[PATCH 1/2] i2c: xiic: Relocate xiic_i2c_runtime_suspend and xiic_i2c_runtime_resume to facilitate atomic mode

[Manikanta Guntupalli]

Relocate xiic_i2c_runtime_suspend and xiic_i2c_runtime_resume functions
to avoid prototype statements in atomic mode changes.

Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
---
 drivers/i2c/busses/i2c-xiic.c | 46 +++++++++++++++++------------------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 4c89aad02451..052bae4fc664 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -238,6 +238,29 @@ static const struct timing_regs timing_reg_values[] = {
 static int xiic_start_xfer(struct xiic_i2c *i2c, struct i2c_msg *msgs, int num);
 static void __xiic_start_xfer(struct xiic_i2c *i2c);
 
+static int __maybe_unused xiic_i2c_runtime_suspend(struct device *dev)
+{
+	struct xiic_i2c *i2c = dev_get_drvdata(dev);
+
+	clk_disable(i2c->clk);
+
+	return 0;
+}
+
+static int __maybe_unused xiic_i2c_runtime_resume(struct device *dev)
+{
+	struct xiic_i2c *i2c = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_enable(i2c->clk);
+	if (ret) {
+		dev_err(dev, "Cannot enable clock.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 /*
  * For the register read and write functions, a little-endian and big-endian
  * version are necessary. Endianness is detected during the probe function.
@@ -1365,29 +1388,6 @@ static void xiic_i2c_remove(struct platform_device *pdev)
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 }
 
-static int __maybe_unused xiic_i2c_runtime_suspend(struct device *dev)
-{
-	struct xiic_i2c *i2c = dev_get_drvdata(dev);
-
-	clk_disable(i2c->clk);
-
-	return 0;
-}
-
-static int __maybe_unused xiic_i2c_runtime_resume(struct device *dev)
-{
-	struct xiic_i2c *i2c = dev_get_drvdata(dev);
-	int ret;
-
-	ret = clk_enable(i2c->clk);
-	if (ret) {
-		dev_err(dev, "Cannot enable clock.\n");
-		return ret;
-	}
-
-	return 0;
-}
-
 static const struct dev_pm_ops xiic_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(xiic_i2c_runtime_suspend,
 			   xiic_i2c_runtime_resume, NULL)
-- 
2.34.1