Re: [PATCH] arm64: dts: renesas: r9a09g057: Add OPP table

From: Geert Uytterhoeven
Date: Tue Oct 08 2024 - 06:08:37 EST


Hi Prabhakar,

On Fri, Oct 4, 2024 at 3:31 PM Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> Add OPP table for RZ/V2H(P) SoC.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
> @@ -20,6 +20,39 @@ audio_extal_clk: audio-clk {
> clock-frequency = <0>;
> };
>
> + /*
> + * The default cluster table is based on the assumption that the PLLCA55 clock
> + * frequency is set to 1.7GHz. The PLLCA55 clock frequency can be set to
> + * 1.7/1.6/1.5/1.1 GHz based on the BOOTPLLCA_0/1 pins (and additionally can be
> + * clocked to 1.8GHz as well). The table below should be overridden in the board
> + * DTS based on the PLLCA55 clock frequency.
> + */
> + cluster0_opp: opp-table-0 {
> + compatible = "operating-points-v2";
> +
> + opp-1700000000 {
> + opp-hz = /bits/ 64 <1700000000>;
> + opp-microvolt = <900000>;
> + clock-latency-ns = <300000>;
> + };
> + opp-850000000 {
> + opp-hz = /bits/ 64 <850000000>;
> + opp-microvolt = <900000>;

According to Table 10.1-2 ("Recommended Operating Range"), this should
be 800000 for this and all operating points below.

> + clock-latency-ns = <300000>;
> + };
> + opp-425000000 {
> + opp-hz = /bits/ 64 <425000000>;
> + opp-microvolt = <900000>;
> + clock-latency-ns = <300000>;
> + };
> + opp-212500000 {
> + opp-hz = /bits/ 64 <212500000>;
> + opp-microvolt = <900000>;
> + clock-latency-ns = <300000>;
> + opp-suspend;
> + };
> + };

The rest LGTM.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds