qcom-ipq5018-linksys-jamaica.dts
> @@ -0,0 +1,2 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +#include <arm64/qcom/ipq5018-linksys-jamaica.dts>
> -- 
> 2.46.1
> 

-- 
With best wishes
Dmitry