Re: [PATCH net-next 05/12] net: pse-pd: Add support for getting and setting port priority

[Oleksij Rempel]

On Wed, Oct 02, 2024 at 06:28:01PM +0200, Kory Maincent wrote:
> From: Kory Maincent (Dent Project) <kory.maincent@xxxxxxxxxxx>
> 
> This patch introduces the ability to configure the PSE PI port priority.
> Port priority is utilized by PSE controllers to determine which ports to
> turn off first in scenarios such as power budget exceedance.
> 
> The pis_prio_max value is used to define the maximum priority level
> supported by the controller. Both the current priority and the maximum
> priority are exposed to the user through the pse_ethtool_get_status call.
> 
> Signed-off-by: Kory Maincent <kory.maincent@xxxxxxxxxxx>

Acked-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>

Thank you!
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |