[net] net: ftgmac100: fixed not check status from fixed phy

[Jacky Chou]

Add error handling from calling fixed_phy_register.
It may return some error, therefore, need to check the status.

And fixed_phy_register needs to bind a device node for mdio.
Add the mac device node for fixed_phy_register function.
This is a reference to this function, of_phy_register_fixed_link().

Fixes: e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI")
Signed-off-by: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index f3cc14cc757d..0b61f548fd18 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1906,7 +1906,12 @@ static int ftgmac100_probe(struct platform_device *pdev)
 			goto err_phy_connect;
 		}
 
-		phydev = fixed_phy_register(PHY_POLL, &ncsi_phy_status, NULL);
+		phydev = fixed_phy_register(PHY_POLL, &ncsi_phy_status, np);
+		if (IS_ERR(phydev)) {
+			dev_err(&pdev->dev, "failed to register fixed PHY device\n");
+			err = PTR_ERR(phydev);
+			goto err_phy_connect;
+		}
 		err = phy_connect_direct(netdev, phydev, ftgmac100_adjust_link,
 					 PHY_INTERFACE_MODE_MII);
 		if (err) {
-- 
2.25.1