The way of implementing a flip option follows the existing
panel-samsung-s6e8aa0.c [1][2][3].
The value to flip the screen is taken from a downstream kernel file of
a similar but older panel [4]. The mipi clock [5] for the new panel
samsung-s6e88a0-ams427ap24 matches 461 MHz and a hardware read-out of the
0xcb values corresponds to revision R01 of that older panel [6]. Although
for samsung-s6e88a0-ams427ap24 that's in non-flipped state while in this
older driver it seems to be the other way around. Further up there is a
hint [7] basically saying for revision R01 to change the first word of the
0xcb command from 0x06 to 0x0e, which is actually setting BIT(3) of that
word. This causes a horizontal flip.
[1] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L103
[2] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L207-L211
[3] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L954-L974
[4] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c
[5] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L2027-L2028
[6] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L137-L151
[7] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L66-L74
Signed-off-by: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
---
.../drm/panel/panel-samsung-s6e88a0-ams427ap24.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams427ap24.c b/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams427ap24.c
index 657120d7dd33..4d5c494e03ae 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams427ap24.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams427ap24.c
@@ -32,6 +32,7 @@ struct s6e88a0_ams427ap24 {
struct mipi_dsi_device *dsi;
struct regulator_bulk_data *supplies;
struct gpio_desc *reset_gpio;
+ bool flip_horizontal;
bool prepared;
};
@@ -539,6 +540,10 @@ static int s6e88a0_ams427ap24_on(struct s6e88a0_ams427ap24 *ctx)
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xcc, 0x4c);
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf2, 0x03, 0x0d);
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf1, 0xa5, 0xa5);
+
+ if (ctx->flip_horizontal)
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xcb, 0x0e);
+
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0xa5, 0xa5);
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfc, 0xa5, 0xa5);
@@ -673,6 +678,15 @@ static int s6e88a0_ams427ap24_register_backlight(struct s6e88a0_ams427ap24 *ctx)
return ret;
}
+static void s6e88a0_ams427ap24_parse_dt(struct s6e88a0_ams427ap24 *ctx)
+{
+ struct mipi_dsi_device *dsi = ctx->dsi;
+ struct device *dev = &dsi->dev;
+ struct device_node *np = dev->of_node;
+
+ ctx->flip_horizontal = of_property_read_bool(np, "flip-horizontal");
+}
+
static int s6e88a0_ams427ap24_probe(struct mipi_dsi_device *dsi)
{
struct device *dev = &dsi->dev;
@@ -707,6 +721,8 @@ static int s6e88a0_ams427ap24_probe(struct mipi_dsi_device *dsi)
DRM_MODE_CONNECTOR_DSI);
ctx->panel.prepare_prev_first = true;
+ s6e88a0_ams427ap24_parse_dt(ctx);
+
ret = s6e88a0_ams427ap24_register_backlight(ctx);
if (ret < 0)
return ret;
--
2.39.5