Re: [PATCH RESEND 0/2] Misc OMAP GPIO/UART fixes

[Kevin Hilman]

Judith Mendez <jm@xxxxxx> writes:

> This patch series carries some miscellaneous
> OMAP driver fixes for GPIO and UART drivers.
>
> For GPIO, add gpio_enable and gpio_disable calls
> to gpio-omap which fixes an issue where if there
> is an irq storm, serial console is unresponsive.
>
> For UART, move pm_runtime_get_sync since the
> current order of omap_8250_rx_dma_flush and
> pm_runtime_get_sync calls are set in a way that
> when omap_8250_shutdown returns, dma->rx_running
> is set and this causes issues next time the UART
> is re-opened.

Could you summarize which OMAP platforms this was tested on?

Thanks,

Kevin