[PATCH 1/4] media: i2c: st-mipid02: fix mipid02_stream_enable error handling

[Alain Volmat]

Following addition of cascaded s_stream call within
mipid02_stream_enable and mipid02_stream_disable,
the mipid02_stream_enable error handling must be fixed to simply
disable the clocks & data lanes without also calling
again the s_stream of the source subdev.

Moreover, main control registers are reset to 0 for all cases
of error within the mipid02_stream_enable even if they haven't yet
been written. Correct this behavior by simply returning an
error when register clear are not necessary.

Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx>
---
 drivers/media/i2c/st-mipid02.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c
index b947a55281f0..bc637a651a22 100644
--- a/drivers/media/i2c/st-mipid02.c
+++ b/drivers/media/i2c/st-mipid02.c
@@ -480,7 +480,7 @@ static int mipid02_stream_enable(struct mipid02_dev *bridge)
 	int ret = -EINVAL;
 
 	if (!bridge->s_subdev)
-		goto error;
+		return ret;
 
 	memset(&bridge->r, 0, sizeof(bridge->r));
 
@@ -490,13 +490,13 @@ static int mipid02_stream_enable(struct mipid02_dev *bridge)
 	/* build registers content */
 	ret = mipid02_configure_from_rx(bridge, fmt);
 	if (ret)
-		goto error;
+		return ret;
 	ret = mipid02_configure_from_tx(bridge);
 	if (ret)
-		goto error;
+		return ret;
 	ret = mipid02_configure_from_code(bridge, fmt);
 	if (ret)
-		goto error;
+		return ret;
 
 	v4l2_subdev_unlock_state(state);
 
@@ -531,8 +531,10 @@ static int mipid02_stream_enable(struct mipid02_dev *bridge)
 	return 0;
 
 error:
+	cci_write(bridge->regmap, MIPID02_CLK_LANE_REG1, 0, &ret);
+	cci_write(bridge->regmap, MIPID02_DATA_LANE0_REG1, 0, &ret);
+	cci_write(bridge->regmap, MIPID02_DATA_LANE1_REG1, 0, &ret);
 	dev_err(&client->dev, "failed to stream on %d", ret);
-	mipid02_stream_disable(bridge);
 
 	return ret;
 }

-- 
2.25.1