[PATCH v5 net-next 2/2] net: phy: c45-tja11xx: add support for outputting RMII reference clock

[Wei Fang]

For TJA11xx PHYs, they have the capability to output 50MHz reference
clock on REF_CLK pin in RMII mode, which is called "revRMII" mode in
the PHY data sheet.

Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
---
V2 changes:
1. Change the property name.
2. Modify the subject and commit message.
V3 changes:
No changes.
V4 changes:
1. Change the property name based on patch 1.
V5 changes:
1. Fix a typo in the title.
2. Based on Russel's suggestion, add comment to MII_BASIC_CONFIG_REV
and the basic_config variable to make the code clearer.
---
 drivers/net/phy/nxp-c45-tja11xx.c | 30 +++++++++++++++++++++++++++++-
 drivers/net/phy/nxp-c45-tja11xx.h |  1 +
 2 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c
index 5af5ade4fc64..7e328c2a29a4 100644
--- a/drivers/net/phy/nxp-c45-tja11xx.c
+++ b/drivers/net/phy/nxp-c45-tja11xx.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/mii.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/phy.h>
 #include <linux/processor.h>
 #include <linux/property.h>
@@ -185,6 +186,8 @@
 
 #define NXP_C45_SKB_CB(skb)	((struct nxp_c45_skb_cb *)(skb)->cb)
 
+#define TJA11XX_REVERSE_MODE		BIT(0)
+
 struct nxp_c45_phy;
 
 struct nxp_c45_skb_cb {
@@ -1510,6 +1513,8 @@ static int nxp_c45_get_delays(struct phy_device *phydev)
 
 static int nxp_c45_set_phy_mode(struct phy_device *phydev)
 {
+	struct nxp_c45_phy *priv = phydev->priv;
+	u16 basic_config;
 	int ret;
 
 	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_ABILITIES);
@@ -1561,8 +1566,15 @@ static int nxp_c45_set_phy_mode(struct phy_device *phydev)
 			phydev_err(phydev, "rmii mode not supported\n");
 			return -EINVAL;
 		}
+
+		basic_config = MII_BASIC_CONFIG_RMII;
+
+		/* This is not PHY_INTERFACE_MODE_REVRMII */
+		if (priv->flags & TJA11XX_REVERSE_MODE)
+			basic_config |= MII_BASIC_CONFIG_REV;
+
 		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
-			      MII_BASIC_CONFIG_RMII);
+			      basic_config);
 		break;
 	case PHY_INTERFACE_MODE_SGMII:
 		if (!(ret & SGMII_ABILITY)) {
@@ -1623,6 +1635,20 @@ static int nxp_c45_get_features(struct phy_device *phydev)
 	return genphy_c45_pma_read_abilities(phydev);
 }
 
+static int nxp_c45_parse_dt(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	struct nxp_c45_phy *priv = phydev->priv;
+
+	if (!IS_ENABLED(CONFIG_OF_MDIO))
+		return 0;
+
+	if (of_property_read_bool(node, "nxp,rmii-refclk-out"))
+		priv->flags |= TJA11XX_REVERSE_MODE;
+
+	return 0;
+}
+
 static int nxp_c45_probe(struct phy_device *phydev)
 {
 	struct nxp_c45_phy *priv;
@@ -1642,6 +1668,8 @@ static int nxp_c45_probe(struct phy_device *phydev)
 
 	phydev->priv = priv;
 
+	nxp_c45_parse_dt(phydev);
+
 	mutex_init(&priv->ptp_lock);
 
 	phy_abilities = phy_read_mmd(phydev, MDIO_MMD_VEND1,
diff --git a/drivers/net/phy/nxp-c45-tja11xx.h b/drivers/net/phy/nxp-c45-tja11xx.h
index f364fca68f0b..8b5fc383752b 100644
--- a/drivers/net/phy/nxp-c45-tja11xx.h
+++ b/drivers/net/phy/nxp-c45-tja11xx.h
@@ -28,6 +28,7 @@ struct nxp_c45_phy {
 	int extts_index;
 	bool extts;
 	struct nxp_c45_macsec *macsec;
+	u32 flags;
 };
 
 #if IS_ENABLED(CONFIG_MACSEC)
-- 
2.34.1