Re: [PATCH] usb: dwc3: core: Fix system suspend on TI AM62 platforms

[Roger Quadros]

Hi,

On 05/10/2024 04:04, Thinh Nguyen wrote:
> Hi,
> 
> On Tue, Oct 01, 2024, Roger Quadros wrote:
>> Since commit 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init"),
>> system suspend is broken on AM62 TI platforms.
>>
>> Before that commit, both DWC3_GUSB3PIPECTL_SUSPHY and DWC3_GUSB2PHYCFG_SUSPHY
>> bits (hence forth called 2 SUSPHY bits) were being set during core
>> initialization and even during core re-initialization after a system
>> suspend/resume.
>>
>> These bits are required to be set for system suspend/resume to work correctly
>> on AM62 platforms.
>>
>> Since that commit, the 2 SUSPHY bits are not set for DEVICE/OTG mode if gadget
>> driver is not loaded and started.
>> For Host mode, the 2 SUSPHY bits are set before the first system suspend but
>> get cleared at system resume during core re-init and are never set again.
>>
>> This patch resovles these two issues by ensuring the 2 SUSPHY bits are set
>> before system suspend and restored to the original state during system resume.
>>
>> Cc: stable@xxxxxxxxxxxxxxx # v6.9+
>> Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init")
>> Link: https://urldefense.com/v3/__https://lore.kernel.org/all/1519dbe7-73b6-4afc-bfe3-23f4f75d772f@xxxxxxxxxx/__;!!A4F2R9G_pg!ahChm4MaKd6VGYqbnM4X1_pY_jqavYDv5HvPFbmicKuhvFsBwlEFi1xO5itGuHmfjbRuUSzReJISf5-1gXpr$ 
>> Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx>
>> ---
>>  drivers/usb/dwc3/core.c | 16 ++++++++++++++++
>>  drivers/usb/dwc3/core.h |  2 ++
>>  2 files changed, 18 insertions(+)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 9eb085f359ce..1233922d4d54 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -2336,6 +2336,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>>  	u32 reg;
>>  	int i;
>>  
>> +	dwc->susphy_state = !!(dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) &
>> +			    DWC3_GUSB2PHYCFG_SUSPHY);
>> +
>>  	switch (dwc->current_dr_role) {
>>  	case DWC3_GCTL_PRTCAP_DEVICE:
>>  		if (pm_runtime_suspended(dwc->dev))
>> @@ -2387,6 +2390,11 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>>  		break;
>>  	}
>>  
>> +	if (!PMSG_IS_AUTO(msg)) {
>> +		if (!dwc->susphy_state)
>> +			dwc3_enable_susphy(dwc, true);
>> +	}
>> +
>>  	return 0;
>>  }
>>  
>> @@ -2454,6 +2462,14 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
>>  		break;
>>  	}
>>  
>> +	if (!PMSG_IS_AUTO(msg)) {
>> +		/* dwc3_core_init_for_resume() disables SUSPHY so just handle
>> +		 * the enable case
>> +		 */
> 
> Can we note that this is a particular behavior needed for AM62 here?
> And can we use this comment style:
> 
> /*
>  * xxxxx
>  * xxxxx
>  */

OK.

> 
> 
>> +		if (dwc->susphy_state)
> 
> Shouldn't we check for if (!dwc->susphy_state) and clear the susphy
> bits?

In that case it would have already been cleared so no need to check
and clear again.

> 
>> +			dwc3_enable_susphy(dwc, true);
> 
> The dwc3_enable_susphy() set and clear both GUSB3PIPECTL_SUSPHY and
> GUSB2PHYCFG_SUSPHY, perhaps we should split that function out so we can
> only need to set for GUSB2PHYCFG_SUSPHY since you only track for that.

As  dwc3_enable_susphy() sets and clears both GUSB3PIPECTL_SUSPHY and
GUSB2PHYCFG_SUSPHY together it doesn't really help to track both
separately, but just complicates things.

> 
>> +	}
>> +
>>  	return 0;
>>  }
>>  
>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>> index c71240e8f7c7..b2ed5aba4c72 100644
>> --- a/drivers/usb/dwc3/core.h
>> +++ b/drivers/usb/dwc3/core.h
>> @@ -1150,6 +1150,7 @@ struct dwc3_scratchpad_array {
>>   * @sys_wakeup: set if the device may do system wakeup.
>>   * @wakeup_configured: set if the device is configured for remote wakeup.
>>   * @suspended: set to track suspend event due to U3/L2.
>> + * @susphy_state: state of DWC3_GUSB2PHYCFG_SUSPHY before PM suspend.
>>   * @imod_interval: set the interrupt moderation interval in 250ns
>>   *			increments or 0 to disable.
>>   * @max_cfg_eps: current max number of IN eps used across all USB configs.
>> @@ -1382,6 +1383,7 @@ struct dwc3 {
>>  	unsigned		sys_wakeup:1;
>>  	unsigned		wakeup_configured:1;
>>  	unsigned		suspended:1;
>> +	unsigned		susphy_state:1;
>>  
>>  	u16			imod_interval;
>>  
>>
>> ---
>> base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc
>> change-id: 20240923-am62-lpm-usb-f420917bd707
>>
>> Best regards,
>> -- 
>> Roger Quadros <rogerq@xxxxxxxxxx>
>>
> 
> <rant/>
> While reviewing your change, I see that we misuse the
> dis_u2_susphy_quirk to make this property a conditional thing during
> suspend and resume for certain platform. That bugs me because we can't
> easily change it without the reported hardware to test.
> </rant>

No it is not conditional. if dis_u2_susphy_quirk or dis_u3_susphy_quirk
is set then we never enable the respective U2/U3 SUSPHY bit.

> 
> Thanks for the patch!
> 
> BR,
> Thinh

-- 
cheers,
-roger