RE: [PATCH v2 net-next 0/2] make PHY output RMII reference clock

[Wei Fang]

> -----Original Message-----
> From: Wei Fang
> Sent: 2024年10月8日 15:24
> To: davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx; kuba@xxxxxxxxxx;
> pabeni@xxxxxxxxxx; robh@xxxxxxxxxx; krzk+dt@xxxxxxxxxx;
> conor+dt@xxxxxxxxxx; andrew@xxxxxxx; f.fainelli@xxxxxxxxx;
> hkallweit1@xxxxxxxxx; Andrei Botila (OSS) <andrei.botila@xxxxxxxxxxx>;
> linux@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> netdev@xxxxxxxxxxxxxxx; imx@xxxxxxxxxxxxxxx
> Subject: [PATCH v2 net-next 0/2] make PHY output RMII reference clock
> 
> The TJA11xx PHYs have the capability to provide 50MHz reference clock
> in RMII mode and output on REF_CLK pin. Therefore, add the new property
> "nxp,rmii-refclk-output" to support this feature. This property is only
> available for PHYs which use nxp-c45-tja11xx driver, such as TJA1103,
> TJA1104, TJA1120 and TJA1121.
> 
> ---
> v2 Link:
> https://lore.kernel.org/netdev/20240823-jersey-conducive-70863dd6fd27@spu
> d/T/
> v3 Linl:
> https://lore.kernel.org/imx/20240826052700.232453-1-wei.fang@xxxxxxx/
> ---
> 
> Wei Fang (2):
>   dt-bindings: net: tja11xx: add "nxp,rmii-refclk-out" property
>   net: phy: c45-tja11xx: add support for outputing RMII reference clock
> 
>  .../devicetree/bindings/net/nxp,tja11xx.yaml  | 18 ++++++++++++
>  drivers/net/phy/nxp-c45-tja11xx.c             | 29 +++++++++++++++++--
>  drivers/net/phy/nxp-c45-tja11xx.h             |  1 +
>  3 files changed, 46 insertions(+), 2 deletions(-)
> 
> --
> 2.34.1

Sorry for the wrong "v2" descriptor in the tile, it should be "v4". :(