[PATCH 0/4] Add USB Support for QCS8300

[Krishna Kurapati]

This series aims at enabling USB on QCS8300 which has 2 USB controllers.
The primary controller is SuperSpeed capable and secondary one is
High Speed only capable. Both the High Speed Phys are Femto phys and the
SuperSpeed Phy is a QMP Uni Phy.

Device tree patches will sent separately. DT Binding checks done on
the binding patches. Flashed and verified working of NCM over primary
usb controller.

Krishna Kurapati (4):
  dt-bindings: usb: qcom,dwc3: Add QCS8300 to USB DWC3 bindings
  dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QCS8300
  dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add QCS8300 compatible
  phy: qcom: qmp: Add qmp configuration for QCS8300

 .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml   |  2 +
 .../bindings/phy/qcom,usb-snps-femto-v2.yaml  |  1 +
 .../devicetree/bindings/usb/qcom,dwc3.yaml    |  4 ++
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c       | 65 +++++++++++++++++++
 4 files changed, 72 insertions(+)

-- 
2.34.1