Re: [PATCH v4 3/3] clk: twl: add TWL6030 support

[Roger Quadros]

Hi Andreas,

On 10/10/2024 10:43, Andreas Kemnade wrote:
> The TWL6030 has similar clocks, so add support for it. Take care of the
> resource grouping handling needed.
> 
> Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> ---
>  drivers/clk/Kconfig   |  2 +-
>  drivers/clk/clk-twl.c | 52 +++++++++++++++++++++++++++++++++++--------
>  2 files changed, 44 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 299bc678ed1b..82ec12f9b82c 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -291,7 +291,7 @@ config CLK_TWL
>  	help
>  	  Enable support for controlling the clock resources on TWL family
>  	  PMICs. These devices have some 32K clock outputs which can be
> -	  controlled by software. For now, only the TWL6032 clocks are
> +	  controlled by software. For now, the TWL6032 and TWL6030 clocks are
>  	  supported.
>  
>  config CLK_TWL6040
> diff --git a/drivers/clk/clk-twl.c b/drivers/clk/clk-twl.c
> index 1d684b358401..c04bcb61e260 100644
> --- a/drivers/clk/clk-twl.c
> +++ b/drivers/clk/clk-twl.c
> @@ -11,13 +11,29 @@
>  #include <linux/platform_device.h>
>  #include <linux/slab.h>
>  
> -#define VREG_STATE              2
> +#define VREG_STATE		2
> +#define VREG_GRP		0
>  #define TWL6030_CFG_STATE_OFF   0x00
>  #define TWL6030_CFG_STATE_ON    0x01
>  #define TWL6030_CFG_STATE_MASK  0x03
> +#define TWL6030_CFG_STATE_GRP_SHIFT	5
> +#define TWL6030_CFG_STATE_APP_SHIFT	2
> +#define TWL6030_CFG_STATE_APP_MASK	(0x03 << TWL6030_CFG_STATE_APP_SHIFT)
> +#define TWL6030_CFG_STATE_APP(v)	(((v) & TWL6030_CFG_STATE_APP_MASK) >>\
> +						TWL6030_CFG_STATE_APP_SHIFT)
> +#define P1_GRP BIT(0) /* processor power group */
> +#define P2_GRP BIT(1)
> +#define P3_GRP BIT(2)
> +#define ALL_GRP (P1_GRP | P2_GRP | P3_GRP)
> +
> +enum twl_type {
> +	TWL_TYPE_6030,
> +	TWL_TYPE_6032,
> +};
>  
>  struct twl_clock_info {
>  	struct device *dev;
> +	enum twl_type type;
>  	u8 base;
>  	struct clk_hw hw;
>  };
> @@ -56,14 +72,21 @@ static unsigned long twl_clks_recalc_rate(struct clk_hw *hw,
>  static int twl6032_clks_prepare(struct clk_hw *hw)
>  {
>  	struct twl_clock_info *cinfo = to_twl_clks_info(hw);
> -	int ret;
>  
> -	ret = twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE,
> -			   TWL6030_CFG_STATE_ON);
> -	if (ret < 0)
> -		dev_err(cinfo->dev, "clk prepare failed\n");
> +	if (cinfo->type == TWL_TYPE_6030) {
> +		int grp;
> +
> +		grp = twlclk_read(cinfo, TWL_MODULE_PM_RECEIVER, VREG_GRP);
> +		if (grp < 0)
> +			return grp;
>  
> -	return ret;
> +		return twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE,
> +				    grp << TWL6030_CFG_STATE_GRP_SHIFT |
> +				    TWL6030_CFG_STATE_ON);
> +	}
> +
> +	return twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE,
> +			    TWL6030_CFG_STATE_ON);
>  }
>  
>  static void twl6032_clks_unprepare(struct clk_hw *hw)
> @@ -71,8 +94,14 @@ static void twl6032_clks_unprepare(struct clk_hw *hw)
>  	struct twl_clock_info *cinfo = to_twl_clks_info(hw);
>  	int ret;
>  
> -	ret = twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE,
> -			   TWL6030_CFG_STATE_OFF);
> +	if (cinfo->type == TWL_TYPE_6032)

Shouldn't this be done for TWL_TYPE_6030?

> +		ret = twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE,
> +				   ALL_GRP << TWL6030_CFG_STATE_GRP_SHIFT |
> +				   TWL6030_CFG_STATE_OFF);
> +	else> +		ret = twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE,
> +				   TWL6030_CFG_STATE_OFF);
> +
>  	if (ret < 0)
>  		dev_err(cinfo->dev, "clk unprepare failed\n");
>  }
> @@ -138,6 +167,7 @@ static int twl_clks_probe(struct platform_device *pdev)
>  	for (i = 0; i < count; i++) {
>  		cinfo[i].base = hw_data[i].base;
>  		cinfo[i].dev = &pdev->dev;
> +		cinfo[i].type = platform_get_device_id(pdev)->driver_data;
>  		cinfo[i].hw.init = &hw_data[i].init;
>  		ret = devm_clk_hw_register(&pdev->dev, &cinfo[i].hw);
>  		if (ret) {
> @@ -159,7 +189,11 @@ static int twl_clks_probe(struct platform_device *pdev)
>  
>  static const struct platform_device_id twl_clks_id[] = {
>  	{
> +		.name = "twl6030-clk",
> +		.driver_data = TWL_TYPE_6030,
> +	}, {
>  		.name = "twl6032-clk",
> +		.driver_data = TWL_TYPE_6032,
>  	}, {
>  		/* sentinel */
>  	}

-- 
cheers,
-roger