[PATCH 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300

[Krishna Kurapati]

Add support for USB controllers on QCS8300. The second
controller is only High Speed capable.

Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qcs8300.dtsi | 165 ++++++++++++++++++++++++++
 1 file changed, 165 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index 2c35f96c3f28..701b834e9b58 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -1363,6 +1363,171 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 				qcom,remote-pid = <5>;
 			};
 		};
+
+		usb_1_hsphy: phy@8904000 {
+			compatible = "qcom,qcs8300-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0x0 0x8904000 0x0 0x400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy: phy@8906000 {
+			compatible = "qcom,qcs8300-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0x0 0x08906000 0x0 0x400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@8907000 {
+			compatible = "qcom,qcs8300-qmp-usb3-uni-phy";
+			reg = <0x0 0x8907000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_CLKREF_EN>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_prim_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xe000>;
+				interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x80 0x0>;
+				phys = <&usb_1_hsphy>, <&usb_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+			};
+		};
+
+		usb_2: usb@a4f8800 {
+			compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a4f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_SLEEP_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
+
+			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
+
+			power-domains = <&gcc GCC_USB20_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB20_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			status = "disabled";
+
+			usb_2_dwc3: usb@a400000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a400000 0x0 0xe000>;
+				interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x20 0x0>;
+				phys = <&usb_2_hsphy>;
+				phy-names = "usb2-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+			};
+		};
 	};
 
 	arch_timer: timer {
-- 
2.34.1