Re: [PATCH v2] ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2

[Vasiliy Kovalev]

10.10.2024 08:17, Takashi Iwai wrote:
> On Thu, 10 Oct 2024 05:32:18 +0200,
> Kai-Heng Feng wrote:
> > On 2024/10/9 9:50 PM, Takashi Iwai wrote:
> > > On Wed, 09 Oct 2024 15:42:48 +0200,
> > > Vasiliy Kovalev wrote:
> > > > There is a problem with simultaneous audio output to headphones and
> > > > speakers, and when headphones are turned off, the speakers also turn
> > > > off and do not turn them on.
> > > >
> > > > However, it was found that if you boot linux immediately after windows,
> > > > there are no such problems. When comparing alsa-info, the only difference
> > > > is the different configuration of Node 0x1d:
> > > >
> > > > working conf. (windows): Pin-ctls: 0x80: HP
> > > > not working     (linux): Pin-ctls: 0xc0: OUT HP
> > > >
> > > > This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the
> > > > described problem.
> > > >
> > > > Signed-off-by: Vasiliy Kovalev <kovalev@xxxxxxxxxxxx>
> > >
> > > Thanks, applied now.
> >
> > Though this is already applied, is it possible to see if the issue
> > also happens on S4?
> >
> > Linux doesn't put PCI devices like HDA to D3 during shutdown and
> > reboot while Windows does, that might be the reason boot Linux after
> > Windows can workaround the issue.
> >
> > Linux does put PCI devices to D3 for hibernate (S4), so we can use it
> > as an experiment.
>
> Right, it should have been the cached version so that the setup is
> reapplied automatically; i.e. replace snd_hda_set_pin_ctl() with
> snd_hda_set_pin_ctl_cached().
>
> Vasiliy, care to test and submit an incremental fix?

Ok, I compiled the module with the proposed changes and sent it to the 
user for testing on a machine with this codec. After testing, I will 
write about the result.

> thanks,
>
> Takashi
--
Thanks,
Vasiliy Kovalev