[PATCH] arm64: dts: imx8mp: add cpuidle state "cpu-pd-wait"
From: Catalin Popescu
Date: Mon Oct 07 2024 - 09:44:41 EST
So far, only WFI is supported on i.MX8mp platform. Add support for
deeper cpuidle state "cpu-pd-wait" that would allow for better power
usage during runtime. This is a port from NXP downstream kernel.
Signed-off-by: Catalin Popescu <catalin.popescu@xxxxxxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index f3531cfb0d79..8b1e0ca248d1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -47,6 +47,20 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
+ idle-states {
+ entry-method = "psci";
+
+ cpu_pd_wait: cpu-pd-wait {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010033>;
+ local-timer-stop;
+ entry-latency-us = <1000>;
+ exit-latency-us = <700>;
+ min-residency-us = <2700>;
+ wakeup-latency-us = <1500>;
+ };
+ };
+
A53_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
@@ -65,6 +79,7 @@ A53_0: cpu@0 {
nvmem-cell-names = "speed_grade";
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
+ cpu-idle-states = <&cpu_pd_wait>;
};
A53_1: cpu@1 {
@@ -83,6 +98,7 @@ A53_1: cpu@1 {
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
+ cpu-idle-states = <&cpu_pd_wait>;
};
A53_2: cpu@2 {
@@ -101,6 +117,7 @@ A53_2: cpu@2 {
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
+ cpu-idle-states = <&cpu_pd_wait>;
};
A53_3: cpu@3 {
@@ -119,6 +136,7 @@ A53_3: cpu@3 {
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
+ cpu-idle-states = <&cpu_pd_wait>;
};
A53_L2: l2-cache0 {
base-commit: 58ca61c1a866bfdaa5e19fb19a2416764f847d75
prerequisite-patch-id: 0000000000000000000000000000000000000000
--
2.34.1