[PATCH v3 1/2] scsi: ufs: core: check asymmetric connected lanes

[SEO HOYOUNG]

Performance problems may occur if there is a problem with the
asymmetric connected lane such as h/w failure.
Currently, only check connected lane for rx/tx is checked if it is not 0.
But it should also be checked if it is asymmetrically connected.

Signed-off-by: SEO HOYOUNG <hy50.seo@xxxxxxxxxxx>
---
 drivers/ufs/core/ufshcd.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 24a32e2fd75e..387eec6f19ef 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -4540,6 +4540,14 @@ static int ufshcd_get_max_pwr_mode(struct ufs_hba *hba)
 		return -EINVAL;
 	}
 
+	if (pwr_info->lane_rx != pwr_info->lane_tx) {
+		dev_err(hba->dev, "%s: asymmetric connected lanes. rx=%d, tx=%d\n",
+			__func__,
+				pwr_info->lane_rx,
+				pwr_info->lane_tx);
+		return -EINVAL;
+	}
+
 	/*
 	 * First, get the maximum gears of HS speed.
 	 * If a zero value, it means there is no HSGEAR capability.
-- 
2.26.0