Re: [PATCH 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add wifi node

[Dmitry Baryshkov]

On Sun, Sep 29, 2024 at 07:29:07PM GMT, Jianhua Lu wrote:
> Add wifi node and this wifi module is connected to pice port.

Could you please add ath11k probe messages to the log? We might need to
add an additional node with the calibration variant.

> 
> Signed-off-by: Jianhua Lu <lujianhua000@xxxxxxxxx>
> ---
>  .../dts/qcom/sm8250-xiaomi-elish-common.dtsi    | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
> index ebea283f56ea..05a71462325c 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
> @@ -680,6 +680,23 @@ &pcie0_phy {
>  	status = "okay";
>  };
>  
> +&pcieport0 {
> +	wifi@0 {
> +		compatible = "pci17cb,1101";
> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> +		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> +		vddaon-supply = <&vreg_pmu_aon_0p59>;
> +		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> +		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> +		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> +		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> +		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
> +		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> +		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
> +	};
> +};
> +
>  &pm8150_gpios {
>  	vol_up_n: vol-up-n-state {
>  		pins = "gpio6";
> -- 
> 2.46.0
> 

-- 
With best wishes
Dmitry