[PATCH 09/18] KVM: x86/mmu: Add a dedicated flag to track if A/D bits are globally enabled

[Sean Christopherson]

Add a dedicated flag to track if KVM has enabled A/D bits at the module
level, instead of inferring the state based on whether or not the MMU's
shadow_accessed_mask is non-zero.  This will allow defining and using
shadow_accessed_mask even when A/D bits aren't used by hardware.

Signed-off-by: Sean Christopherson <seanjc@xxxxxxxxxx>
---
 arch/x86/kvm/mmu/mmu.c     |  6 +++---
 arch/x86/kvm/mmu/spte.c    |  6 ++++++
 arch/x86/kvm/mmu/spte.h    | 20 +++++++++-----------
 arch/x86/kvm/mmu/tdp_mmu.c |  4 ++--
 4 files changed, 20 insertions(+), 16 deletions(-)

diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index a72ecac63e07..06fb0fd3f87d 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -3350,7 +3350,7 @@ static bool page_fault_can_be_fast(struct kvm *kvm, struct kvm_page_fault *fault
 	 *    by setting the Writable bit, which can be done out of mmu_lock.
 	 */
 	if (!fault->present)
-		return !kvm_ad_enabled();
+		return !kvm_ad_enabled;
 
 	/*
 	 * Note, instruction fetches and writes are mutually exclusive, ignore
@@ -3485,7 +3485,7 @@ static int fast_page_fault(struct kvm_vcpu *vcpu, struct kvm_page_fault *fault)
 		 * uses A/D bits for non-nested MMUs.  Thus, if A/D bits are
 		 * enabled, the SPTE can't be an access-tracked SPTE.
 		 */
-		if (unlikely(!kvm_ad_enabled()) && is_access_track_spte(spte))
+		if (unlikely(!kvm_ad_enabled) && is_access_track_spte(spte))
 			new_spte = restore_acc_track_spte(new_spte);
 
 		/*
@@ -5462,7 +5462,7 @@ kvm_calc_tdp_mmu_root_page_role(struct kvm_vcpu *vcpu,
 	role.efer_nx = true;
 	role.smm = cpu_role.base.smm;
 	role.guest_mode = cpu_role.base.guest_mode;
-	role.ad_disabled = !kvm_ad_enabled();
+	role.ad_disabled = !kvm_ad_enabled;
 	role.level = kvm_mmu_get_tdp_level(vcpu);
 	role.direct = true;
 	role.has_4_byte_gpte = false;
diff --git a/arch/x86/kvm/mmu/spte.c b/arch/x86/kvm/mmu/spte.c
index 030813781a63..c9543625dda2 100644
--- a/arch/x86/kvm/mmu/spte.c
+++ b/arch/x86/kvm/mmu/spte.c
@@ -24,6 +24,8 @@ static bool __ro_after_init allow_mmio_caching;
 module_param_named(mmio_caching, enable_mmio_caching, bool, 0444);
 EXPORT_SYMBOL_GPL(enable_mmio_caching);
 
+bool __read_mostly kvm_ad_enabled;
+
 u64 __read_mostly shadow_host_writable_mask;
 u64 __read_mostly shadow_mmu_writable_mask;
 u64 __read_mostly shadow_nx_mask;
@@ -414,6 +416,8 @@ EXPORT_SYMBOL_GPL(kvm_mmu_set_me_spte_mask);
 
 void kvm_mmu_set_ept_masks(bool has_ad_bits, bool has_exec_only)
 {
+	kvm_ad_enabled		= has_ad_bits;
+
 	shadow_user_mask	= VMX_EPT_READABLE_MASK;
 	shadow_accessed_mask	= has_ad_bits ? VMX_EPT_ACCESS_BIT : 0ull;
 	shadow_dirty_mask	= has_ad_bits ? VMX_EPT_DIRTY_BIT : 0ull;
@@ -447,6 +451,8 @@ void kvm_mmu_reset_all_pte_masks(void)
 	u8 low_phys_bits;
 	u64 mask;
 
+	kvm_ad_enabled = true;
+
 	/*
 	 * If the CPU has 46 or less physical address bits, then set an
 	 * appropriate mask to guard against L1TF attacks. Otherwise, it is
diff --git a/arch/x86/kvm/mmu/spte.h b/arch/x86/kvm/mmu/spte.h
index 574ca9a1fcab..908cb672c4e1 100644
--- a/arch/x86/kvm/mmu/spte.h
+++ b/arch/x86/kvm/mmu/spte.h
@@ -167,6 +167,15 @@ static_assert(!(SHADOW_NONPRESENT_VALUE & SPTE_MMU_PRESENT_MASK));
 #define SHADOW_NONPRESENT_VALUE	0ULL
 #endif
 
+
+/*
+ * True if A/D bits are supported in hardware and are enabled by KVM.  When
+ * enabled, KVM uses A/D bits for all non-nested MMUs.  Because L1 can disable
+ * A/D bits in EPTP12, SP and SPTE variants are needed to handle the scenario
+ * where KVM is using A/D bits for L1, but not L2.
+ */
+extern bool __read_mostly kvm_ad_enabled;
+
 extern u64 __read_mostly shadow_host_writable_mask;
 extern u64 __read_mostly shadow_mmu_writable_mask;
 extern u64 __read_mostly shadow_nx_mask;
@@ -285,17 +294,6 @@ static inline bool is_ept_ve_possible(u64 spte)
 	       (spte & VMX_EPT_RWX_MASK) != VMX_EPT_MISCONFIG_WX_VALUE;
 }
 
-/*
- * Returns true if A/D bits are supported in hardware and are enabled by KVM.
- * When enabled, KVM uses A/D bits for all non-nested MMUs.  Because L1 can
- * disable A/D bits in EPTP12, SP and SPTE variants are needed to handle the
- * scenario where KVM is using A/D bits for L1, but not L2.
- */
-static inline bool kvm_ad_enabled(void)
-{
-	return !!shadow_accessed_mask;
-}
-
 static inline bool sp_ad_disabled(struct kvm_mmu_page *sp)
 {
 	return sp->role.ad_disabled;
diff --git a/arch/x86/kvm/mmu/tdp_mmu.c b/arch/x86/kvm/mmu/tdp_mmu.c
index bc9e2f50dc80..f77927b57962 100644
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -1075,7 +1075,7 @@ static int tdp_mmu_map_handle_target_level(struct kvm_vcpu *vcpu,
 static int tdp_mmu_link_sp(struct kvm *kvm, struct tdp_iter *iter,
 			   struct kvm_mmu_page *sp, bool shared)
 {
-	u64 spte = make_nonleaf_spte(sp->spt, !kvm_ad_enabled());
+	u64 spte = make_nonleaf_spte(sp->spt, !kvm_ad_enabled);
 	int ret = 0;
 
 	if (shared) {
@@ -1491,7 +1491,7 @@ static bool tdp_mmu_need_write_protect(struct kvm_mmu_page *sp)
 	 * from level, so it is valid to key off any shadow page to determine if
 	 * write protection is needed for an entire tree.
 	 */
-	return kvm_mmu_page_ad_need_write_protect(sp) || !kvm_ad_enabled();
+	return kvm_mmu_page_ad_need_write_protect(sp) || !kvm_ad_enabled;
 }
 
 static void clear_dirty_gfn_range(struct kvm *kvm, struct kvm_mmu_page *root,
-- 
2.47.0.rc1.288.g06298d1525-goog