Re: [PATCH v2 1/3] dt-bindings: spi: Add realtek,rtl9300-snand

[Rob Herring]

On Tue, Oct 08, 2024 at 01:23:05PM +1300, Chris Packham wrote:
> Add a dtschema for the SPI-NAND controller on the RTL9300 SoCs. The
> controller supports
>  * Serial/Dual/Quad data with
>  * PIO and DMA data read/write operation
>  * Configurable flash access timing
> 
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
> 
> Notes:
>     Changes in v2:
>     - Add clocks
>     - For now I've kept realtek,rtl9300-snand to identify the IP block used
>       in the various rtl930x chips. If the consensus is to drop this I can
>       send a v3 with an updated driver to add the chip specific complatibles.
> 
>  .../bindings/spi/realtek,rtl9300-snand.yaml   | 69 +++++++++++++++++++
>  1 file changed, 69 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/realtek,rtl9300-snand.yaml
> 
> diff --git a/Documentation/devicetree/bindings/spi/realtek,rtl9300-snand.yaml b/Documentation/devicetree/bindings/spi/realtek,rtl9300-snand.yaml
> new file mode 100644
> index 000000000000..2d01464e85e5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/realtek,rtl9300-snand.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/realtek,rtl9300-snand.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SPI-NAND Flash Controller for Realtek RTL9300 SoCs
> +
> +maintainers:
> +  - Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> +
> +description:
> +  The Realtek RTL9300 SoCs have a built in SPI-NAND controller. It supports
> +  typical SPI-NAND page cache operations in single, dual or quad IO mode.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - realtek,rtl9301-snand
> +          - realtek,rtl9302b-snand
> +          - realtek,rtl9302c-snand
> +          - realtek,rtl9303-snand
> +      - const: realtek,rtl9300-snand
> +
> +  reg:
> +    items:
> +      - description: SPI NAND controller registers address and size

Just 'maxItems: 1'. The description is fairly obvious.

> +
> +  interrupts:
> +    items:
> +      - description: SPI NAND controller interrupt

Same here.

> +
> +  clocks:
> +    items:
> +      - description: SPI NAND controller reference clock

And here.

> +
> +  clock-names:
> +    items:
> +      - const: spi
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +
> +allOf:
> +  - $ref: /schemas/spi/spi-controller.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    spi@1a400 {
> +      compatible = "realtek,rtl9302c-snand", "realtek,rtl9300-snand";
> +      reg = <0x1a400 0x44>;
> +      interrupt-parent = <&intc>;
> +      interrupts = <19>;
> +      clocks = <&lx_clk>;
> +      clock-names = "spi";
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      flash@0 {
> +        compatible = "spi-nand";
> +        reg = <0>;
> +      };
> +    };
> -- 
> 2.46.2
>