Re: [PATCH v3 0/3] Add support for Kontron OSM-S i.MX8MP SoM and carrier boards

[Frieder Schrempf]

On 04.09.24 10:53 AM, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> 
> Patch 1: board DT bindings
> Patch 2: OSM-S i.MX8MP SoM and BL carrier board devicetrees
> Patch 3: i.MX8MP SMARC module and eval carrier board devicetrees
> 
> Changes for v3:
> 
> * Address Shawn's review comments (thanks!)
> * Fix HDMI DDC interface
> * Fix gpio-hog pinctrl in DL devicetree
> * Fix DT check warnings in DL devicetree
> * Adjust LVDS panel node to match that of proposed DL i.MX8MM
> 
> Changes for v2:
> 
> DT bindings (patch1):
> * Add tags from Krzysztof and Conor (thanks!)
> 
> SMARC DTs (patch 3):
> * Fix GPIO labels
> * Add support for TPM chip on SMARC module
> * Disable PWM in favor of GPIO5 on SMARC carrier
> * Enable LCDIF node to make HDMI work
> * Add support for GPIO expanders on SMARC carrier
> * Remove SPI flash as its removable and should be in an overlay
> * Add CAN regulators to fix transceiver enable
> 
> Frieder Schrempf (3):
>   dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards
>   arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier
>     board
>   arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval
>     carrier

Gentle ping for this series. Shawn, can you apply this for v6.13, please?

Thanks
Frieder