[PATCH v2 1/3] dt-bindings: spi: Add realtek,rtl9300-snand

[Chris Packham]

Add a dtschema for the SPI-NAND controller on the RTL9300 SoCs. The
controller supports
 * Serial/Dual/Quad data with
 * PIO and DMA data read/write operation
 * Configurable flash access timing

Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---

Notes:
    Changes in v2:
    - Add clocks
    - For now I've kept realtek,rtl9300-snand to identify the IP block used
      in the various rtl930x chips. If the consensus is to drop this I can
      send a v3 with an updated driver to add the chip specific complatibles.

 .../bindings/spi/realtek,rtl9300-snand.yaml   | 69 +++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/realtek,rtl9300-snand.yaml

diff --git a/Documentation/devicetree/bindings/spi/realtek,rtl9300-snand.yaml b/Documentation/devicetree/bindings/spi/realtek,rtl9300-snand.yaml
new file mode 100644
index 000000000000..2d01464e85e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/realtek,rtl9300-snand.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/realtek,rtl9300-snand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-NAND Flash Controller for Realtek RTL9300 SoCs
+
+maintainers:
+  - Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
+
+description:
+  The Realtek RTL9300 SoCs have a built in SPI-NAND controller. It supports
+  typical SPI-NAND page cache operations in single, dual or quad IO mode.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - realtek,rtl9301-snand
+          - realtek,rtl9302b-snand
+          - realtek,rtl9302c-snand
+          - realtek,rtl9303-snand
+      - const: realtek,rtl9300-snand
+
+  reg:
+    items:
+      - description: SPI NAND controller registers address and size
+
+  interrupts:
+    items:
+      - description: SPI NAND controller interrupt
+
+  clocks:
+    items:
+      - description: SPI NAND controller reference clock
+
+  clock-names:
+    items:
+      - const: spi
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@1a400 {
+      compatible = "realtek,rtl9302c-snand", "realtek,rtl9300-snand";
+      reg = <0x1a400 0x44>;
+      interrupt-parent = <&intc>;
+      interrupts = <19>;
+      clocks = <&lx_clk>;
+      clock-names = "spi";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        compatible = "spi-nand";
+        reg = <0>;
+      };
+    };
-- 
2.46.2