Re: [PATCH 0/4] Add USB Support for QCS8300

[Vinod Koul]

On Thu, 10 Oct 2024 01:23:44 +0530, Krishna Kurapati wrote:
> This series aims at enabling USB on QCS8300 which has 2 USB controllers.
> The primary controller is SuperSpeed capable and secondary one is
> High Speed only capable. Both the High Speed Phys are Femto phys and the
> SuperSpeed Phy is a QMP Uni Phy.
> 
> Device tree patches will sent separately. DT Binding checks done on
> the binding patches. Flashed and verified working of NCM over primary
> usb controller.
> 
> [...]

Applied, thanks!

[1/4] dt-bindings: usb: qcom,dwc3: Add QCS8300 to USB DWC3 bindings
      commit: 3624fa00ae76be6a93d46071db12bf9218090cb4
[2/4] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QCS8300
      commit: c5a3519eae7c491646a87c4861e91f1a1a9f461e
[3/4] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add QCS8300 compatible
      commit: c2b174209bbb3341444c899f0a06f21eb953b1f0
[4/4] phy: qcom: qmp: Add qmp configuration for QCS8300
      commit: 5ee213bdbc6c784c28fc9e2dbb5243906e1f8217

Best regards,
-- 
~Vinod