Re: [PATCH 2/3] dt-bindings: iio: magnetometer: document the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor

[Rob Herring (Arm)]

On Mon, 07 Oct 2024 15:14:39 +0200, Neil Armstrong wrote:
> Document the bindings for the Allegro MicroSystems ALS31300 3-D Linear Hall
> Effect Sensor controller by an I2C interface, mainly used in 3D head-on
> motion sensing applications.
> 
> The device can be configured with different sensitivities in factory,
> but the sensitivity value used to calculate value into the Gauss
> unit is not available from registers, thus the sensitivity is
> provided by the compatible/device-id string which is based
> on the part number as described in the datasheet page 2.
> 
> The datasheet is available on the product website at [1].
> 
> [1] https://www.allegromicro.com/en/products/sense/linear-and-angular-position/linear-position-sensor-ics/als31300
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
>  .../iio/magnetometer/allegro,als31300.yaml         | 43 ++++++++++++++++++++++
>  1 file changed, 43 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/magnetometer/allegro,als31300.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename
 	 $id: http://devicetree.org/schemas/iio/magnetometer/allegromicro,als31300.yaml
 	file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/magnetometer/allegro,als31300.yaml
Documentation/devicetree/bindings/iio/magnetometer/allegro,als31300.example.dtb: /example-0/i2c/sensor@61: failed to match any schema with compatible: ['allegromicro,als31300']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241007-topic-input-upstream-als31300-v1-2-2c240ea5cb77@xxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.