[PATCH 3/4] arm64: dts: rockchip: Fix wakeup prop names on brcm BT nodes
From: Diederik de Haas
Date: Mon Oct 07 2024 - 06:59:11 EST
The "brcm,bluetooth.yaml" binding has 'device-wakeup-gpios' and
'host-wakeup-gpios' property names.
Fix the ones where '*-wake-gpios' was used.
Note that the "realtek,bluetooth.yaml" binding does use the
'*-wake-gpios' property names.
Signed-off-by: Diederik de Haas <didi.debian@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts | 4 ++--
arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
index 0c18406e4c59..16fd98698db3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
@@ -450,8 +450,8 @@ bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&pmucru CLK_RTC_32K>;
clock-names = "ext_clock";
- device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
- host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index de4c082dce07..7381bb751852 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -684,8 +684,8 @@ bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk817 1>;
clock-names = "lpo";
- device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
- host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
pinctrl-names = "default";
--
2.45.2