Re: [PATCH] iio: adc: ad7944: add namespace to T_QUIET_NS

[Jonathan Cameron]

On Thu, 10 Oct 2024 10:32:44 +0200
Nuno Sá <noname.nuno@xxxxxxxxx> wrote:

> On Wed, 2024-10-09 at 16:26 -0500, David Lechner wrote:
> > Add AD7944_ namespace to T_QUIET_NS. This is the preferred style. This
> > way the bad style won't be copied when we add more T_ macros.
> > 
> > Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx>
> > ---  
> 
> Reviewed-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
Applied to the togreg branch of iio.git.

Thanks,

Jonathan

> 
> >  drivers/iio/adc/ad7944.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iio/adc/ad7944.c b/drivers/iio/adc/ad7944.c
> > index 0f36138a7144..a5aea4e9f1a7 100644
> > --- a/drivers/iio/adc/ad7944.c
> > +++ b/drivers/iio/adc/ad7944.c
> > @@ -80,7 +80,7 @@ struct ad7944_adc {
> >  };
> >  
> >  /* quite time before CNV rising edge */
> > -#define T_QUIET_NS	20
> > +#define AD7944_T_QUIET_NS	20
> >  
> >  static const struct ad7944_timing_spec ad7944_timing_spec = {
> >  	.conv_ns = 420,
> > @@ -150,7 +150,7 @@ static int ad7944_3wire_cs_mode_init_msg(struct device
> > *dev, struct ad7944_adc *
> >  	 * CS is tied to CNV and we need a low to high transition to start
> > the
> >  	 * conversion, so place CNV low for t_QUIET to prepare for this.
> >  	 */
> > -	xfers[0].delay.value = T_QUIET_NS;
> > +	xfers[0].delay.value = AD7944_T_QUIET_NS;
> >  	xfers[0].delay.unit = SPI_DELAY_UNIT_NSECS;
> >  
> >  	/*
> > 
> > ---
> > base-commit: 96be67caa0f0420d4128cb67f07bbd7a6f49e03a
> > change-id: 20241009-iio-adc-ad7944-add-namespace-to-t_quiet_ns-a9ed69692718
> > 
> > Best regards,  
>