Re: (subset) [PATCH] mfd: rtc: bd7xxxx Drop IC name from IRQ

[Lee Jones]

On Thu, 10 Oct 2024, Lee Jones wrote:

> On Thu, 10 Oct 2024, Matti Vaittinen wrote:
> 
> > On 09/10/2024 17:29, Lee Jones wrote:
> > > On Thu, 26 Sep 2024 15:01:13 +0300, Matti Vaittinen wrote:
> > > > A few ROHM PMICs have an RTC block which can be controlled by the
> > > > rtc-bd70528 driver. The RTC driver needs the alarm interrupt information
> > > > from the parent MFD driver. The MFD driver provides the interrupt
> > > > information as a set of named interrupts, where the name is of form:
> > > > <PMIC model>-rtc-alm-<x>, where x is an alarm block number.
> > > > 
> > > > >From the RTC driver point of view it is irrelevant what the PMIC name
> > > > is. It is sufficient to know this is alarm interrupt for a block X. The
> > > > PMIC model information is carried to RTC via the platform device ID.
> > > > Hence, having the PMIC model in the interrupt name is only making things
> > > > more complex because the RTC driver needs to request differently named
> > > > interrupts on different PMICs, making code unnecessary complicated.
> > > > 
> > > > [...]
> > > 
> > > Applied, thanks!

Unapplied.

-- 
Lee Jones [李琼斯]