Re: [PATCH v3 1/9] dt-bindings: can: m_can: Add wakeup properties

[Krzysztof Kozlowski]

On Fri, Oct 11, 2024 at 03:16:38PM +0200, Markus Schneider-Pargmann wrote:
> m_can can be a wakeup source on some devices. Especially on some of the
> am62* SoCs pins, connected to m_can in the mcu, can be used to wakeup
> the SoC.
> 
> The wakeup-source property defines on which devices m_can can be used
> for wakeup.
> 
> The pins associated with m_can have to have a special configuration to
> be able to wakeup the SoC. This configuration is described in the wakeup
> pinctrl state while the default state describes the default
> configuration.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/net/can/bosch,m_can.yaml       | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

Best regards,
Krzysztof