[PATCH v6 1/8] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Pull pinctrl node changes from MT6795 document

[Yassine Oudjana]

From: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>

mediatek,pinctrl-mt6795.yaml has different node name patterns which match
bindings of other MediaTek pin controllers, ref for pinmux-node.yaml which
has a description of the pinmux property, as well as some additional
descriptions for some pin configuration properties. Pull those changes
into mediatek,mt6779-pinctrl.yaml and adjust the example DTS to match in
preparation to combine the MT6795 document into it.

Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
---
 .../pinctrl/mediatek,mt6779-pinctrl.yaml      | 38 ++++++++++++++-----
 1 file changed, 28 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index 3bbc00df5548d..352a88d7b135e 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -111,12 +111,12 @@ allOf:
         - "#interrupt-cells"
 
 patternProperties:
-  '-[0-9]*$':
+  '-pins$':
     type: object
     additionalProperties: false
 
     patternProperties:
-      '-pins*$':
+      '^pins':
         type: object
         description:
           A pinctrl node should contain at least one subnodes representing the
@@ -124,7 +124,9 @@ patternProperties:
           pins it needs, and how they should be configured, with regard to muxer
           configuration, pullups, drive strength, input enable/disable and input
           schmitt.
-        $ref: /schemas/pinctrl/pincfg-node.yaml
+        allOf:
+          - $ref: pinmux-node.yaml
+          - $ref: pincfg-node.yaml
 
         properties:
           pinmux:
@@ -135,9 +137,25 @@ patternProperties:
 
           bias-disable: true
 
-          bias-pull-up: true
-
-          bias-pull-down: true
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: Pull up PUPD/R0/R1 type define value.
+            description: |
+              For normal pull up type, it is not necessary to specify R1R0
+              values; When pull up type is PUPD/R0/R1, adding R1R0 defines
+              will set different resistance values.
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: Pull down PUPD/R0/R1 type define value.
+            description: |
+              For normal pull down type, it is not necessary to specify R1R0
+              values; When pull down type is PUPD/R0/R1, adding R1R0 defines
+              will set different resistance values.
 
           input-enable: true
 
@@ -221,8 +239,8 @@ examples:
             #interrupt-cells = <2>;
             interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
 
-            mmc0_pins_default: mmc0-0 {
-                cmd-dat-pins {
+            mmc0_pins_default: mmc0-pins {
+                pins-cmd-dat {
                     pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>,
                         <PINMUX_GPIO172__FUNC_MSDC0_DAT1>,
                         <PINMUX_GPIO169__FUNC_MSDC0_DAT2>,
@@ -235,11 +253,11 @@ examples:
                     input-enable;
                     mediatek,pull-up-adv = <1>;
                 };
-                clk-pins {
+                pins-clk {
                     pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>;
                     mediatek,pull-down-adv = <2>;
                 };
-                rst-pins {
+                pins-rst {
                     pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>;
                     mediatek,pull-up-adv = <0>;
                 };
-- 
2.46.2