Re: [PATCH 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300

[Dmitry Baryshkov]

On Thu, Oct 10, 2024 at 01:26:36AM GMT, Krishna Kurapati wrote:
> Enable primary USB controller on QCS8300 Ride platform and
> set the dr mode to peripheral mode.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> index 7eed19a694c3..3e925228379c 100644
> --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> @@ -265,3 +265,26 @@ &ufs_mem_phy {
>  	vdda-pll-supply = <&vreg_l5a>;
>  	status = "okay";
>  };
> +
> +&usb_1_hsphy {
> +	vdda-pll-supply = <&vreg_l7a>;
> +	vdda18-supply = <&vreg_l7c>;
> +	vdda33-supply = <&vreg_l9a>;
> +
> +	status = "okay";
> +};
> +
> +&usb_qmpphy {
> +	vdda-phy-supply = <&vreg_l7a>;
> +	vdda-pll-supply = <&vreg_l5a>;
> +
> +	status = "okay";
> +};
> +
> +&usb_1 {
> +	status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> +	dr_mode = "peripheral";

Is it actually USB peripheral only? Or USB-C which isn't handled yet?

> +};
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry