[PATCH v5 1/2] mtd: nand: davinci: add support for on-die ECC engine type

[Marcus Folkesson]

Some chips, e.g. Micron MT29F1G08ABBFAH4, has a mandatory on-die ECC.
Add "on-die" as ECC engine type in order to be compatible with those.

Signed-off-by: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
---
 drivers/mtd/nand/raw/davinci_nand.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 392678143a36b20b42c1827eee8203dc2e41889a..79e768d337ae12f6e8d7f21f1acd4e259f4f3020 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -66,6 +66,7 @@ struct davinci_nand_pdata {
 
 	/* none  == NAND_ECC_ENGINE_TYPE_NONE (strongly *not* advised!!)
 	 * soft  == NAND_ECC_ENGINE_TYPE_SOFT
+	 * on-die == NAND_ECC_ENGINE_TYPE_ON_DIE
 	 * else  == NAND_ECC_ENGINE_TYPE_ON_HOST, according to ecc_bits
 	 *
 	 * All DaVinci-family chips support 1-bit hardware ECC.
@@ -524,6 +525,8 @@ static struct davinci_nand_pdata
 				pdata->engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
 			if (!strncmp("hw", mode, 2))
 				pdata->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+			if (!strncmp("on-die", mode, 6))
+				pdata->engine_type = NAND_ECC_ENGINE_TYPE_ON_DIE;
 		}
 		if (!of_property_read_u32(pdev->dev.of_node,
 			"ti,davinci-ecc-bits", &prop))
@@ -580,6 +583,7 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
 
 	switch (chip->ecc.engine_type) {
 	case NAND_ECC_ENGINE_TYPE_NONE:
+	case NAND_ECC_ENGINE_TYPE_ON_DIE:
 		pdata->ecc_bits = 0;
 		break;
 	case NAND_ECC_ENGINE_TYPE_SOFT:
@@ -914,4 +918,3 @@ module_platform_driver(nand_davinci_driver);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Texas Instruments");
 MODULE_DESCRIPTION("Davinci NAND flash driver");
-

-- 
2.46.0