RE:(2) [PATCH v2] libf2fs: Fix calculation of usable segments for single

[Yonggil Song]

> On 10/10, Yonggil Song wrote:
> > There was a problem that did not subtract the super block area when calculating
> > the usable segments for a single zoned device with a conventional zone.
> > This resulted in incorrect the overprovision and reserved area.
> > 
> > 	<256MiB legacy block + zoned block w/ 32MiB zone size>
> > 	Info: Overprovision ratio = 3.570%
> > 	Info: Overprovision segments = 656 (GC reserved = 560)
> > 
> > 	<8 conventional zone + 1016 sequential zone w/ 32MiB zone size>
> > 	Info: Overprovision ratio = 3.700%
> > 	Info: Overprovision segments = 676 (GC reserved = 578)
> > 
> > This patch addresses the problem by subtracting the super block area when
> > there is only one zoned device.
> > 
> > Signed-off-by: Yonggil Song <yonggil.song@xxxxxxxxxxx>
> > ---
> >  lib/libf2fs_zoned.c | 5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/lib/libf2fs_zoned.c b/lib/libf2fs_zoned.c
> > index 89ba5ad73a76..1a0985378789 100644
> > --- a/lib/libf2fs_zoned.c
> > +++ b/lib/libf2fs_zoned.c
> > @@ -555,6 +555,11 @@ uint32_t f2fs_get_usable_segments(struct f2fs_super_block *sb)
> >  	}
> >  	usable_segs -= (get_sb(main_blkaddr) - get_sb(segment0_blkaddr)) >>
> >  						get_sb(log_blocks_per_seg);
> > +
> > +	/* single zoned device needs to remove a super block area */
> > +	if (c.ndevs == 1 && c.devices[0].zoned_model == F2FS_ZONED_HM)
> 
> Does this work?
> 
Yes, it works.

I have attached the results of test on null_blk below.
If you have any concerns, please feedback.

						before				after
legacy block (32GB)				136 (GC reserved = 130)		136 (GC reserved = 130)
single zoned block				676 (GC reserved = 578)		656 (GC reserved = 560)
(32GB, 32MB zone, 8 conv, 1016 seq)
legacy + zoned multi				656 (GC reserved = 560)		656 (GC reserved = 560)
(32GB, 256MB legacy block + 32MB zone, 1016 seq)

Thanks.
> > +		usable_segs -= (get_sb(segment0_blkaddr) >> get_sb(log_blocks_per_seg));
> > +
> >  	return usable_segs;
> >  #endif
> >  	return get_sb(segment_count_main);
> > -- 
> > 2.43.0