Re: [PATCH] Bluetooth: btmtk: Remove resetting mt7921 before downloading the fw

From: Linux regression tracking (Thorsten Leemhuis)
Date: Mon Oct 14 2024 - 05:30:18 EST

Next message: Kent Gibson: "Re: [PATCH v2 5/6] gpiolib: switch the line state notifier to atomic"
Previous message: Andrei Simion: "[PATCH v2 RESEND] MAINTAINERS: Update maintainer list for MICROCHIP ASOC, SSC and MCP16502 drivers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 20.09.24 08:27, Chris Lu (陸稚泓) wrote:
> On Thu, 2024-09-19 at 23:25 +0100, marc.payne@xxxxxxxxxxxx wrote:
>>
>> External email : Please do not click links or open attachments until
>> you have verified the sender or the content.
>> Hi Chris and Luiz,
>>
>> What were your thoughts on the findings in my email dated 18th
>> September?
>
> Thanks for your suggestion.
>
> I've prepared the same environment (Kernel v6.11 + MT7921AUN dongle) to
> reproduce the issue, collected necessary logs locally and also
> initiated an internal discussion to clarify the root cause of this
> symptom. We'll review the changes between two firmware
> (20230526/20231109) if it's a bug or not.
>
> It may take some time to investigate. I'll let you know if there is any
> progress.

Just wondering: Chris Lu, and Marc, what's the status here? From here it
looks like there was no progress to fix this regression for a while, but
it's easy to miss something, that's why I ask.

Ciao, Thorsten

>> The 19/09/2024 03:26, Chris Lu (陸稚泓) wrote:
>>> Hi Luiz,
>>>
>>> On Wed, 2024-09-18 at 09:37 -0400, Luiz Augusto von Dentz wrote:
>>>>
>>>> External email : Please do not click links or open attachments
>> until
>>>> you have verified the sender or the content.
>>>> Hi Chris,
>>>>
>>>> On Tue, Sep 17, 2024 at 11:37 PM Chris Lu (陸稚泓) <
>>>> Chris.Lu@xxxxxxxxxxxx> wrote:
>>>>>
>>>>> On Tue, 2024-09-17 at 20:53 +0100, marc.payne@xxxxxxxxxxxx
>> wrote:
>>>>>
>>>>> Hi Marc,
>>>>>
>>>>> Thank you for providing the logs for us to debug.
>>>>>
>>>>>
>>>>> External email : Please do not click links or open attachments
>>>> until you have verified the sender or the content.
>>>>> The 12/09/2024 07:09, Chris Lu (陸稚泓) wrote:
>>>>>> On Tue, 2024-09-10 at 18:09 +0100, Marc Payne wrote:
>>>>>>
>>>>>> Hi Marc,
>>>>>
>>>>> Hi,
>>>>>
>>>>>>
>>>>>> Is it possible to provide entire kernel log for further
>>>> debugging?
>>>>>> (From boot up to issue heppen)
>>>>>>
>>>>>> We suspect that the issue occurred event earilier and our
>>>> controller is
>>>>>> not able to recover itself. Therfore, we need to check if
>>>> Bluetooth
>>>>>> works as expected in the booting stage.
>>>>>
>>>>> Happy to help. Below is the log for a cold boot of Linux 6.11-
>> rc7
>>>> (with
>>>>> the additional patch to avoid the controller reset before fw
>> load).
>>>> The
>>>>> MT7921AUN is directly connected to one of the computer's USB
>> ports.
>>>> The
>>>>>
>>>>>
>>>>> Is "MT7921AUN" an external Bluetooth/WiFi usb dongle?
>>>>> From the information in the kernel log you provided, the
>> MT7921AUN
>>>> IC used on
>>>>> the dongle is not for Linux PC project. Since the firmware we
>> push
>>>> to Kernel is not
>>>>> for "MT7921AUN", software, firmware and hardware may not match.
>>>> Using that
>>>>> dongle with Linux-Based Notebook may lead to some unexpected
>> errors
>>>> such as
>>>>> Bluetooth can't setup successfully.
>>>>
>>
>> If the AUN is really so different from other MT7921 variants, why has
>> MediaTek reused the VID:PID 0e8d:7961? Why is it even using the
>> MT7921 name
>> at all?
>>
>>>> Then something is not right with our code, either the driver
>> shall
>>>> not
>>>> be probed for such models or not attempt to load the wrong
>> firmware,
>>>> sounds like the patch tries to address the later but given your
>>>> explanation perhaps we should consider not even attempting to
>> probe
>>>> for such models?
>>>
>>> After internal investigation, that MT7921AUN connectivity dongle
>> was
>>> made by a module maker which MediaTek didn't participate in the
>>> development and verification. We only ensure the modules on
>> Notebook
>>> product can work normally. MT7921AUN has never been used in the
>>> Notebook product line. Acutally, the coredump is one of the
>> protection
>>> mechanism to make invalid module doesn't work on Notebook.
>>
>> The MT7921AU(N) is a USB3 connected WiFi 6E/BT IC. I agree, it won't
>> be
>> used in a Notebook, a PCIe WiFi (USB BT) version in a M.2 socket will
>> be
>> preferred, something like the MT7921K.
>>
>> MediaTek has released Windows drivers for the AU(N) variant and the
>> mt7921u driver has been added to Linux more than two years ago
>> specifically
>> to support USB-based variants of the MT7921 family of ICs, Tested-by
>> Sean Wang and Deren Wu from MediaTek. Clearly there is an intent to
>> support the use of these ICs on the PC platform, Notebook or
>> otherwise.
>>
>> I understand that MediaTek may have had issues with poor quality
>> implementations from third-party manufacturers that may have caused
>> the ICs to glitch in the past. I don't think that's what is happening
>> here because my device works perfectly with old BT firmware
>> and also works with latest firmware with the USB reset workaround
>> detailed in my previous email.
>>
>>>
>>> Currently, we only use PID/VID to control whether "probe" is
>> triggered
>>> or not. However, that module use MediaTek's common PID/VID which
>> is
>>> hard to be excluded. I agree with your opinion. We'll dicuss
>> another
>>> method to prevent unexpected module type from being recongized in
>>> driver layer in the near future.
>>
>> Please don't break/block working hardware on Linux! There is already
>> enough hardware that doesn't play nice with it, we really don't need
>> any more.
>>
>> To make a point, I have typed this email on a Bluetooth keyboard
>> paired with
>> the AWUS036AXML (MT7921AUN) running the latest firmware
>> 20240826151221.
>> I have used the workaround detailed in my email sent to Chris (CC'd
>> to
>> Luiz) on 18th September.
>>
>> This is working hardware, let's fix the bugs in the driver and the
>> firmware.
>>
>> Regards,
>>
>> Marc
>>
>>>
>>>>
>>>>> Do you have an M.2 MT7921 module? (Typically existed in the
>>>> Notebook product with
>>>>> MediaTek Connectivity solution). The M.2 module is the correct
>> one
>>>> expected to be used.
>>>>> I've setup an environment locally with Kernel v6.11, With Hao
>> Qin's
>>>> solustion
>>>>> ("[PATCH] Bluetooth: btmtk: Remove resetting mt7921 before
>>>> downloading the fw"),
>>>>> I'm albe to successfully setup Bluetooth and works normally.
>>>>
>>>> Shall I consider this a Tested-by?
>>>
>>> Yes, I've verified with this change. MT7921e/MT7922e/MT7925e M.2
>> (all
>>> of their Bluetooth use USB interface) are able to setup and work
>>> normally.
>>>
>>> BRs,
>>> Chris
>>>
>>>>
>>>>> BRs,
>>>>> Chris
>>>>>
>>>>> system has an Intel AX211 fitted so I have disabled it's
>> bluetooth
>>>>> functionality in the UEFI setup.
>>>>>
>>>>> Hope this helps.
>>>>>
>>>>>>
>>>>>> BRs,
>>>>>> Chris Lu
>>>>>
>>>>> Regards,
>>>>>
>>>>> Marc
>>>>>
>>>>>
>>>>> [ 0.000000] Linux version 6.11.0-rc7-00001-g0e2ad6528188-
>> dirty (
>>>> marcp@mdp-archnuc) (gcc (GCC) 14.2.1 20240805, GNU ld (GNU
>> Binutils)
>>>> 2.43.0) #71 SMP PREEMPT_DYNAMIC Mon Sep 9 23:22:56 BST 2024
>>>>> [ 0.000000] Command line: root=UUID=0420afc7-4947-4e2e-a096-
>>>> b607b8b7fd93 rw quiet initrd=boot\intel-ucode.img
>>>> initrd=boot\initramfs-linux611.img resume=UUID=0420afc7-4947-
>> 4e2e-
>>>> a096-b607b8b7fd93 resume_offset=106496
>>>>> [ 0.000000] x86/split lock detection: #AC: crashing the
>> kernel
>>>> on kernel split_locks and warning on user-space split_locks
>>>>> [ 0.000000] BIOS-provided physical RAM map:
>>>>> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-
>>>> 0x000000000009dfff] usable
>>>>> [ 0.000000] BIOS-e820: [mem 0x000000000009e000-
>>>> 0x000000000009efff] reserved
>>>>> [ 0.000000] BIOS-e820: [mem 0x000000000009f000-
>>>> 0x000000000009ffff] usable
>>>>> [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-
>>>> 0x00000000000fffff] reserved
>>>>> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-
>>>> 0x000000004dd45fff] usable
>>>>> [ 0.000000] BIOS-e820: [mem 0x000000004dd46000-
>>>> 0x0000000056c70fff] reserved
>>>>> [ 0.000000] BIOS-e820: [mem 0x0000000056c71000-
>>>> 0x0000000056d48fff] ACPI data
>>>>> [ 0.000000] BIOS-e820: [mem 0x0000000056d49000-
>>>> 0x0000000056ecefff] ACPI NVS
>>>>> [ 0.000000] BIOS-e820: [mem 0x0000000056ecf000-
>>>> 0x000000005a7fefff] reserved
>>>>> [ 0.000000] BIOS-e820: [mem 0x000000005a7ff000-
>>>> 0x000000005a7fffff] usable
>>>>> [ 0.000000] BIOS-e820: [mem 0x000000005a800000-
>>>> 0x00000000611fffff] reserved
>>>>> [ 0.000000] BIOS-e820: [mem 0x0000000061e00000-
>>>> 0x00000000687fffff] reserved
>>>>> [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-
>>>> 0x00000000cfffffff] reserved
>>>>> [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-
>>>> 0x00000000fe010fff] reserved
>>>>> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-
>>>> 0x00000000fec00fff] reserved
>>>>> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-
>>>> 0x00000000fed00fff] reserved
>>>>> [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-
>>>> 0x00000000fed7ffff] reserved
>>>>> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-
>>>> 0x00000000fee00fff] reserved
>>>>> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-
>>>> 0x00000000ffffffff] reserved
>>>>> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-
>>>> 0x00000010977fffff] usable
>>>>> [ 0.000000] NX (Execute Disable) protection: active
>>>>> [ 0.000000] APIC: Static calls initialized
>>>>> [ 0.000000] efi: EFI v2.8 by American Megatrends
>>>>> [ 0.000000] efi: ACPI=0x56e48000 ACPI 2.0=0x56e48014
>>>> TPMFinalLog=0x56db4000 SMBIOS=0x5a483000 SMBIOS 3.0=0x5a482000
>>>> MEMATTR=0x4485d118 ESRT=0x43ea7e98 INITRD=0x41e12e98
>> RNG=0x56c9b018
>>>> TPMEventLog=0x41dd5018
>>>>> [ 0.000000] random: crng init done
>>>>> [ 0.000000] efi: Remove mem115: MMIO range=[0xc0000000-
>>>> 0xcfffffff] (256MB) from e820 map
>>>>> [ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff]
>> reserved
>>>>> [ 0.000000] efi: Not removing mem116: MMIO
>> range=[0xfe000000-
>>>> 0xfe010fff] (68KB) from e820 map
>>>>> [ 0.000000] efi: Not removing mem117: MMIO
>> range=[0xfec00000-
>>>> 0xfec00fff] (4KB) from e820 map
>>>>> [ 0.000000] efi: Not removing mem118: MMIO
>> range=[0xfed00000-
>>>> 0xfed00fff] (4KB) from e820 map
>>>>> [ 0.000000] efi: Not removing mem120: MMIO
>> range=[0xfee00000-
>>>> 0xfee00fff] (4KB) from e820 map
>>>>> [ 0.000000] efi: Remove mem121: MMIO range=[0xff000000-
>>>> 0xffffffff] (16MB) from e820 map
>>>>> [ 0.000000] e820: remove [mem 0xff000000-0xffffffff]
>> reserved
>>>>> [ 0.000000] SMBIOS 3.5.0 present.
>>>>> [ 0.000000] DMI: Intel(R) Client Systems
>> NUC12WSHi7/NUC12WSBi7,
>>>> BIOS WSADL357.0088.2023.0505.1623 05/05/2023
>>>>> [ 0.000000] DMI: Memory slots populated: 2/2
>>>>> [ 0.000000] tsc: Detected 2500.000 MHz processor
>>>>> [ 0.000000] tsc: Detected 2496.000 MHz TSC
>>>>> [ 0.000549] e820: update [mem 0x00000000-0x00000fff] usable
>> ==>
>>>> reserved
>>>>> [ 0.000550] e820: remove [mem 0x000a0000-0x000fffff] usable
>>>>> [ 0.000555] last_pfn = 0x1097800 max_arch_pfn = 0x400000000
>>>>> [ 0.000558] MTRR map: 5 entries (3 fixed + 2 variable; max
>> 23),
>>>> built from 10 variable MTRRs
>>>>> [ 0.000559] x86/PAT: Configuration [0-7]: WB WC UC-
>>>> UC WB WP UC- WT
>>>>> [ 0.000935] last_pfn = 0x5a800 max_arch_pfn = 0x400000000
>>>>> [ 0.014044] esrt: Reserving ESRT space from
>> 0x0000000043ea7e98
>>>> to 0x0000000043ea7f98.
>>>>> [ 0.014049] e820: update [mem 0x43ea7000-0x43ea7fff] usable
>> ==>
>>>> reserved
>>>>> [ 0.014062] Using GB pages for direct mapping
>>>>> [ 0.014063] Incomplete global flushes, disabling PCID
>>>>> [ 0.014285] Secure boot disabled
>>>>> [ 0.014285] RAMDISK: [mem 0x39be8000-0x4039cfff]
>>>>> [ 0.014312] ACPI: Early table checksum verification disabled
>>>>> [ 0.014315] ACPI: RSDP 0x0000000056E48014 000024 (v02 INTEL
>> )
>>>>> [ 0.014318] ACPI: XSDT 0x0000000056DE4728 000114 (v01
>>>> INTEL NUCxi7A5 00000058 AMI 01000013)
>>>>> [ 0.014322] ACPI: FACP 0x0000000056D46000 000114 (v06
>>>> INTEL NUCxi7A5 00000058 AMI 01000013)
>>>>> [ 0.014326] ACPI: DSDT 0x0000000056CD9000 06CECF (v02
>>>> INTEL NUCxi7A5 00000058 INTL 20200717)
>>>>> [ 0.014328] ACPI: FACS 0x0000000056ECC000 000040
>>>>> [ 0.014329] ACPI: FIDT 0x0000000056CD8000 00009C (v01
>>>> INTEL NUCxi7A5 00000058 AMI 00010013)
>>>>> [ 0.014331] ACPI: SSDT 0x0000000056D48000 00038C (v02
>>>> INTEL NUCxi7A5 00000058 INTL 20200717)
>>>>> [ 0.014333] ACPI: SSDT 0x0000000056CD2000 005D2C (v02
>>>> INTEL NUCxi7A5 00000058 INTL 20200717)
>>>>> [ 0.014335] ACPI: SSDT 0x0000000056CCF000 002AA1 (v02
>>>> INTEL NUCxi7A5 00000058 INTL 20200717)
>>>>> [ 0.014337] ACPI: SSDT 0x0000000056CCB000 0033D3 (v02
>>>> INTEL NUCxi7A5 00000058 INTL 20200717)
>>>>> [ 0.014339] ACPI: SSDT 0x0000000056CBD000 00D39F (v02
>>>> INTEL NUCxi7A5 00001000 INTL 20200717)
>>>>> [ 0.014341] ACPI: HPET 0x0000000056D47000 000038 (v01
>>>> INTEL NUCxi7A5 00000058 AMI 01000013)
>>>>> [ 0.014343] ACPI: APIC 0x0000000056CBC000 0001DC (v05
>>>> INTEL NUCxi7A5 00000058 AMI 01000013)
>>>>> [ 0.014344] ACPI: MCFG 0x0000000056CBB000 00003C (v01
>>>> INTEL NUCxi7A5 00000058 AMI 01000013)
>>>>> [ 0.014346] ACPI: SSDT 0x0000000056CB9000 001F04 (v02
>>>> INTEL NUCxi7A5 00000058 INTL 20200717)
>>>>> [ 0.014348] ACPI: SSDT 0x0000000056CB7000 001DFD (v02
>>>> INTEL NUCxi7A5 00000058 INTL 20200717)
>>>>> [ 0.014350] ACPI: UEFI 0x0000000056D9B000 000048 (v01
>>>> INTEL NUCxi7A5 00000058 AMI 01000013)
>>>>> [ 0.014352] ACPI: NHLT 0x0000000056CB6000 0002F1 (v00
>>>> INTEL NUCxi7A5 00000058 AMI 01000013)
>>>>> [ 0.014353] ACPI: LPIT 0x0000000056CB5000 0000CC (v01
>>>> INTEL NUCxi7A5 00000058 AMI 01000013)
>>>>> [ 0.014355] ACPI: WDAT 0x0000000056CB3000 000134 (v01
>>>> INTEL NUCxi7A5 00000058 AMI 01000013)
>>>>> [ 0.014357] ACPI: SSDT 0x0000000056CB0000 002A83 (v02
>>>> INTEL NUCxi7A5 00000058 INTL 20200717)
>>>>> [ 0.014359] ACPI: SSDT 0x0000000056CAD000 002357 (v02
>>>> INTEL NUCxi7A5 00000058 INTL 20200717)
>>>>> [ 0.014361] ACPI: DBGP 0x0000000056CAC000 000034 (v01
>>>> INTEL NUCxi7A5 00000058 AMI 01000013)
>>>>> [ 0.014363] ACPI: DBG2 0x0000000056CAB000 000054 (v00
>>>> INTEL NUCxi7A5 00000058 AMI 01000013)
>>>>> [ 0.014364] ACPI: DMAR 0x0000000056CAA000 000088 (v02
>>>> INTEL NUCxi7A5 00000058 01000013)
>>>>> [ 0.014366] ACPI: FPDT 0x0000000056CA9000 000044 (v01
>>>> INTEL NUCxi7A5 00000058 AMI 01000013)
>>>>> [ 0.014368] ACPI: SSDT 0x0000000056CA8000 000D56 (v02
>>>> INTEL NUCxi7A5 00000058 INTL 20200717)
>>>>> [ 0.014370] ACPI: SSDT 0x0000000056CA4000 003AEA (v02
>>>> INTEL NUCxi7A5 00000058 INTL 20200717)
>>>>> [ 0.014372] ACPI: SSDT 0x0000000056CA0000 0035A2 (v02
>>>> INTEL NUCxi7A5 00000058 INTL 20200717)
>>>>> [ 0.014374] ACPI: SSDT 0x0000000056C9F000 000144 (v02
>>>> INTEL NUCxi7A5 00000058 INTL 20200717)
>>>>> [ 0.014376] ACPI: BGRT 0x0000000056C9E000 000038 (v01
>>>> INTEL NUCxi7A5 00000058 AMI 00010013)
>>>>> [ 0.014377] ACPI: TPM2 0x0000000056C9D000 00004C (v04
>>>> INTEL NUCxi7A5 00000058 AMI 00000000)
>>>>> [ 0.014379] ACPI: PHAT 0x0000000056C9C000 00062D (v01
>>>> INTEL NUCxi7A5 00000058 MSFT 0100000D)
>>>>> [ 0.014381] ACPI: WSMT 0x0000000056CB4000 000028 (v01
>>>> INTEL NUCxi7A5 00000058 AMI 00010013)
>>>>> [ 0.014383] ACPI: Reserving FACP table memory at [mem
>>>> 0x56d46000-0x56d46113]
>>>>> [ 0.014384] ACPI: Reserving DSDT table memory at [mem
>>>> 0x56cd9000-0x56d45ece]
>>>>> [ 0.014384] ACPI: Reserving FACS table memory at [mem
>>>> 0x56ecc000-0x56ecc03f]
>>>>> [ 0.014385] ACPI: Reserving FIDT table memory at [mem
>>>> 0x56cd8000-0x56cd809b]
>>>>> [ 0.014386] ACPI: Reserving SSDT table memory at [mem
>>>> 0x56d48000-0x56d4838b]
>>>>> [ 0.014386] ACPI: Reserving SSDT table memory at [mem
>>>> 0x56cd2000-0x56cd7d2b]
>>>>> [ 0.014387] ACPI: Reserving SSDT table memory at [mem
>>>> 0x56ccf000-0x56cd1aa0]
>>>>> [ 0.014387] ACPI: Reserving SSDT table memory at [mem
>>>> 0x56ccb000-0x56cce3d2]
>>>>> [ 0.014388] ACPI: Reserving SSDT table memory at [mem
>>>> 0x56cbd000-0x56cca39e]
>>>>> [ 0.014388] ACPI: Reserving HPET table memory at [mem
>>>> 0x56d47000-0x56d47037]
>>>>> [ 0.014389] ACPI: Reserving APIC table memory at [mem
>>>> 0x56cbc000-0x56cbc1db]
>>>>> [ 0.014389] ACPI: Reserving MCFG table memory at [mem
>>>> 0x56cbb000-0x56cbb03b]
>>>>> [ 0.014390] ACPI: Reserving SSDT table memory at [mem
>>>> 0x56cb9000-0x56cbaf03]
>>>>> [ 0.014390] ACPI: Reserving SSDT table memory at [mem
>>>> 0x56cb7000-0x56cb8dfc]
>>>>> [ 0.014391] ACPI: Reserving UEFI table memory at [mem
>>>> 0x56d9b000-0x56d9b047]
>>>>> [ 0.014391] ACPI: Reserving NHLT table memory at [mem
>>>> 0x56cb6000-0x56cb62f0]
>>>>> [ 0.014392] ACPI: Reserving LPIT table memory at [mem
>>>> 0x56cb5000-0x56cb50cb]
>>>>> [ 0.014392] ACPI: Reserving WDAT table memory at [mem
>>>> 0x56cb3000-0x56cb3133]
>>>>> [ 0.014393] ACPI: Reserving SSDT table memory at [mem
>>>> 0x56cb0000-0x56cb2a82]
>>>>> [ 0.014393] ACPI: Reserving SSDT table memory at [mem
>>>> 0x56cad000-0x56caf356]
>>>>> [ 0.014394] ACPI: Reserving DBGP table memory at [mem
>>>> 0x56cac000-0x56cac033]
>>>>> [ 0.014394] ACPI: Reserving DBG2 table memory at [mem
>>>> 0x56cab000-0x56cab053]
>>>>> [ 0.014395] ACPI: Reserving DMAR table memory at [mem
>>>> 0x56caa000-0x56caa087]
>>>>> [ 0.014395] ACPI: Reserving FPDT table memory at [mem
>>>> 0x56ca9000-0x56ca9043]
>>>>> [ 0.014396] ACPI: Reserving SSDT table memory at [mem
>>>> 0x56ca8000-0x56ca8d55]
>>>>> [ 0.014396] ACPI: Reserving SSDT table memory at [mem
>>>> 0x56ca4000-0x56ca7ae9]
>>>>> [ 0.014397] ACPI: Reserving SSDT table memory at [mem
>>>> 0x56ca0000-0x56ca35a1]
>>>>> [ 0.014397] ACPI: Reserving SSDT table memory at [mem
>>>> 0x56c9f000-0x56c9f143]
>>>>> [ 0.014398] ACPI: Reserving BGRT table memory at [mem
>>>> 0x56c9e000-0x56c9e037]
>>>>> [ 0.014398] ACPI: Reserving TPM2 table memory at [mem
>>>> 0x56c9d000-0x56c9d04b]
>>>>> [ 0.014399] ACPI: Reserving PHAT table memory at [mem
>>>> 0x56c9c000-0x56c9c62c]
>>>>> [ 0.014400] ACPI: Reserving WSMT table memory at [mem
>>>> 0x56cb4000-0x56cb4027]
>>>>> [ 0.014743] No NUMA configuration found
>>>>> [ 0.014744] Faking a node at [mem 0x0000000000000000-
>>>> 0x00000010977fffff]
>>>>> [ 0.014746] NODE_DATA(0) allocated [mem 0x10977fb000-
>>>> 0x10977fffff]
>>>>> [ 0.014795] Zone ranges:
>>>>> [ 0.014796] DMA [mem 0x0000000000001000-
>>>> 0x0000000000ffffff]
>>>>> [ 0.014797] DMA32 [mem 0x0000000001000000-
>>>> 0x00000000ffffffff]
>>>>> [ 0.014798] Normal [mem 0x0000000100000000-
>>>> 0x00000010977fffff]
>>>>> [ 0.014799] Device empty
>>>>> [ 0.014799] Movable zone start for each node
>>>>> [ 0.014800] Early memory node ranges
>>>>> [ 0.014800] node 0: [mem 0x0000000000001000-
>>>> 0x000000000009dfff]
>>>>> [ 0.014801] node 0: [mem 0x000000000009f000-
>>>> 0x000000000009ffff]
>>>>> [ 0.014801] node 0: [mem 0x0000000000100000-
>>>> 0x000000004dd45fff]
>>>>> [ 0.014802] node 0: [mem 0x000000005a7ff000-
>>>> 0x000000005a7fffff]
>>>>> [ 0.014802] node 0: [mem 0x0000000100000000-
>>>> 0x00000010977fffff]
>>>>> [ 0.014805] Initmem setup node 0 [mem 0x0000000000001000-
>>>> 0x00000010977fffff]
>>>>> [ 0.014808] On node 0, zone DMA: 1 pages in unavailable
>> ranges
>>>>> [ 0.014809] On node 0, zone DMA: 1 pages in unavailable
>> ranges
>>>>> [ 0.014821] On node 0, zone DMA: 96 pages in unavailable
>> ranges
>>>>> [ 0.015998] On node 0, zone DMA32: 19129 pages in
>> unavailable
>>>> ranges
>>>>> [ 0.078525] On node 0, zone Normal: 22528 pages in
>> unavailable
>>>> ranges
>>>>> [ 0.078536] On node 0, zone Normal: 2048 pages in
>> unavailable
>>>> ranges
>>>>> [ 0.078567] Reserving Intel graphics memory at [mem
>> 0x64800000-
>>>> 0x687fffff]
>>>>> [ 0.080194] ACPI: PM-Timer IO Port: 0x1808
>>>>> [ 0.080199] ACPI: LAPIC_NMI (acpi_id[0x01] high edge
>> lint[0x1])
>>>>> [ 0.080200] ACPI: LAPIC_NMI (acpi_id[0x02] high edge
>> lint[0x1])
>>>>> [ 0.080200] ACPI: LAPIC_NMI (acpi_id[0x03] high edge
>> lint[0x1])
>>>>> [ 0.080201] ACPI: LAPIC_NMI (acpi_id[0x04] high edge
>> lint[0x1])
>>>>> [ 0.080201] ACPI: LAPIC_NMI (acpi_id[0x05] high edge
>> lint[0x1])
>>>>> [ 0.080201] ACPI: LAPIC_NMI (acpi_id[0x06] high edge
>> lint[0x1])
>>>>> [ 0.080202] ACPI: LAPIC_NMI (acpi_id[0x07] high edge
>> lint[0x1])
>>>>> [ 0.080202] ACPI: LAPIC_NMI (acpi_id[0x08] high edge
>> lint[0x1])
>>>>> [ 0.080203] ACPI: LAPIC_NMI (acpi_id[0x09] high edge
>> lint[0x1])
>>>>> [ 0.080203] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge
>> lint[0x1])
>>>>> [ 0.080203] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge
>> lint[0x1])
>>>>> [ 0.080204] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge
>> lint[0x1])
>>>>> [ 0.080204] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge
>> lint[0x1])
>>>>> [ 0.080205] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge
>> lint[0x1])
>>>>> [ 0.080205] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge
>> lint[0x1])
>>>>> [ 0.080205] ACPI: LAPIC_NMI (acpi_id[0x10] high edge
>> lint[0x1])
>>>>> [ 0.080206] ACPI: LAPIC_NMI (acpi_id[0x11] high edge
>> lint[0x1])
>>>>> [ 0.080206] ACPI: LAPIC_NMI (acpi_id[0x12] high edge
>> lint[0x1])
>>>>> [ 0.080207] ACPI: LAPIC_NMI (acpi_id[0x13] high edge
>> lint[0x1])
>>>>> [ 0.080207] ACPI: LAPIC_NMI (acpi_id[0x14] high edge
>> lint[0x1])
>>>>> [ 0.080207] ACPI: LAPIC_NMI (acpi_id[0x15] high edge
>> lint[0x1])
>>>>> [ 0.080208] ACPI: LAPIC_NMI (acpi_id[0x16] high edge
>> lint[0x1])
>>>>> [ 0.080208] ACPI: LAPIC_NMI (acpi_id[0x17] high edge
>> lint[0x1])
>>>>> [ 0.080209] ACPI: LAPIC_NMI (acpi_id[0x00] high edge
>> lint[0x1])
>>>>> [ 0.080291] IOAPIC[0]: apic_id 2, version 32, address
>>>> 0xfec00000, GSI 0-119
>>>>> [ 0.080293] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2
>> dfl
>>>> dfl)
>>>>> [ 0.080294] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
>> high
>>>> level)
>>>>> [ 0.080296] ACPI: Using ACPI (MADT) for SMP configuration
>>>> information
>>>>> [ 0.080297] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>>>>> [ 0.080302] e820: update [mem 0x444e6000-0x44584fff] usable
>> ==>
>>>> reserved
>>>>> [ 0.080309] TSC deadline timer available
>>>>> [ 0.080311] CPU topo: Max. logical packages: 1
>>>>> [ 0.080311] CPU topo: Max. logical dies: 1
>>>>> [ 0.080312] CPU topo: Max. dies per package: 1
>>>>> [ 0.080313] CPU topo: Max. threads per core: 2
>>>>> [ 0.080314] CPU topo: Num. cores per package: 12
>>>>> [ 0.080314] CPU topo: Num. threads per package: 16
>>>>> [ 0.080314] CPU topo: Allowing 16 present CPUs plus 0
>> hotplug
>>>> CPUs
>>>>> [ 0.080325] PM: hibernation: Registered nosave memory: [mem
>>>> 0x00000000-0x00000fff]
>>>>> [ 0.080326] PM: hibernation: Registered nosave memory: [mem
>>>> 0x0009e000-0x0009efff]
>>>>> [ 0.080327] PM: hibernation: Registered nosave memory: [mem
>>>> 0x000a0000-0x000fffff]
>>>>> [ 0.080328] PM: hibernation: Registered nosave memory: [mem
>>>> 0x43ea7000-0x43ea7fff]
>>>>> [ 0.080329] PM: hibernation: Registered nosave memory: [mem
>>>> 0x444e6000-0x44584fff]
>>>>> [ 0.080330] PM: hibernation: Registered nosave memory: [mem
>>>> 0x4dd46000-0x56c70fff]
>>>>> [ 0.080330] PM: hibernation: Registered nosave memory: [mem
>>>> 0x56c71000-0x56d48fff]
>>>>> [ 0.080331] PM: hibernation: Registered nosave memory: [mem
>>>> 0x56d49000-0x56ecefff]
>>>>> [ 0.080331] PM: hibernation: Registered nosave memory: [mem
>>>> 0x56ecf000-0x5a7fefff]
>>>>> [ 0.080332] PM: hibernation: Registered nosave memory: [mem
>>>> 0x5a800000-0x611fffff]
>>>>> [ 0.080332] PM: hibernation: Registered nosave memory: [mem
>>>> 0x61200000-0x61dfffff]
>>>>> [ 0.080333] PM: hibernation: Registered nosave memory: [mem
>>>> 0x61e00000-0x687fffff]
>>>>> [ 0.080333] PM: hibernation: Registered nosave memory: [mem
>>>> 0x68800000-0xfdffffff]
>>>>> [ 0.080333] PM: hibernation: Registered nosave memory: [mem
>>>> 0xfe000000-0xfe010fff]
>>>>> [ 0.080334] PM: hibernation: Registered nosave memory: [mem
>>>> 0xfe011000-0xfebfffff]
>>>>> [ 0.080334] PM: hibernation: Registered nosave memory: [mem
>>>> 0xfec00000-0xfec00fff]
>>>>> [ 0.080334] PM: hibernation: Registered nosave memory: [mem
>>>> 0xfec01000-0xfecfffff]
>>>>> [ 0.080335] PM: hibernation: Registered nosave memory: [mem
>>>> 0xfed00000-0xfed00fff]
>>>>> [ 0.080335] PM: hibernation: Registered nosave memory: [mem
>>>> 0xfed01000-0xfed1ffff]
>>>>> [ 0.080336] PM: hibernation: Registered nosave memory: [mem
>>>> 0xfed20000-0xfed7ffff]
>>>>> [ 0.080336] PM: hibernation: Registered nosave memory: [mem
>>>> 0xfed80000-0xfedfffff]
>>>>> [ 0.080336] PM: hibernation: Registered nosave memory: [mem
>>>> 0xfee00000-0xfee00fff]
>>>>> [ 0.080337] PM: hibernation: Registered nosave memory: [mem
>>>> 0xfee01000-0xffffffff]
>>>>> [ 0.080338] [mem 0x68800000-0xfdffffff] available for PCI
>>>> devices
>>>>> [ 0.080339] Booting paravirtualized kernel on bare hardware
>>>>> [ 0.080340] clocksource: refined-jiffies: mask: 0xffffffff
>>>> max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
>>>>> [ 0.084163] setup_percpu: NR_CPUS:320 nr_cpumask_bits:16
>>>> nr_cpu_ids:16 nr_node_ids:1
>>>>> [ 0.084800] percpu: Embedded 66 pages/cpu s233472 r8192
>> d28672
>>>> u524288
>>>>> [ 0.084804] pcpu-alloc: s233472 r8192 d28672 u524288
>>>> alloc=1*2097152
>>>>> [ 0.084806] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
>>>>> [ 0.084809] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
>>>>> [ 0.084820] Kernel command line: root=UUID=0420afc7-4947-
>> 4e2e-
>>>> a096-b607b8b7fd93 rw quiet initrd=boot\intel-ucode.img
>>>> initrd=boot\initramfs-linux611.img resume=UUID=0420afc7-4947-
>> 4e2e-
>>>> a096-b607b8b7fd93 resume_offset=106496
>>>>> [ 0.088825] Dentry cache hash table entries: 8388608 (order:
>> 14,
>>>> 67108864 bytes, linear)
>>>>> [ 0.090830] Inode-cache hash table entries: 4194304 (order:
>> 13,
>>>> 33554432 bytes, linear)
>>>>> [ 0.090938] Fallback order for Node 0: 0
>>>>> [ 0.090940] Built 1 zonelists, mobility grouping on. Total
>>>> pages: 16667877
>>>>> [ 0.090941] Policy zone: Normal
>>>>> [ 0.091110] mem auto-init: stack:all(zero), heap alloc:on,
>> heap
>>>> free:off
>>>>> [ 0.091117] software IO TLB: area num 16.
>>>>> [ 0.174200] SLUB: HWalign=64, Order=0-3, MinObjects=0,
>> CPUs=16,
>>>> Nodes=1
>>>>> [ 0.174233] ftrace: allocating 50629 entries in 198 pages
>>>>> [ 0.178623] ftrace: allocated 198 pages with 4 groups
>>>>> [ 0.178673] Dynamic Preempt: full
>>>>> [ 0.178715] rcu: Preemptible hierarchical RCU
>> implementation.
>>>>> [ 0.178716] rcu: RCU restricting CPUs from NR_CPUS=320 to
>>>> nr_cpu_ids=16.
>>>>> [ 0.178716] rcu: RCU priority boosting: priority 1 delay 500
>> ms.
>>>>> [ 0.178717] Trampoline variant of Tasks RCU enabled.
>>>>> [ 0.178718] Rude variant of Tasks RCU enabled.
>>>>> [ 0.178718] Tracing variant of Tasks RCU enabled.
>>>>> [ 0.178718] rcu: RCU calculated value of scheduler-
>> enlistment
>>>> delay is 30 jiffies.
>>>>> [ 0.178719] rcu: Adjusting geometry for rcu_fanout_leaf=16,
>>>> nr_cpu_ids=16
>>>>> [ 0.178727] RCU Tasks: Setting shift to 4 and lim to 1
>>>> rcu_task_cb_adjust=1.
>>>>> [ 0.178728] RCU Tasks Rude: Setting shift to 4 and lim to 1
>>>> rcu_task_cb_adjust=1.
>>>>> [ 0.178729] RCU Tasks Trace: Setting shift to 4 and lim to 1
>>>> rcu_task_cb_adjust=1.
>>>>> [ 0.181066] NR_IRQS: 20736, nr_irqs: 2184, preallocated
>> irqs: 16
>>>>> [ 0.181413] rcu: srcu_init: Setting srcu_struct sizes based
>> on
>>>> contention.
>>>>> [ 0.181851] kfence: initialized - using 2097152 bytes for
>> 255
>>>> objects at 0x(____ptrval____)-0x(____ptrval____)
>>>>> [ 0.181876] Console: colour dummy device 80x25
>>>>> [ 0.181878] printk: legacy console [tty0] enabled
>>>>> [ 0.181906] ACPI: Core revision 20240322
>>>>> [ 0.182096] hpet: HPET dysfunctional in PC10. Force
>> disabled.
>>>>> [ 0.182097] APIC: Switch to symmetric I/O mode setup
>>>>> [ 0.182099] DMAR: Host address width 39
>>>>> [ 0.182099] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
>>>>> [ 0.182103] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap
>>>> 1c0000c40660462 ecap 29a00f0505e
>>>>> [ 0.182104] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
>>>>> [ 0.182107] DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap
>>>> d2008c40660462 ecap f050da
>>>>> [ 0.182109] DMAR: RMRR base: 0x00000064000000 end:
>>>> 0x000000687fffff
>>>>> [ 0.182111] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000
>>>> IOMMU 1
>>>>> [ 0.182112] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
>>>>> [ 0.182112] DMAR-IR: Queued invalidation will be enabled to
>>>> support x2apic and Intr-remapping.
>>>>> [ 0.186032] DMAR-IR: Enabled IRQ remapping in x2apic mode
>>>>> [ 0.186034] x2apic enabled
>>>>> [ 0.186100] APIC: Switched APIC routing to: cluster x2apic
>>>>> [ 0.197380] clocksource: tsc-early: mask: 0xffffffffffffffff
>>>> max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns
>>>>> [ 0.197384] Calibrating delay loop (skipped), value
>> calculated
>>>> using timer frequency.. 4993.00 BogoMIPS (lpj=8320000)
>>>>> [ 0.197430] CPU0: Thermal monitoring enabled (TM1)
>>>>> [ 0.197431] x86/cpu: User Mode Instruction Prevention (UMIP)
>>>> activated
>>>>> [ 0.197530] CET detected: Indirect Branch Tracking enabled
>>>>> [ 0.197532] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
>>>>> [ 0.197532] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0,
>> 1GB 0
>>>>> [ 0.197534] process: using mwait in idle threads
>>>>> [ 0.197536] Spectre V1 : Mitigation: usercopy/swapgs
>> barriers
>>>> and __user pointer sanitization
>>>>> [ 0.197537] Spectre V2 : Mitigation: Enhanced / Automatic
>> IBRS
>>>>> [ 0.197538] Spectre V2 : Spectre v2 / SpectreRSB mitigation:
>>>> Filling RSB on context switch
>>>>> [ 0.197538] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a
>>>> single CALL on VMEXIT
>>>>> [ 0.197539] Spectre V2 : mitigation: Enabling conditional
>>>> Indirect Branch Prediction Barrier
>>>>> [ 0.197540] Speculative Store Bypass: Mitigation:
>> Speculative
>>>> Store Bypass disabled via prctl
>>>>> [ 0.197541] Register File Data Sampling: Mitigation: Clear
>>>> Register File
>>>>> [ 0.197547] x86/fpu: Supporting XSAVE feature 0x001: 'x87
>>>> floating point registers'
>>>>> [ 0.197548] x86/fpu: Supporting XSAVE feature 0x002: 'SSE
>>>> registers'
>>>>> [ 0.197548] x86/fpu: Supporting XSAVE feature 0x004: 'AVX
>>>> registers'
>>>>> [ 0.197549] x86/fpu: Supporting XSAVE feature 0x200:
>> 'Protection
>>>> Keys User registers'
>>>>> [ 0.197549] x86/fpu: Supporting XSAVE feature 0x800:
>> 'Control-
>>>> flow User registers'
>>>>> [ 0.197550] x86/fpu: xstate_offset[2]: 576,
>>>> xstate_sizes[2]: 256
>>>>> [ 0.197551] x86/fpu: xstate_offset[9]: 832,
>>>> xstate_sizes[9]: 8
>>>>> [ 0.197551] x86/fpu: xstate_offset[11]: 840,
>>>> xstate_sizes[11]: 16
>>>>> [ 0.197552] x86/fpu: Enabled xstate features 0xa07, context
>> size
>>>> is 856 bytes, using 'compacted' format.
>>>>> [ 0.200716] Freeing SMP alternatives memory: 40K
>>>>> [ 0.200716] pid_max: default: 32768 minimum: 301
>>>>> [ 0.200716] LSM: initializing
>>>> lsm=capability,landlock,lockdown,yama,bpf
>>>>> [ 0.200716] landlock: Up and running.
>>>>> [ 0.200716] Yama: becoming mindful.
>>>>> [ 0.200716] LSM support for eBPF active
>>>>> [ 0.200716] Mount-cache hash table entries: 131072 (order:
>> 8,
>>>> 1048576 bytes, linear)
>>>>> [ 0.200716] Mountpoint-cache hash table entries: 131072
>> (order:
>>>> 8, 1048576 bytes, linear)
>>>>> [ 0.200716] smpboot: CPU0: 12th Gen Intel(R) Core(TM) i7-
>> 1260P
>>>> (family: 0x6, model: 0x9a, stepping: 0x3)
>>>>> [ 0.200716] Performance Events: XSAVE Architectural LBR,
>> PEBS
>>>> fmt4+-baseline, AnyThread deprecated, Alderlake Hybrid events,
>> 32-
>>>> deep LBR, full-width counters, Intel PMU driver.
>>>>> [ 0.200716] core: cpu_core PMU driver:
>>>>> [ 0.200716] ... version: 5
>>>>> [ 0.200716] ... bit width: 48
>>>>> [ 0.200716] ... generic registers: 8
>>>>> [ 0.200716] ... value mask: 0000ffffffffffff
>>>>> [ 0.200716] ... max period: 00007fffffffffff
>>>>> [ 0.200716] ... fixed-purpose events: 4
>>>>> [ 0.200716] ... event mask: 0001000f000000ff
>>>>> [ 0.200716] signal: max sigframe size: 3632
>>>>> [ 0.200716] Estimated ratio of average max frequency by base
>>>> frequency (times 1024): 1556
>>>>> [ 0.200716] rcu: Hierarchical SRCU implementation.
>>>>> [ 0.200716] rcu: Max phase no-delay instances is 1000.
>>>>> [ 0.200716] Timer migration: 2 hierarchy levels; 8 children
>> per
>>>> group; 2 crossnode level
>>>>> [ 0.200716] NMI watchdog: Enabled. Permanently consumes one
>> hw-
>>>> PMU counter.
>>>>> [ 0.200716] smp: Bringing up secondary CPUs ...
>>>>> [ 0.200716] smpboot: x86: Booting SMP configuration:
>>>>> [ 0.200716] .... node #0, CPUs: #2 #4 #6 #8 #9
>> #10
>>>> #11 #12 #13 #14 #15
>>>>> [ 0.018930] core: cpu_atom PMU driver: PEBS-via-PT
>>>>> [ 0.018930] ... version: 5
>>>>> [ 0.018930] ... bit width: 48
>>>>> [ 0.018930] ... generic registers: 6
>>>>> [ 0.018930] ... value mask: 0000ffffffffffff
>>>>> [ 0.018930] ... max period: 00007fffffffffff
>>>>> [ 0.018930] ... fixed-purpose events: 3
>>>>> [ 0.018930] ... event mask: 000000070000003f
>>>>> [ 0.210777] #1 #3 #5 #7
>>>>> [ 0.215011] smp: Brought up 1 node, 16 CPUs
>>>>> [ 0.215011] smpboot: Total of 16 processors activated
>> (79903.00
>>>> BogoMIPS)
>>>>> [ 0.217482] Memory: 65276284K/66671508K available (18432K
>> kernel
>>>> code, 2185K rwdata, 13516K rodata, 3452K init, 3432K bss,
>> 1370520K
>>>> reserved, 0K cma-reserved)
>>>>> [ 0.218690] devtmpfs: initialized
>>>>> [ 0.218690] x86/mm: Memory block size: 2048MB
>>>>> [ 0.218690] ACPI: PM: Registering ACPI NVS region [mem
>>>> 0x56d49000-0x56ecefff] (1597440 bytes)
>>>>> [ 0.218690] clocksource: jiffies: mask: 0xffffffff
>> max_cycles:
>>>> 0xffffffff, max_idle_ns: 6370867519511994 ns
>>>>> [ 0.218690] futex hash table entries: 4096 (order: 6, 262144
>>>> bytes, linear)
>>>>> [ 0.218690] pinctrl core: initialized pinctrl subsystem
>>>>> [ 0.218690] PM: RTC time: 15:43:42, date: 2024-09-17
>>>>> [ 0.218690] NET: Registered PF_NETLINK/PF_ROUTE protocol
>> family
>>>>> [ 0.218690] DMA: preallocated 4096 KiB GFP_KERNEL pool for
>>>> atomic allocations
>>>>> [ 0.218815] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA
>> pool
>>>> for atomic allocations
>>>>> [ 0.220935] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32
>> pool
>>>> for atomic allocations
>>>>> [ 0.220946] audit: initializing netlink subsys (disabled)
>>>>> [ 0.220955] audit: type=2000 audit(1726587822.023:1):
>>>> state=initialized audit_enabled=0 res=1
>>>>> [ 0.220955] thermal_sys: Registered thermal governor
>>>> 'fair_share'
>>>>> [ 0.220955] thermal_sys: Registered thermal governor
>> 'bang_bang'
>>>>> [ 0.220955] thermal_sys: Registered thermal governor
>> 'step_wise'
>>>>> [ 0.220955] thermal_sys: Registered thermal governor
>>>> 'user_space'
>>>>> [ 0.220955] thermal_sys: Registered thermal governor
>>>> 'power_allocator'
>>>>> [ 0.220955] cpuidle: using governor ladder
>>>>> [ 0.220955] cpuidle: using governor menu
>>>>> [ 0.220955] acpiphp: ACPI Hot Plug PCI Controller Driver
>>>> version: 0.5
>>>>> [ 0.220955] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base
>>>> 0xc0000000) for domain 0000 [bus 00-ff]
>>>>> [ 0.220955] PCI: Using configuration type 1 for base access
>>>>> [ 0.220955] kprobes: kprobe jump-optimization is enabled.
>> All
>>>> kprobes are optimized if possible.
>>>>> [ 0.224191] HugeTLB: registered 1.00 GiB page size, pre-
>>>> allocated 0 pages
>>>>> [ 0.224191] HugeTLB: 16380 KiB vmemmap can be freed for a
>> 1.00
>>>> GiB page
>>>>> [ 0.224191] HugeTLB: registered 2.00 MiB page size, pre-
>>>> allocated 0 pages
>>>>> [ 0.224191] HugeTLB: 28 KiB vmemmap can be freed for a 2.00
>> MiB
>>>> page
>>>>> [ 0.224500] ACPI: Added _OSI(Module Device)
>>>>> [ 0.224500] ACPI: Added _OSI(Processor Device)
>>>>> [ 0.224500] ACPI: Added _OSI(3.0 _SCP Extensions)
>>>>> [ 0.224500] ACPI: Added _OSI(Processor Aggregator Device)
>>>>> [ 0.312844] ACPI: 14 ACPI AML tables successfully acquired
>> and
>>>> loaded
>>>>> [ 0.336673] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+
>>>> PCIe+ XDomain+
>>>>> [ 0.336675] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+
>>>> PCIe+ XDomain+
>>>>> [ 0.338150] ACPI: Dynamic OEM Table Load:
>>>>> [ 0.338158] ACPI: SSDT 0xFFFF9118C178D400 000394 (v02
>>>> PmRef Cpu0Cst 00003001 INTL 20200717)
>>>>> [ 0.339255] ACPI: Dynamic OEM Table Load:
>>>>> [ 0.339260] ACPI: SSDT 0xFFFF9118C1798000 0005E4 (v02
>>>> PmRef Cpu0Ist 00003000 INTL 20200717)
>>>>> [ 0.340384] ACPI: Dynamic OEM Table Load:
>>>>> [ 0.340388] ACPI: SSDT 0xFFFF9118C2101200 0001AB (v02
>>>> PmRef Cpu0Psd 00003000 INTL 20200717)
>>>>> [ 0.341453] ACPI: Dynamic OEM Table Load:
>>>>> [ 0.341457] ACPI: SSDT 0xFFFF9118C179B000 0004BA (v02
>>>> PmRef Cpu0Hwp 00003000 INTL 20200717)
>>>>> [ 0.342940] ACPI: Dynamic OEM Table Load:
>>>>> [ 0.342947] ACPI: SSDT 0xFFFF9118C1784000 001BAF (v02
>>>> PmRef ApIst 00003000 INTL 20200717)
>>>>> [ 0.344827] ACPI: Dynamic OEM Table Load:
>>>>> [ 0.344833] ACPI: SSDT 0xFFFF9118C1780000 001038 (v02
>>>> PmRef ApHwp 00003000 INTL 20200717)
>>>>> [ 0.346435] ACPI: Dynamic OEM Table Load:
>>>>> [ 0.346441] ACPI: SSDT 0xFFFF9118C21C6000 001349 (v02
>>>> PmRef ApPsd 00003000 INTL 20200717)
>>>>> [ 0.347383] ACPI: Dynamic OEM Table Load:
>>>>> [ 0.347383] ACPI: SSDT 0xFFFF9118C1797000 000FBB (v02
>>>> PmRef ApCst 00003000 INTL 20200717)
>>>>> [ 0.351835] ACPI: EC: EC started
>>>>> [ 0.351836] ACPI: EC: interrupt blocked
>>>>> [ 0.352497] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
>>>>> [ 0.352499] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to
>>>> handle transactions
>>>>> [ 0.352501] ACPI: Interpreter enabled
>>>>> [ 0.352548] ACPI: PM: (supports S0 S3 S4 S5)
>>>>> [ 0.352549] ACPI: Using IOAPIC for interrupt routing
>>>>> [ 0.353800] PCI: Using host bridge windows from ACPI; if
>>>> necessary, use "pci=nocrs" and report a bug
>>>>> [ 0.353801] PCI: Ignoring E820 reservations for host bridge
>>>> windows
>>>>> [ 0.355184] ACPI: Enabled 7 GPEs in block 00 to 7F
>>>>> [ 0.357600] ACPI: \_SB_.PC00.PEG0.PXP_: New power resource
>>>>> [ 0.373986] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTRT: New power
>>>> resource
>>>>> [ 0.374768] ACPI: \_SB_.PC00.PAUD: New power resource
>>>>> [ 0.383767] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
>>>>> [ 0.392041] ACPI: \_SB_.PC00.TBT0: New power resource
>>>>> [ 0.392349] ACPI: \_SB_.PC00.TBT1: New power resource
>>>>> [ 0.392651] ACPI: \_SB_.PC00.D3C_: New power resource
>>>>> [ 0.683890] ACPI: \_TZ_.FN00: New power resource
>>>>> [ 0.683946] ACPI: \_TZ_.FN01: New power resource
>>>>> [ 0.684000] ACPI: \_TZ_.FN02: New power resource
>>>>> [ 0.684056] ACPI: \_TZ_.FN03: New power resource
>>>>> [ 0.684110] ACPI: \_TZ_.FN04: New power resource
>>>>> [ 0.684638] ACPI: \PIN_: New power resource
>>>>> [ 0.685242] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus
>> 00-
>>>> fe])
>>>>> [ 0.685248] acpi PNP0A08:00: _OSC: OS supports
>> [ExtendedConfig
>>>> ASPM ClockPM Segments MSI EDR HPX-Type3]
>>>>> [ 0.686937] acpi PNP0A08:00: _OSC: platform does not support
>>>> [AER]
>>>>> [ 0.690313] acpi PNP0A08:00: _OSC: OS now controls
>> [PCIeHotplug
>>>> SHPCHotplug PME PCIeCapability LTR DPC]
>>>>> [ 0.692570] PCI host bridge to bus 0000:00
>>>>> [ 0.692573] pci_bus 0000:00: root bus resource [io 0x0000-
>>>> 0x0cf7 window]
>>>>> [ 0.692575] pci_bus 0000:00: root bus resource [io 0x0d00-
>>>> 0xffff window]
>>>>> [ 0.692576] pci_bus 0000:00: root bus resource [mem
>> 0x000a0000-
>>>> 0x000bffff window]
>>>>> [ 0.692578] pci_bus 0000:00: root bus resource [mem
>> 0x000e0000-
>>>> 0x000fffff window]
>>>>> [ 0.692579] pci_bus 0000:00: root bus resource [mem
>> 0x68800000-
>>>> 0xbfffffff window]
>>>>> [ 0.692580] pci_bus 0000:00: root bus resource [mem
>>>> 0x4000000000-0x7fffffffff window]
>>>>> [ 0.692581] pci_bus 0000:00: root bus resource [bus 00-fe]
>>>>> [ 0.692868] pci 0000:00:00.0: [8086:4621] type 00 class
>> 0x060000
>>>> conventional PCI endpoint
>>>>> [ 0.693054] pci 0000:00:02.0: [8086:46a6] type 00 class
>> 0x030000
>>>> PCIe Root Complex Integrated Endpoint
>>>>> [ 0.693062] pci 0000:00:02.0: BAR 0 [mem 0x603c000000-
>>>> 0x603cffffff 64bit]
>>>>> [ 0.693067] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-
>>>> 0x400fffffff 64bit pref]
>>>>> [ 0.693070] pci 0000:00:02.0: BAR 4 [io 0x3000-0x303f]
>>>>> [ 0.693084] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for
>>>> graphics
>>>>> [ 0.693086] pci 0000:00:02.0: Video device with shadowed ROM
>> at
>>>> [mem 0x000c0000-0x000dffff]
>>>>> [ 0.693109] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-
>>>> 0x00ffffff 64bit]
>>>>> [ 0.693110] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-
>>>> 0x06ffffff 64bit]: contains BAR 0 for 7 VFs
>>>>> [ 0.693114] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-
>>>> 0x1fffffff 64bit pref]
>>>>> [ 0.693115] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-
>>>> 0xdfffffff 64bit pref]: contains BAR 2 for 7 VFs
>>>>> [ 0.693336] pci 0000:00:06.0: [8086:464d] type 01 class
>> 0x060400
>>>> PCIe Root Port
>>>>> [ 0.693379] pci 0000:00:06.0: PCI bridge to [bus 01]
>>>>> [ 0.693412] pci 0000:00:06.0: bridge window [mem
>> 0x84600000-
>>>> 0x846fffff]
>>>>> [ 0.693547] pci 0000:00:06.0: PME# supported from D0 D3hot
>>>> D3cold
>>>>> [ 0.693596] pci 0000:00:06.0: PTM enabled (root), 4ns
>>>> granularity
>>>>> [ 0.694331] pci 0000:00:07.0: [8086:466e] type 01 class
>> 0x060400
>>>> PCIe Root Port
>>>>> [ 0.694351] pci 0000:00:07.0: PCI bridge to [bus 02-39]
>>>>> [ 0.694355] pci 0000:00:07.0: bridge window [mem
>> 0x78000000-
>>>> 0x841fffff]
>>>>> [ 0.694361] pci 0000:00:07.0: bridge window [mem
>> 0x6020000000-
>>>> 0x603bffffff 64bit pref]
>>>>> [ 0.694383] pci 0000:00:07.0: Overriding RP PIO Log Size to
>> 4
>>>>> [ 0.694445] pci 0000:00:07.0: PME# supported from D0 D3hot
>>>> D3cold
>>>>> [ 0.694469] pci 0000:00:07.0: PTM enabled (root), 4ns
>>>> granularity
>>>>> [ 0.696553] pci 0000:00:07.2: [8086:462f] type 01 class
>> 0x060400
>>>> PCIe Root Port
>>>>> [ 0.696570] pci 0000:00:07.2: PCI bridge to [bus 3a-63]
>>>>> [ 0.696574] pci 0000:00:07.2: bridge window [mem
>> 0x6a000000-
>>>> 0x761fffff]
>>>>> [ 0.696580] pci 0000:00:07.2: bridge window [mem
>> 0x6000000000-
>>>> 0x601bffffff 64bit pref]
>>>>> [ 0.696602] pci 0000:00:07.2: Overriding RP PIO Log Size to
>> 4
>>>>> [ 0.696664] pci 0000:00:07.2: PME# supported from D0 D3hot
>>>> D3cold
>>>>> [ 0.696688] pci 0000:00:07.2: PTM enabled (root), 4ns
>>>> granularity
>>>>> [ 0.698832] pci 0000:00:08.0: [8086:464f] type 00 class
>> 0x088000
>>>> conventional PCI endpoint
>>>>> [ 0.698840] pci 0000:00:08.0: BAR 0 [mem 0x603d1bb000-
>>>> 0x603d1bbfff 64bit]
>>>>> [ 0.698934] pci 0000:00:0a.0: [8086:467d] type 00 class
>> 0x118000
>>>> PCIe Root Complex Integrated Endpoint
>>>>> [ 0.698941] pci 0000:00:0a.0: BAR 0 [mem 0x603d1a0000-
>>>> 0x603d1a7fff 64bit]
>>>>> [ 0.698958] pci 0000:00:0a.0: enabling Extended Tags
>>>>> [ 0.699060] pci 0000:00:0d.0: [8086:461e] type 00 class
>> 0x0c0330
>>>> conventional PCI endpoint
>>>>> [ 0.699069] pci 0000:00:0d.0: BAR 0 [mem 0x603d190000-
>>>> 0x603d19ffff 64bit]
>>>>> [ 0.699109] pci 0000:00:0d.0: PME# supported from D3hot
>> D3cold
>>>>> [ 0.701032] pci 0000:00:0d.2: [8086:463e] type 00 class
>> 0x0c0340
>>>> conventional PCI endpoint
>>>>> [ 0.701045] pci 0000:00:0d.2: BAR 0 [mem 0x603d140000-
>>>> 0x603d17ffff 64bit]
>>>>> [ 0.701051] pci 0000:00:0d.2: BAR 2 [mem 0x603d1ba000-
>>>> 0x603d1bafff 64bit]
>>>>> [ 0.701083] pci 0000:00:0d.2: supports D1 D2
>>>>> [ 0.701084] pci 0000:00:0d.2: PME# supported from D0 D1 D2
>> D3hot
>>>> D3cold
>>>>> [ 0.701215] pci 0000:00:0d.3: [8086:466d] type 00 class
>> 0x0c0340
>>>> conventional PCI endpoint
>>>>> [ 0.701225] pci 0000:00:0d.3: BAR 0 [mem 0x603d100000-
>>>> 0x603d13ffff 64bit]
>>>>> [ 0.701231] pci 0000:00:0d.3: BAR 2 [mem 0x603d1b9000-
>>>> 0x603d1b9fff 64bit]
>>>>> [ 0.701260] pci 0000:00:0d.3: supports D1 D2
>>>>> [ 0.701261] pci 0000:00:0d.3: PME# supported from D0 D1 D2
>> D3hot
>>>> D3cold
>>>>> [ 0.701532] pci 0000:00:14.0: [8086:51ed] type 00 class
>> 0x0c0330
>>>> conventional PCI endpoint
>>>>> [ 0.701555] pci 0000:00:14.0: BAR 0 [mem 0x603d180000-
>>>> 0x603d18ffff 64bit]
>>>>> [ 0.701655] pci 0000:00:14.0: PME# supported from D3hot
>> D3cold
>>>>> [ 0.703595] pci 0000:00:14.2: [8086:51ef] type 00 class
>> 0x050000
>>>> conventional PCI endpoint
>>>>> [ 0.703617] pci 0000:00:14.2: BAR 0 [mem 0x603d1b0000-
>>>> 0x603d1b3fff 64bit]
>>>>> [ 0.703631] pci 0000:00:14.2: BAR 2 [mem 0x603d1b8000-
>>>> 0x603d1b8fff 64bit]
>>>>> [ 0.703850] pci 0000:00:14.3: [8086:51f0] type 00 class
>> 0x028000
>>>> PCIe Root Complex Integrated Endpoint
>>>>> [ 0.703912] pci 0000:00:14.3: BAR 0 [mem 0x603d1ac000-
>>>> 0x603d1affff 64bit]
>>>>> [ 0.707442] pci 0000:00:14.3: PME# supported from D0 D3hot
>>>> D3cold
>>>>> [ 0.708349] pci 0000:00:15.0: [8086:51e8] type 00 class
>> 0x0c8000
>>>> conventional PCI endpoint
>>>>> [ 0.709079] pci 0000:00:15.0: BAR 0 [mem 0x00000000-
>> 0x00000fff
>>>> 64bit]
>>>>> [ 0.712769] pci 0000:00:15.1: [8086:51e9] type 00 class
>> 0x0c8000
>>>> conventional PCI endpoint
>>>>> [ 0.713499] pci 0000:00:15.1: BAR 0 [mem 0x00000000-
>> 0x00000fff
>>>> 64bit]
>>>>> [ 0.716748] pci 0000:00:16.0: [8086:51e0] type 00 class
>> 0x078000
>>>> conventional PCI endpoint
>>>>> [ 0.716773] pci 0000:00:16.0: BAR 0 [mem 0x603d1b5000-
>>>> 0x603d1b5fff 64bit]
>>>>> [ 0.716868] pci 0000:00:16.0: PME# supported from D3hot
>>>>> [ 0.717491] pci 0000:00:17.0: [8086:51d3] type 00 class
>> 0x010601
>>>> conventional PCI endpoint
>>>>> [ 0.717511] pci 0000:00:17.0: BAR 0 [mem 0x84700000-
>> 0x84701fff]
>>>>> [ 0.717522] pci 0000:00:17.0: BAR 1 [mem 0x84703000-
>> 0x847030ff]
>>>>> [ 0.717533] pci 0000:00:17.0: BAR 2 [io 0x3090-0x3097]
>>>>> [ 0.717543] pci 0000:00:17.0: BAR 3 [io 0x3080-0x3083]
>>>>> [ 0.717554] pci 0000:00:17.0: BAR 4 [io 0x3060-0x307f]
>>>>> [ 0.717564] pci 0000:00:17.0: BAR 5 [mem 0x84702000-
>> 0x847027ff]
>>>>> [ 0.717645] pci 0000:00:17.0: PME# supported from D3hot
>>>>> [ 0.718046] pci 0000:00:1d.0: [8086:51b0] type 01 class
>> 0x060400
>>>> PCIe Root Port
>>>>> [ 0.718078] pci 0000:00:1d.0: PCI bridge to [bus 64]
>>>>> [ 0.718084] pci 0000:00:1d.0: bridge window [mem
>> 0x84400000-
>>>> 0x845fffff]
>>>>> [ 0.718173] pci 0000:00:1d.0: PME# supported from D0 D3hot
>>>> D3cold
>>>>> [ 0.718212] pci 0000:00:1d.0: PTM enabled (root), 4ns
>>>> granularity
>>>>> [ 0.718877] pci 0000:00:1d.2: [8086:51b2] type 01 class
>> 0x060400
>>>> PCIe Root Port
>>>>> [ 0.718909] pci 0000:00:1d.2: PCI bridge to [bus 65]
>>>>> [ 0.718915] pci 0000:00:1d.2: bridge window [mem
>> 0x84200000-
>>>> 0x843fffff]
>>>>> [ 0.719004] pci 0000:00:1d.2: PME# supported from D0 D3hot
>>>> D3cold
>>>>> [ 0.719043] pci 0000:00:1d.2: PTM enabled (root), 4ns
>>>> granularity
>>>>> [ 0.719752] pci 0000:00:1f.0: [8086:5182] type 00 class
>> 0x060100
>>>> conventional PCI endpoint
>>>>> [ 0.720154] pci 0000:00:1f.3: [8086:51c8] type 00 class
>> 0x040100
>>>> conventional PCI endpoint
>>>>> [ 0.720216] pci 0000:00:1f.3: BAR 0 [mem 0x603d1a8000-
>>>> 0x603d1abfff 64bit]
>>>>> [ 0.720290] pci 0000:00:1f.3: BAR 4 [mem 0x603d000000-
>>>> 0x603d0fffff 64bit]
>>>>> [ 0.720451] pci 0000:00:1f.3: PME# supported from D3hot
>> D3cold
>>>>> [ 0.721057] pci 0000:00:1f.4: [8086:51a3] type 00 class
>> 0x0c0500
>>>> conventional PCI endpoint
>>>>> [ 0.721086] pci 0000:00:1f.4: BAR 0 [mem 0x603d1b4000-
>>>> 0x603d1b40ff 64bit]
>>>>> [ 0.721112] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
>>>>> [ 0.721397] pci 0000:00:1f.5: [8086:51a4] type 00 class
>> 0x0c8000
>>>> conventional PCI endpoint
>>>>> [ 0.721419] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-
>> 0xfe010fff]
>>>>> [ 0.722353] pci 0000:01:00.0: [15b7:5030] type 00 class
>> 0x010802
>>>> PCIe Endpoint
>>>>> [ 0.722365] pci 0000:01:00.0: BAR 0 [mem 0x84600000-
>> 0x84603fff
>>>> 64bit]
>>>>> [ 0.722554] pci 0000:00:06.0: PCI bridge to [bus 01]
>>>>> [ 0.722587] pci 0000:00:07.0: PCI bridge to [bus 02-39]
>>>>> [ 0.722619] pci 0000:00:07.2: PCI bridge to [bus 3a-63]
>>>>> [ 0.722800] pci 0000:64:00.0: [8086:15f3] type 00 class
>> 0x020000
>>>> PCIe Endpoint
>>>>> [ 0.722819] pci 0000:64:00.0: BAR 0 [mem 0x84400000-
>> 0x844fffff]
>>>>> [ 0.722844] pci 0000:64:00.0: BAR 3 [mem 0x84500000-
>> 0x84503fff]
>>>>> [ 0.722977] pci 0000:64:00.0: PME# supported from D0 D3hot
>>>> D3cold
>>>>> [ 0.723313] pci 0000:00:1d.0: PCI bridge to [bus 64]
>>>>> [ 0.723788] pci 0000:65:00.0: [8086:125c] type 00 class
>> 0x020000
>>>> PCIe Endpoint
>>>>> [ 0.723806] pci 0000:65:00.0: BAR 0 [mem 0x84200000-
>> 0x842fffff]
>>>>> [ 0.723831] pci 0000:65:00.0: BAR 3 [mem 0x84300000-
>> 0x84303fff]
>>>>> [ 0.723963] pci 0000:65:00.0: PME# supported from D0 D3hot
>>>> D3cold
>>>>> [ 0.724773] pci 0000:00:1d.2: PCI bridge to [bus 65]
>>>>> [ 0.731129] ACPI: PCI: Interrupt link LNKA configured for
>> IRQ 0
>>>>> [ 0.731229] ACPI: PCI: Interrupt link LNKB configured for
>> IRQ 1
>>>>> [ 0.731327] ACPI: PCI: Interrupt link LNKC configured for
>> IRQ 0
>>>>> [ 0.731425] ACPI: PCI: Interrupt link LNKD configured for
>> IRQ 0
>>>>> [ 0.731523] ACPI: PCI: Interrupt link LNKE configured for
>> IRQ 0
>>>>> [ 0.731621] ACPI: PCI: Interrupt link LNKF configured for
>> IRQ 0
>>>>> [ 0.731719] ACPI: PCI: Interrupt link LNKG configured for
>> IRQ 0
>>>>> [ 0.731816] ACPI: PCI: Interrupt link LNKH configured for
>> IRQ 0
>>>>> [ 1.109516] Low-power S0 idle used by default for system
>> suspend
>>>>> [ 1.116947] ACPI: EC: interrupt unblocked
>>>>> [ 1.116948] ACPI: EC: event unblocked
>>>>> [ 1.116974] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
>>>>> [ 1.116975] ACPI: EC: GPE=0x6e
>>>>> [ 1.116977] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC
>>>> initialization complete
>>>>> [ 1.116978] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle
>>>> transactions and events
>>>>> [ 1.117430] iommu: Default domain type: Translated
>>>>> [ 1.117430] iommu: DMA domain TLB invalidation policy: lazy
>> mode
>>>>> [ 1.117501] SCSI subsystem initialized
>>>>> [ 1.117507] libata version 3.00 loaded.
>>>>> [ 1.117507] ACPI: bus type USB registered
>>>>> [ 1.117507] usbcore: registered new interface driver usbfs
>>>>> [ 1.117507] usbcore: registered new interface driver hub
>>>>> [ 1.117507] usbcore: registered new device driver usb
>>>>> [ 1.117507] EDAC MC: Ver: 3.0.0
>>>>> [ 1.120822] efivars: Registered efivars operations
>>>>> [ 1.120945] NetLabel: Initializing
>>>>> [ 1.120946] NetLabel: domain hash size = 128
>>>>> [ 1.120947] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
>>>>> [ 1.120965] NetLabel: unlabeled traffic allowed by default
>>>>> [ 1.120970] mctp: management component transport protocol
>> core
>>>>> [ 1.120971] NET: Registered PF_MCTP protocol family
>>>>> [ 1.120974] PCI: Using ACPI for IRQ routing
>>>>> [ 1.188171] PCI: pci_cache_line_size set to 64 bytes
>>>>> [ 1.189575] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-
>> 0xfe010fff]:
>>>> can't claim; no compatible bridge window
>>>>> [ 1.190227] e820: reserve RAM buffer [mem 0x0009e000-
>> 0x0009ffff]
>>>>> [ 1.190229] e820: reserve RAM buffer [mem 0x43ea7000-
>> 0x43ffffff]
>>>>> [ 1.190230] e820: reserve RAM buffer [mem 0x444e6000-
>> 0x47ffffff]
>>>>> [ 1.190231] e820: reserve RAM buffer [mem 0x4dd46000-
>> 0x4fffffff]
>>>>> [ 1.190232] e820: reserve RAM buffer [mem 0x5a800000-
>> 0x5bffffff]
>>>>> [ 1.190233] e820: reserve RAM buffer [mem 0x1097800000-
>>>> 0x1097ffffff]
>>>>> [ 1.190766] pci 0000:00:02.0: vgaarb: setting as boot VGA
>> device
>>>>> [ 1.190766] pci 0000:00:02.0: vgaarb: bridge control
>> possible
>>>>> [ 1.190766] pci 0000:00:02.0: vgaarb: VGA device added:
>>>> decodes=io+mem,owns=io+mem,locks=none
>>>>> [ 1.190766] vgaarb: loaded
>>>>> [ 1.190802] clocksource: Switched to clocksource tsc-early
>>>>> [ 1.191172] VFS: Disk quotas dquot_6.6.0
>>>>> [ 1.191181] VFS: Dquot-cache hash table entries: 512 (order
>> 0,
>>>> 4096 bytes)
>>>>> [ 1.191242] pnp: PnP ACPI init
>>>>> [ 1.191703] system 00:00: [io 0x0a00-0x0a0f] has been
>> reserved
>>>>> [ 1.191706] system 00:00: [io 0x0a10-0x0a2f] has been
>> reserved
>>>>> [ 1.191707] system 00:00: [io 0x0a30-0x0a4f] has been
>> reserved
>>>>> [ 1.191708] system 00:00: [io 0x0a50-0x0a6f] has been
>> reserved
>>>>> [ 1.191709] system 00:00: [io 0x0a70-0x0a7f] has been
>> reserved
>>>>> [ 1.191710] system 00:00: [io 0x0a80-0x0a8f] has been
>> reserved
>>>>> [ 1.191832] system 00:01: [io 0x0680-0x069f] has been
>> reserved
>>>>> [ 1.191834] system 00:01: [io 0x164e-0x164f] has been
>> reserved
>>>>> [ 1.191943] system 00:02: [io 0x1854-0x1857] has been
>> reserved
>>>>> [ 1.192669] pnp 00:03: disabling [mem 0xc0000000-0xcfffffff]
>>>> because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff
>>>> 64bit pref]
>>>>> [ 1.192693] system 00:03: [mem 0xfedc0000-0xfedc7fff] has
>> been
>>>> reserved
>>>>> [ 1.192694] system 00:03: [mem 0xfeda0000-0xfeda0fff] has
>> been
>>>> reserved
>>>>> [ 1.192696] system 00:03: [mem 0xfeda1000-0xfeda1fff] has
>> been
>>>> reserved
>>>>> [ 1.192697] system 00:03: [mem 0xfed20000-0xfed7ffff] could
>> not
>>>> be reserved
>>>>> [ 1.192698] system 00:03: [mem 0xfed90000-0xfed93fff] could
>> not
>>>> be reserved
>>>>> [ 1.192699] system 00:03: [mem 0xfed45000-0xfed8ffff] could
>> not
>>>> be reserved
>>>>> [ 1.192700] system 00:03: [mem 0xfee00000-0xfeefffff] could
>> not
>>>> be reserved
>>>>> [ 1.195625] system 00:04: [io 0x2000-0x20fe] has been
>> reserved
>>>>> [ 1.196381] pnp: PnP ACPI: found 6 devices
>>>>> [ 1.201970] clocksource: acpi_pm: mask: 0xffffff max_cycles:
>>>> 0xffffff, max_idle_ns: 2085701024 ns
>>>>> [ 1.202017] NET: Registered PF_INET protocol family
>>>>> [ 1.202177] IP idents hash table entries: 262144 (order: 9,
>>>> 2097152 bytes, linear)
>>>>> [ 1.215397] tcp_listen_portaddr_hash hash table entries:
>> 32768
>>>> (order: 7, 524288 bytes, linear)
>>>>> [ 1.215446] Table-perturb hash table entries: 65536 (order:
>> 6,
>>>> 262144 bytes, linear)
>>>>> [ 1.215777] TCP established hash table entries: 524288
>> (order:
>>>> 10, 4194304 bytes, linear)
>>>>> [ 1.216299] TCP bind hash table entries: 65536 (order: 9,
>>>> 2097152 bytes, linear)
>>>>> [ 1.216406] TCP: Hash tables configured (established 524288
>> bind
>>>> 65536)
>>>>> [ 1.216608] MPTCP token hash table entries: 65536 (order: 8,
>>>> 1572864 bytes, linear)
>>>>> [ 1.216758] UDP hash table entries: 32768 (order: 8, 1048576
>>>> bytes, linear)
>>>>> [ 1.216899] UDP-Lite hash table entries: 32768 (order: 8,
>>>> 1048576 bytes, linear)
>>>>> [ 1.217011] NET: Registered PF_UNIX/PF_LOCAL protocol family
>>>>> [ 1.217017] NET: Registered PF_XDP protocol family
>>>>> [ 1.217024] pci 0000:00:07.0: bridge window [io 0x1000-
>> 0x0fff]
>>>> to [bus 02-39] add_size 1000
>>>>> [ 1.217028] pci 0000:00:07.2: bridge window [io 0x1000-
>> 0x0fff]
>>>> to [bus 3a-63] add_size 1000
>>>>> [ 1.217038] pci 0000:00:02.0: VF BAR 2 [mem 0x4020000000-
>>>> 0x40ffffffff 64bit pref]: assigned
>>>>> [ 1.217042] pci 0000:00:02.0: VF BAR 0 [mem 0x4010000000-
>>>> 0x4016ffffff 64bit]: assigned
>>>>> [ 1.217045] pci 0000:00:07.0: bridge window [io 0x4000-
>> 0x4fff]:
>>>> assigned
>>>>> [ 1.217047] pci 0000:00:07.2: bridge window [io 0x5000-
>> 0x5fff]:
>>>> assigned
>>>>> [ 1.217049] pci 0000:00:15.0: BAR 0 [mem 0x4017000000-
>>>> 0x4017000fff 64bit]: assigned
>>>>> [ 1.217395] pci 0000:00:15.1: BAR 0 [mem 0x4017001000-
>>>> 0x4017001fff 64bit]: assigned
>>>>> [ 1.217735] pci 0000:00:1f.5: BAR 0 [mem 0x68800000-
>> 0x68800fff]:
>>>> assigned
>>>>> [ 1.217752] pci 0000:00:06.0: PCI bridge to [bus 01]
>>>>> [ 1.217777] pci 0000:00:06.0: bridge window [mem
>> 0x84600000-
>>>> 0x846fffff]
>>>>> [ 1.217810] pci 0000:00:07.0: PCI bridge to [bus 02-39]
>>>>> [ 1.217812] pci 0000:00:07.0: bridge window [io 0x4000-
>>>> 0x4fff]
>>>>> [ 1.217814] pci 0000:00:07.0: bridge window [mem
>> 0x78000000-
>>>> 0x841fffff]
>>>>> [ 1.217817] pci 0000:00:07.0: bridge window [mem
>> 0x6020000000-
>>>> 0x603bffffff 64bit pref]
>>>>> [ 1.217820] pci 0000:00:07.2: PCI bridge to [bus 3a-63]
>>>>> [ 1.217821] pci 0000:00:07.2: bridge window [io 0x5000-
>>>> 0x5fff]
>>>>> [ 1.217824] pci 0000:00:07.2: bridge window [mem
>> 0x6a000000-
>>>> 0x761fffff]
>>>>> [ 1.217826] pci 0000:00:07.2: bridge window [mem
>> 0x6000000000-
>>>> 0x601bffffff 64bit pref]
>>>>> [ 1.217830] pci 0000:00:1d.0: PCI bridge to [bus 64]
>>>>> [ 1.217848] pci 0000:00:1d.0: bridge window [mem
>> 0x84400000-
>>>> 0x845fffff]
>>>>> [ 1.217855] pci 0000:00:1d.2: PCI bridge to [bus 65]
>>>>> [ 1.217859] pci 0000:00:1d.2: bridge window [mem
>> 0x84200000-
>>>> 0x843fffff]
>>>>> [ 1.217867] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7
>>>> window]
>>>>> [ 1.217868] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff
>>>> window]
>>>>> [ 1.217869] pci_bus 0000:00: resource 6 [mem 0x000a0000-
>>>> 0x000bffff window]
>>>>> [ 1.217871] pci_bus 0000:00: resource 7 [mem 0x000e0000-
>>>> 0x000fffff window]
>>>>> [ 1.217872] pci_bus 0000:00: resource 8 [mem 0x68800000-
>>>> 0xbfffffff window]
>>>>> [ 1.217873] pci_bus 0000:00: resource 9 [mem 0x4000000000-
>>>> 0x7fffffffff window]
>>>>> [ 1.217874] pci_bus 0000:01: resource 1 [mem 0x84600000-
>>>> 0x846fffff]
>>>>> [ 1.217875] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
>>>>> [ 1.217876] pci_bus 0000:02: resource 1 [mem 0x78000000-
>>>> 0x841fffff]
>>>>> [ 1.217877] pci_bus 0000:02: resource 2 [mem 0x6020000000-
>>>> 0x603bffffff 64bit pref]
>>>>> [ 1.217878] pci_bus 0000:3a: resource 0 [io 0x5000-0x5fff]
>>>>> [ 1.217879] pci_bus 0000:3a: resource 1 [mem 0x6a000000-
>>>> 0x761fffff]
>>>>> [ 1.217880] pci_bus 0000:3a: resource 2 [mem 0x6000000000-
>>>> 0x601bffffff 64bit pref]
>>>>> [ 1.217881] pci_bus 0000:64: resource 1 [mem 0x84400000-
>>>> 0x845fffff]
>>>>> [ 1.217883] pci_bus 0000:65: resource 1 [mem 0x84200000-
>>>> 0x843fffff]
>>>>> [ 1.219810] PCI: CLS 64 bytes, default 64
>>>>> [ 1.219841] DMAR: Intel-IOMMU force enabled due to platform
>> opt
>>>> in
>>>>> [ 1.219847] DMAR: No ATSR found
>>>>> [ 1.219848] DMAR: No SATC found
>>>>> [ 1.219849] DMAR: IOMMU feature fl1gp_support inconsistent
>>>>> [ 1.219850] DMAR: IOMMU feature pgsel_inv inconsistent
>>>>> [ 1.219851] DMAR: IOMMU feature nwfs inconsistent
>>>>> [ 1.219851] DMAR: IOMMU feature dit inconsistent
>>>>> [ 1.219852] DMAR: IOMMU feature sc_support inconsistent
>>>>> [ 1.219853] DMAR: IOMMU feature dev_iotlb_support
>> inconsistent
>>>>> [ 1.219854] DMAR: dmar0: Using Queued invalidation
>>>>> [ 1.219857] DMAR: dmar1: Using Queued invalidation
>>>>> [ 1.219962] Trying to unpack rootfs image as initramfs...
>>>>> [ 1.220076] pci 0000:00:02.0: Adding to iommu group 0
>>>>> [ 1.220106] pci 0000:00:00.0: Adding to iommu group 1
>>>>> [ 1.220117] pci 0000:00:06.0: Adding to iommu group 2
>>>>> [ 1.220125] pci 0000:00:07.0: Adding to iommu group 3
>>>>> [ 1.220133] pci 0000:00:07.2: Adding to iommu group 4
>>>>> [ 1.220142] pci 0000:00:08.0: Adding to iommu group 5
>>>>> [ 1.220150] pci 0000:00:0a.0: Adding to iommu group 6
>>>>> [ 1.220165] pci 0000:00:0d.0: Adding to iommu group 7
>>>>> [ 1.220172] pci 0000:00:0d.2: Adding to iommu group 7
>>>>> [ 1.220178] pci 0000:00:0d.3: Adding to iommu group 7
>>>>> [ 1.220192] pci 0000:00:14.0: Adding to iommu group 8
>>>>> [ 1.220199] pci 0000:00:14.2: Adding to iommu group 8
>>>>> [ 1.220206] pci 0000:00:14.3: Adding to iommu group 9
>>>>> [ 1.220218] pci 0000:00:15.0: Adding to iommu group 10
>>>>> [ 1.220226] pci 0000:00:15.1: Adding to iommu group 10
>>>>> [ 1.220236] pci 0000:00:16.0: Adding to iommu group 11
>>>>> [ 1.220243] pci 0000:00:17.0: Adding to iommu group 12
>>>>> [ 1.220266] pci 0000:00:1d.0: Adding to iommu group 13
>>>>> [ 1.220282] pci 0000:00:1d.2: Adding to iommu group 14
>>>>> [ 1.220300] pci 0000:00:1f.0: Adding to iommu group 15
>>>>> [ 1.220308] pci 0000:00:1f.3: Adding to iommu group 15
>>>>> [ 1.220316] pci 0000:00:1f.4: Adding to iommu group 15
>>>>> [ 1.220323] pci 0000:00:1f.5: Adding to iommu group 15
>>>>> [ 1.220331] pci 0000:01:00.0: Adding to iommu group 16
>>>>> [ 1.220354] pci 0000:64:00.0: Adding to iommu group 17
>>>>> [ 1.220381] pci 0000:65:00.0: Adding to iommu group 18
>>>>> [ 1.220523] DMAR: Intel(R) Virtualization Technology for
>>>> Directed I/O
>>>>> [ 1.220524] PCI-DMA: Using software bounce buffering for IO
>>>> (SWIOTLB)
>>>>> [ 1.220525] software IO TLB: mapped [mem 0x00000000359f8000-
>>>> 0x00000000399f8000] (64MB)
>>>>> [ 1.220564] clocksource: tsc: mask: 0xffffffffffffffff
>>>> max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns
>>>>> [ 1.220616] clocksource: Switched to clocksource tsc
>>>>> [ 1.220637] platform rtc_cmos: registered platform RTC
>> device
>>>> (no PNP device found)
>>>>> [ 1.227245] Initialise system trusted keyrings
>>>>> [ 1.227255] Key type blacklist registered
>>>>> [ 1.227295] workingset: timestamp_bits=41 max_order=24
>>>> bucket_order=0
>>>>> [ 1.227305] zbud: loaded
>>>>> [ 1.227417] fuse: init (API version 7.40)
>>>>> [ 1.227488] integrity: Platform Keyring initialized
>>>>> [ 1.227490] integrity: Machine keyring initialized
>>>>> [ 1.236155] Key type asymmetric registered
>>>>> [ 1.236158] Asymmetric key parser 'x509' registered
>>>>> [ 1.236181] Block layer SCSI generic (bsg) driver version
>> 0.4
>>>> loaded (major 246)
>>>>> [ 1.236262] io scheduler mq-deadline registered
>>>>> [ 1.236263] io scheduler kyber registered
>>>>> [ 1.236272] io scheduler bfq registered
>>>>> [ 1.236870] pcieport 0000:00:06.0: PME: Signaling with IRQ
>> 122
>>>>> [ 1.237101] pcieport 0000:00:07.0: PME: Signaling with IRQ
>> 123
>>>>> [ 1.237117] pcieport 0000:00:07.0: pciehp: Slot #3 AttnBtn-
>>>> PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock-
>> NoCompl+
>>>> IbPresDis- LLActRep+
>>>>> [ 1.237433] pcieport 0000:00:07.2: PME: Signaling with IRQ
>> 124
>>>>> [ 1.237449] pcieport 0000:00:07.2: pciehp: Slot #5 AttnBtn-
>>>> PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock-
>> NoCompl+
>>>> IbPresDis- LLActRep+
>>>>> [ 1.237758] pcieport 0000:00:1d.0: PME: Signaling with IRQ
>> 125
>>>>> [ 1.238027] pcieport 0000:00:1d.2: PME: Signaling with IRQ
>> 126
>>>>> [ 1.238133] shpchp: Standard Hot Plug PCI Controller Driver
>>>> version: 0.4
>>>>> [ 1.238900] input: Sleep Button as
>>>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
>>>>> [ 1.238922] ACPI: button: Sleep Button [SLPB]
>>>>> [ 1.238952] input: Power Button as
>>>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>>>>> [ 1.238963] ACPI: button: Power Button [PWRB]
>>>>> [ 1.238982] input: Power Button as
>>>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>>>>> [ 1.239063] ACPI: button: Power Button [PWRF]
>>>>> [ 1.243545] thermal LNXTHERM:00: registered as thermal_zone0
>>>>> [ 1.243547] ACPI: thermal: Thermal Zone [TZ00] (54 C)
>>>>> [ 1.243835] Serial: 8250/16550 driver, 32 ports, IRQ sharing
>>>> enabled
>>>>> [ 1.245729] hpet_acpi_add: no address or irqs in _CRS
>>>>> [ 1.245765] Non-volatile memory driver v1.3
>>>>> [ 1.245766] Linux agpgart interface v0.103
>>>>> [ 1.282118] ACPI: bus type drm_connector registered
>>>>> [ 1.283317] Freeing initrd memory: 106196K
>>>>> [ 1.284291] ahci 0000:00:17.0: version 3.0
>>>>> [ 1.284668] ahci 0000:00:17.0: AHCI vers 0001.0301, 32
>> command
>>>> slots, 6 Gbps, SATA mode
>>>>> [ 1.284672] ahci 0000:00:17.0: 1/1 ports implemented (port
>> mask
>>>> 0x2)
>>>>> [ 1.284673] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo
>> only
>>>> pio slum part deso sadm sds
>>>>> [ 1.285087] scsi host0: ahci
>>>>> [ 1.285169] scsi host1: ahci
>>>>> [ 1.285197] ata1: DUMMY
>>>>> [ 1.285212] ata2: SATA max UDMA/133 abar m2048@0x84702000
>> port
>>>> 0x84702180 irq 127 lpm-pol 4
>>>>> [ 1.285284] usbcore: registered new interface driver
>>>> usbserial_generic
>>>>> [ 1.285288] usbserial: USB Serial support registered for
>> generic
>>>>> [ 1.285358] rtc_cmos rtc_cmos: RTC can wake from S4
>>>>> [ 1.287193] rtc_cmos rtc_cmos: registered as rtc0
>>>>> [ 1.287570] rtc_cmos rtc_cmos: setting system clock to 2024-
>> 09-
>>>> 17T15:43:43 UTC (1726587823)
>>>>> [ 1.287610] rtc_cmos rtc_cmos: alarms up to one month, y3k,
>> 114
>>>> bytes nvram
>>>>> [ 1.288735] intel_pstate: Intel P-state driver initializing
>>>>> [ 1.290872] intel_pstate: HWP enabled
>>>>> [ 1.291430] ledtrig-cpu: registered to indicate activity on
>> CPUs
>>>>> [ 1.291876] [drm] Initialized simpledrm 1.0.0 for simple-
>>>> framebuffer.0 on minor 0
>>>>> [ 1.292353] fbcon: Deferring console take-over
>>>>> [ 1.292358] simple-framebuffer simple-framebuffer.0: [drm]
>> fb0:
>>>> simpledrmdrmfb frame buffer device
>>>>> [ 1.292419] hid: raw HID events driver (C) Jiri Kosina
>>>>> [ 1.292473] drop_monitor: Initializing network drop monitor
>>>> service
>>>>> [ 1.292567] NET: Registered PF_INET6 protocol family
>>>>> [ 1.296692] Segment Routing with IPv6
>>>>> [ 1.296693] RPL Segment Routing with IPv6
>>>>> [ 1.296704] In-situ OAM (IOAM) with IPv6
>>>>> [ 1.296720] NET: Registered PF_PACKET protocol family
>>>>> [ 1.299178] ENERGY_PERF_BIAS: Set to 'normal', was
>> 'performance'
>>>>> [ 1.299835] microcode: Current revision: 0x00000434
>>>>> [ 1.299839] microcode: Updated early from: 0x0000042a
>>>>> [ 1.300531] IPI shorthand broadcast: enabled
>>>>> [ 1.301773] sched_clock: Marking stable (1284914767,
>> 15597475)-
>>>>> (1326242945, -25730703)
>>>>> [ 1.302178] registered taskstats version 1
>>>>> [ 1.303378] Loading compiled-in X.509 certificates
>>>>> [ 1.306147] Loaded X.509 cert 'Build time autogenerated
>> kernel
>>>> key: cb8a38269e411cf2cea941e3c19d1521412bd34d'
>>>>> [ 1.308962] zswap: loaded using pool zstd/zsmalloc
>>>>> [ 1.309007] Demotion targets for Node 0: null
>>>>> [ 1.309121] Key type .fscrypt registered
>>>>> [ 1.309121] Key type fscrypt-provisioning registered
>>>>> [ 1.309500] integrity: Loading X.509 certificate: UEFI:db
>>>>> [ 1.309544] integrity: Loaded X.509 cert 'Microsoft
>> Corporation
>>>> UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
>>>>> [ 1.309544] integrity: Loading X.509 certificate: UEFI:db
>>>>> [ 1.309551] integrity: Loaded X.509 cert 'Microsoft Windows
>>>> Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
>>>>> [ 1.309972] PM: Magic number: 8:571:740
>>>>> [ 1.311885] RAS: Correctable Errors collector initialized.
>>>>> [ 1.599328] ata2: SATA link down (SStatus 4 SControl 300)
>>>>> [ 1.601308] clk: Disabling unused clocks
>>>>> [ 1.601325] PM: genpd: Disabling unused power domains
>>>>> [ 1.609973] Freeing unused decrypted memory: 2028K
>>>>> [ 1.610569] Freeing unused kernel image (initmem) memory:
>> 3452K
>>>>> [ 1.610578] Write protecting the kernel read-only data:
>> 32768k
>>>>> [ 1.611494] Freeing unused kernel image (rodata/data gap)
>>>> memory: 820K
>>>>> [ 1.616342] x86/mm: Checked W+X mappings: passed, no W+X
>> pages
>>>> found.
>>>>> [ 1.616345] rodata_test: all tests were successful
>>>>> [ 1.616356] Run /init as init process
>>>>> [ 1.616357] with arguments:
>>>>> [ 1.616357] /init
>>>>> [ 1.616358] with environment:
>>>>> [ 1.616358] HOME=/
>>>>> [ 1.616359] TERM=linux
>>>>> [ 1.738727] xhci_hcd 0000:00:0d.0: xHCI Host Controller
>>>>> [ 1.738738] xhci_hcd 0000:00:0d.0: new USB bus registered,
>>>> assigned bus number 1
>>>>> [ 1.739793] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci
>>>> version 0x120 quirks 0x0000000200009810
>>>>> [ 1.740087] xhci_hcd 0000:00:0d.0: xHCI Host Controller
>>>>> [ 1.740090] xhci_hcd 0000:00:0d.0: new USB bus registered,
>>>> assigned bus number 2
>>>>> [ 1.740093] xhci_hcd 0000:00:0d.0: Host supports USB 3.2
>>>> Enhanced SuperSpeed
>>>>> [ 1.740135] usb usb1: New USB device found, idVendor=1d6b,
>>>> idProduct=0002, bcdDevice= 6.11
>>>>> [ 1.740139] usb usb1: New USB device strings: Mfr=3,
>> Product=2,
>>>> SerialNumber=1
>>>>> [ 1.740141] usb usb1: Product: xHCI Host Controller
>>>>> [ 1.740142] usb usb1: Manufacturer: Linux 6.11.0-rc7-00001-
>>>> g0e2ad6528188-dirty xhci-hcd
>>>>> [ 1.740144] usb usb1: SerialNumber: 0000:00:0d.0
>>>>> [ 1.740282] hub 1-0:1.0: USB hub found
>>>>> [ 1.740289] hub 1-0:1.0: 1 port detected
>>>>> [ 1.740533] usb usb2: New USB device found, idVendor=1d6b,
>>>> idProduct=0003, bcdDevice= 6.11
>>>>> [ 1.740535] usb usb2: New USB device strings: Mfr=3,
>> Product=2,
>>>> SerialNumber=1
>>>>> [ 1.740537] usb usb2: Product: xHCI Host Controller
>>>>> [ 1.740538] usb usb2: Manufacturer: Linux 6.11.0-rc7-00001-
>>>> g0e2ad6528188-dirty xhci-hcd
>>>>> [ 1.740539] usb usb2: SerialNumber: 0000:00:0d.0
>>>>> [ 1.740628] hub 2-0:1.0: USB hub found
>>>>> [ 1.740635] hub 2-0:1.0: 3 ports detected
>>>>> [ 1.741581] xhci_hcd 0000:00:14.0: xHCI Host Controller
>>>>> [ 1.741586] xhci_hcd 0000:00:14.0: new USB bus registered,
>>>> assigned bus number 3
>>>>> [ 1.742720] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci
>>>> version 0x120 quirks 0x0000100200009810
>>>>> [ 1.743083] xhci_hcd 0000:00:14.0: xHCI Host Controller
>>>>> [ 1.743087] xhci_hcd 0000:00:14.0: new USB bus registered,
>>>> assigned bus number 4
>>>>> [ 1.743089] xhci_hcd 0000:00:14.0: Host supports USB 3.1
>>>> Enhanced SuperSpeed
>>>>> [ 1.743129] usb usb3: New USB device found, idVendor=1d6b,
>>>> idProduct=0002, bcdDevice= 6.11
>>>>> [ 1.743131] usb usb3: New USB device strings: Mfr=3,
>> Product=2,
>>>> SerialNumber=1
>>>>> [ 1.743132] usb usb3: Product: xHCI Host Controller
>>>>> [ 1.743133] usb usb3: Manufacturer: Linux 6.11.0-rc7-00001-
>>>> g0e2ad6528188-dirty xhci-hcd
>>>>> [ 1.743134] usb usb3: SerialNumber: 0000:00:14.0
>>>>> [ 1.743239] hub 3-0:1.0: USB hub found
>>>>> [ 1.743267] hub 3-0:1.0: 12 ports detected
>>>>> [ 1.745297] usb usb4: New USB device found, idVendor=1d6b,
>>>> idProduct=0003, bcdDevice= 6.11
>>>>> [ 1.745299] usb usb4: New USB device strings: Mfr=3,
>> Product=2,
>>>> SerialNumber=1
>>>>> [ 1.745301] usb usb4: Product: xHCI Host Controller
>>>>> [ 1.745302] usb usb4: Manufacturer: Linux 6.11.0-rc7-00001-
>>>> g0e2ad6528188-dirty xhci-hcd
>>>>> [ 1.745302] usb usb4: SerialNumber: 0000:00:14.0
>>>>> [ 1.745388] hub 4-0:1.0: USB hub found
>>>>> [ 1.745410] hub 4-0:1.0: 4 ports detected
>>>>> [ 1.761523] nvme 0000:01:00.0: platform quirk: setting
>> simple
>>>> suspend
>>>>> [ 1.761605] nvme nvme0: pci function 0000:01:00.0
>>>>> [ 1.791467] nvme nvme0: 16/0/0 default/read/poll queues
>>>>> [ 1.796102] nvme0n1: p1 p2 p3
>>>>> [ 1.992401] usb 3-4: new high-speed USB device number 2
>> using
>>>> xhci_hcd
>>>>> [ 2.134739] usb 3-4: New USB device found, idVendor=05e3,
>>>> idProduct=0608, bcdDevice=88.32
>>>>> [ 2.134746] usb 3-4: New USB device strings: Mfr=0,
>> Product=1,
>>>> SerialNumber=0
>>>>> [ 2.134748] usb 3-4: Product: USB2.0 Hub
>>>>> [ 2.136254] hub 3-4:1.0: USB hub found
>>>>> [ 2.136751] hub 3-4:1.0: 4 ports detected
>>>>> [ 2.137612] usb: port power management may be unreliable
>>>>> [ 2.203731] usb 2-1: new SuperSpeed USB device number 2
>> using
>>>> xhci_hcd
>>>>> [ 2.237657] usb 2-1: New USB device found, idVendor=045e,
>>>> idProduct=0955, bcdDevice= 1.41
>>>>> [ 2.237662] usb 2-1: New USB device strings: Mfr=1,
>> Product=2,
>>>> SerialNumber=0
>>>>> [ 2.237664] usb 2-1: Product: 4-Port USB 3.0 Hub
>>>>> [ 2.237665] usb 2-1: Manufacturer: Generic
>>>>> [ 2.245834] hub 2-1:1.0: USB hub found
>>>>> [ 2.247480] hub 2-1:1.0: 2 ports detected
>>>>> [ 2.255872] usb 4-1: new SuperSpeed USB device number 2
>> using
>>>> xhci_hcd
>>>>> [ 2.275009] usb 4-1: New USB device found, idVendor=0e8d,
>>>> idProduct=7961, bcdDevice= 1.00
>>>>> [ 2.275014] usb 4-1: New USB device strings: Mfr=6,
>> Product=7,
>>>> SerialNumber=8
>>>>> [ 2.275015] usb 4-1: Product: Wireless_Device
>>>>> [ 2.275017] usb 4-1: Manufacturer: MediaTek Inc.
>>>>> [ 2.275018] usb 4-1: SerialNumber: 000000000
>>>>> [ 2.395819] usb 3-6: new high-speed USB device number 3
>> using
>>>> xhci_hcd
>>>>> [ 2.469827] i915 0000:00:02.0: [drm] Found ALDERLAKE_P
>> (device
>>>> ID 46a6) display version 13.00
>>>>> [ 2.470484] i915 0000:00:02.0: [drm] VT-d active for gfx
>> access
>>>>> [ 2.526904] i915 0000:00:02.0: vgaarb: deactivate vga
>> console
>>>>> [ 2.527166] i915 0000:00:02.0: [drm] Using Transparent
>> Hugepages
>>>>> [ 2.529267] i915 0000:00:02.0: vgaarb: VGA decodes changed:
>>>> olddecodes=io+mem,decodes=io+mem:owns=io+mem
>>>>> [ 2.534856] i915 0000:00:02.0: [drm] Finished loading DMC
>>>> firmware i915/adlp_dmc.bin (v2.20)
>>>>> [ 2.535899] usb 2-1.1: new SuperSpeed USB device number 3
>> using
>>>> xhci_hcd
>>>>> [ 2.557014] usb 3-6: New USB device found, idVendor=045e,
>>>> idProduct=0957, bcdDevice= 1.41
>>>>> [ 2.557029] usb 3-6: New USB device strings: Mfr=1,
>> Product=2,
>>>> SerialNumber=0
>>>>> [ 2.557035] usb 3-6: Product: 4-Port USB 2.0 Hub
>>>>> [ 2.557039] usb 3-6: Manufacturer: Generic
>>>>> [ 2.557797] usb 2-1.1: New USB device found, idVendor=045e,
>>>> idProduct=0927, bcdDevice=31.00
>>>>> [ 2.557814] usb 2-1.1: New USB device strings: Mfr=1,
>> Product=2,
>>>> SerialNumber=6
>>>>> [ 2.557819] usb 2-1.1: Product: Ethernet Adapter
>>>>> [ 2.557823] usb 2-1.1: Manufacturer: Microsoft
>>>>> [ 2.557826] usb 2-1.1: SerialNumber: 0013DF804
>>>>> [ 2.561404] hub 3-6:1.0: USB hub found
>>>>> [ 2.563028] hub 3-6:1.0: 2 ports detected
>>>>> [ 2.645045] i915 0000:00:02.0: [drm] GT0: GuC firmware
>>>> i915/adlp_guc_70.bin version 70.29.2
>>>>> [ 2.645051] i915 0000:00:02.0: [drm] GT0: HuC firmware
>>>> i915/tgl_huc.bin version 7.9.3
>>>>> [ 2.659283] i915 0000:00:02.0: [drm] GT0: HuC: authenticated
>> for
>>>> all workloads
>>>>> [ 2.660460] i915 0000:00:02.0: [drm] GT0: GUC: submission
>>>> enabled
>>>>> [ 2.660462] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
>>>>> [ 2.661015] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
>>>>> [ 2.662137] i915 0000:00:02.0: [drm] Protected Xe Path (PXP)
>>>> protected content support initialized
>>>>> [ 2.689226] usb 3-7: new full-speed USB device number 4
>> using
>>>> xhci_hcd
>>>>> [ 2.695739] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on
>>>> minor 1
>>>>> [ 2.698285] ACPI: video: Video Device [GFX0] (multi-head:
>>>> yes rom: no post: no)
>>>>> [ 2.699207] input: Video Bus as
>>>>
>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
>>>>> [ 2.737465] fbcon: i915drmfb (fb0) is primary device
>>>>> [ 2.737467] fbcon: Deferring console take-over
>>>>> [ 2.737468] i915 0000:00:02.0: [drm] fb0: i915drmfb frame
>> buffer
>>>> device
>>>>> [ 2.835767] usb 3-7: New USB device found, idVendor=045e,
>>>> idProduct=0800, bcdDevice= 9.34
>>>>> [ 2.835772] usb 3-7: New USB device strings: Mfr=1,
>> Product=2,
>>>> SerialNumber=0
>>>>> [ 2.835773] usb 3-7: Product: Microsoft® Nano Transceiver
>> v2.0
>>>>> [ 2.835775] usb 3-7: Manufacturer: Microsoft
>>>>> [ 2.857652] usbcore: registered new interface driver usbhid
>>>>> [ 2.857654] usbhid: USB HID core driver
>>>>> [ 2.862052] input: Microsoft Microsoft® Nano Transceiver
>> v2.0 as
>>>> /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-
>>>> 7:1.0/0003:045E:0800.0001/input/input4
>>>>> [ 2.965962] hid-generic 0003:045E:0800.0001: input,hidraw0:
>> USB
>>>> HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0]
>> on
>>>> usb-0000:00:14.0-7/input0
>>>>> [ 2.968229] input: Microsoft Microsoft® Nano Transceiver
>> v2.0
>>>> Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-
>>>> 7:1.1/0003:045E:0800.0002/input/input5
>>>>> [ 2.968393] input: Microsoft Microsoft® Nano Transceiver
>> v2.0
>>>> Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-
>>>> 7:1.1/0003:045E:0800.0002/input/input6
>>>>> [ 2.968554] hid-generic 0003:045E:0800.0002: input,hidraw1:
>> USB
>>>> HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on
>> usb-
>>>> 0000:00:14.0-7/input1
>>>>> [ 2.968700] input: Microsoft Microsoft® Nano Transceiver
>> v2.0
>>>> Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-
>>>> 7:1.2/0003:045E:0800.0003/input/input7
>>>>> [ 3.022596] input: Microsoft Microsoft® Nano Transceiver
>> v2.0
>>>> System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-
>>>> 7:1.2/0003:045E:0800.0003/input/input9
>>>>> [ 3.022920] hid-generic 0003:045E:0800.0003:
>>>> input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft
>> Microsoft®
>>>> Nano Transceiver v2.0] on usb-0000:00:14.0-7/input2
>>>>> [ 3.175304] PM: Image not found (code -22)
>>>>> [ 3.196942] fbcon: Taking over console
>>>>> [ 3.209556] Console: switching to colour frame buffer device
>>>> 240x67
>>>>> [ 3.308676] EXT4-fs (nvme0n1p2): mounted filesystem
>> 0420afc7-
>>>> 4947-4e2e-a096-b607b8b7fd93 r/w with ordered data mode. Quota
>> mode:
>>>> none.
>>>>> [ 3.367761] systemd[1]: systemd 256.6-1-arch running in
>> system
>>>> mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT
>>>> +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN
>> +IPTC
>>>> +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2
>>>> +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD
>>>> +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
>>>>> [ 3.367765] systemd[1]: Detected architecture x86-64.
>>>>> [ 3.368553] systemd[1]: Hostname set to <mdp-archnuc>.
>>>>> [ 3.611164] systemd[1]: bpf-restrict-fs: LSM BPF program
>>>> attached
>>>>> [ 3.699797] systemd[1]: Queued start job for default target
>>>> Graphical Interface.
>>>>> [ 3.753107] systemd[1]: Created slice Slice /system/dirmngr.
>>>>> [ 3.753888] systemd[1]: Created slice Slice /system/getty.
>>>>> [ 3.754461] systemd[1]: Created slice Slice /system/gpg-
>> agent.
>>>>> [ 3.755011] systemd[1]: Created slice Slice /system/gpg-
>> agent-
>>>> browser.
>>>>> [ 3.755524] systemd[1]: Created slice Slice /system/gpg-
>> agent-
>>>> extra.
>>>>> [ 3.755998] systemd[1]: Created slice Slice /system/gpg-
>> agent-
>>>> ssh.
>>>>> [ 3.756450] systemd[1]: Created slice Slice /system/keyboxd.
>>>>> [ 3.756684] systemd[1]: Created slice Slice
>> /system/modprobe.
>>>>> [ 3.756803] systemd[1]: Created slice Slice /system/systemd-
>>>> fsck.
>>>>> [ 3.756872] systemd[1]: Created slice User and Session
>> Slice.
>>>>> [ 3.756893] systemd[1]: Started Dispatch Password Requests
>> to
>>>> Console Directory Watch.
>>>>> [ 3.756908] systemd[1]: Started Forward Password Requests to
>>>> Wall Directory Watch.
>>>>> [ 3.756982] systemd[1]: Set up automount Arbitrary
>> Executable
>>>> File Formats File System Automount Point.
>>>>> [ 3.756989] systemd[1]: Expecting device /dev/disk/by-
>> uuid/EF7B-
>>>> A70B...
>>>>> [ 3.756993] systemd[1]: Expecting device /dev/disk/by-
>>>> uuid/efa73f2d-495d-448d-a0f0-dd425258b7e5...
>>>>> [ 3.756999] systemd[1]: Reached target Local Encrypted
>> Volumes.
>>>>> [ 3.757005] systemd[1]: Reached target Login Prompts.
>>>>> [ 3.757011] systemd[1]: Reached target Local Integrity
>> Protected
>>>> Volumes.
>>>>> [ 3.757020] systemd[1]: Reached target Path Units.
>>>>> [ 3.757027] systemd[1]: Reached target Remote File Systems.
>>>>> [ 3.757031] systemd[1]: Reached target Slice Units.
>>>>> [ 3.757043] systemd[1]: Reached target Local Verity
>> Protected
>>>> Volumes.
>>>>> [ 3.757076] systemd[1]: Listening on Device-mapper event
>> daemon
>>>> FIFOs.
>>>>> [ 3.760193] systemd[1]: Listening on Process Core Dump
>> Socket.
>>>>> [ 3.760919] systemd[1]: Listening on Credential
>>>> Encryption/Decryption.
>>>>> [ 3.761003] systemd[1]: Listening on Journal Socket
>> (/dev/log).
>>>>> [ 3.761058] systemd[1]: Listening on Journal Sockets.
>>>>> [ 3.761093] systemd[1]: TPM PCR Measurements was skipped
>> because
>>>> of an unmet condition check (ConditionSecurity=measured-uki).
>>>>> [ 3.761109] systemd[1]: Make TPM PCR Policy was skipped
>> because
>>>> of an unmet condition check (ConditionSecurity=measured-uki).
>>>>> [ 3.761165] systemd[1]: Listening on udev Control Socket.
>>>>> [ 3.761202] systemd[1]: Listening on udev Kernel Socket.
>>>>> [ 3.762311] systemd[1]: Mounting Huge Pages File System...
>>>>> [ 3.763074] systemd[1]: Mounting POSIX Message Queue File
>>>> System...
>>>>> [ 3.763792] systemd[1]: Mounting Kernel Debug File System...
>>>>> [ 3.764350] systemd[1]: Mounting Kernel Trace File System...
>>>>> [ 3.765317] systemd[1]: Starting Create List of Static
>> Device
>>>> Nodes...
>>>>> [ 3.766158] systemd[1]: Starting Load Kernel Module
>> configfs...
>>>>> [ 3.766682] systemd[1]: Starting Load Kernel Module
>> dm_mod...
>>>>> [ 3.767934] systemd[1]: Starting Load Kernel Module drm...
>>>>> [ 3.769088] systemd[1]: Starting Load Kernel Module fuse...
>>>>> [ 3.770335] systemd[1]: Starting Load Kernel Module loop...
>>>>> [ 3.770384] systemd[1]: File System Check on Root Device was
>>>> skipped because of an unmet condition check
>>>> (ConditionPathIsReadWrite=!/).
>>>>> [ 3.770425] systemd[1]: Clear Stale Hibernate Storage Info
>> was
>>>> skipped because of an unmet condition check
>>>> (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-
>>>> 8cf2644b-4b0b-428f-9387-6d876050dc67).
>>>>> [ 3.772057] systemd[1]: Starting Journal Service...
>>>>> [ 3.772971] systemd[1]: Starting Load Kernel Modules...
>>>>> [ 3.772986] systemd[1]: TPM PCR Machine ID Measurement was
>>>> skipped because of an unmet condition check
>>>> (ConditionSecurity=measured-uki).
>>>>> [ 3.773641] systemd[1]: Starting Remount Root and Kernel
>> File
>>>> Systems...
>>>>> [ 3.773677] systemd[1]: Early TPM SRK Setup was skipped
>> because
>>>> of an unmet condition check (ConditionSecurity=measured-uki).
>>>>> [ 3.774224] systemd[1]: Starting Load udev Rules from
>>>> Credentials...
>>>>> [ 3.774948] systemd[1]: Starting Coldplug All udev
>> Devices...
>>>>> [ 3.777379] systemd[1]: Mounted Huge Pages File System.
>>>>> [ 3.777453] systemd[1]: Mounted POSIX Message Queue File
>> System.
>>>>> [ 3.777510] systemd[1]: Mounted Kernel Debug File System.
>>>>> [ 3.777561] systemd[1]: Mounted Kernel Trace File System.
>>>>> [ 3.777759] systemd[1]: Finished Create List of Static
>> Device
>>>> Nodes.
>>>>> [ 3.777978] systemd[1]: modprobe@configfs.service:
>> Deactivated
>>>> successfully.
>>>>> [ 3.778112] systemd[1]: Finished Load Kernel Module
>> configfs.
>>>>> [ 3.778286] systemd[1]: modprobe@drm.service: Deactivated
>>>> successfully.
>>>>> [ 3.778411] systemd[1]: Finished Load Kernel Module drm.
>>>>> [ 3.778575] systemd[1]: modprobe@fuse.service: Deactivated
>>>> successfully.
>>>>> [ 3.778688] systemd[1]: Finished Load Kernel Module fuse.
>>>>> [ 3.779305] systemd[1]: Mounting FUSE Control File System...
>>>>> [ 3.780063] systemd[1]: Mounting Kernel Configuration File
>>>> System...
>>>>> [ 3.780929] systemd[1]: Starting Create Static Device Nodes
>> in
>>>> /dev gracefully...
>>>>> [ 3.782976] systemd[1]: Finished Load udev Rules from
>>>> Credentials.
>>>>> [ 3.783391] loop: module loaded
>>>>> [ 3.784044] systemd[1]: modprobe@loop.service: Deactivated
>>>> successfully.
>>>>> [ 3.784330] systemd[1]: Finished Load Kernel Module loop.
>>>>> [ 3.785492] systemd[1]: Mounted FUSE Control File System.
>>>>> [ 3.785629] systemd[1]: Mounted Kernel Configuration File
>>>> System.
>>>>> [ 3.785810] systemd-journald[395]: Collecting audit messages
>> is
>>>> disabled.
>>>>> [ 3.798212] i2c_dev: i2c /dev entries driver
>>>>> [ 3.799115] systemd[1]: Finished Load Kernel Modules.
>>>>> [ 3.799850] systemd[1]: Starting Apply Kernel Variables...
>>>>> [ 3.799991] device-mapper: uevent: version 1.0.3
>>>>> [ 3.800058] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01)
>>>> initialised: dm-devel@xxxxxxxxxxxxxxx
>>>>> [ 3.800371] systemd[1]: modprobe@dm_mod.service: Deactivated
>>>> successfully.
>>>>> [ 3.800462] systemd[1]: Finished Load Kernel Module dm_mod.
>>>>> [ 3.800633] systemd[1]: Repartition Root Disk was skipped
>>>> because no trigger condition checks were met.
>>>>> [ 3.805467] systemd[1]: Finished Create Static Device Nodes
>> in
>>>> /dev gracefully.
>>>>> [ 3.806389] systemd[1]: Finished Apply Kernel Variables.
>>>>> [ 3.806887] systemd[1]: Started Journal Service.
>>>>> [ 3.832625] EXT4-fs (nvme0n1p2): re-mounted 0420afc7-4947-
>> 4e2e-
>>>> a096-b607b8b7fd93 r/w. Quota mode: none.
>>>>> [ 3.840126] systemd-journald[395]: Received client request
>> to
>>>> flush runtime journal.
>>>>> [ 3.843896] Adding 67108860k swap on /swapfile. Priority:-2
>>>> extents:86 across:334987260k SS
>>>>> [ 3.946711] mc: Linux media interface: v0.10
>>>>> [ 3.950655] mousedev: PS/2 mouse device common for all mice
>>>>> [ 3.971833] resource: resource sanity check: requesting [mem
>>>> 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp
>>>> 00:03 [mem 0xfedc0000-0xfedc7fff]
>>>>> [ 3.971839] caller igen6_probe+0x15e/0x7c0 [igen6_edac]
>> mapping
>>>> multiple BARs
>>>>> [ 3.975353] EDAC MC0: Giving out device to module igen6_edac
>>>> controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT)
>>>>> [ 3.975402] EDAC MC1: Giving out device to module igen6_edac
>>>> controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT)
>>>>> [ 3.975427] EDAC igen6 MC0: HANDLING IBECC MEMORY ERROR
>>>>> [ 3.975428] EDAC igen6 MC0: ADDR 0x7fffffffe0
>>>>> [ 3.975454] intel_pmc_core INT33A1:00: initialized
>>>>> [ 3.975552] EDAC igen6 MC1: HANDLING IBECC MEMORY ERROR
>>>>> [ 3.975556] EDAC igen6 MC1: ADDR 0x7fffffffe0
>>>>> [ 3.976644] EDAC igen6: v2.5.1
>>>>> [ 3.985687] videodev: Linux video capture interface: v2.00
>>>>> [ 3.985762] pps_core: LinuxPPS API ver. 1 registered
>>>>> [ 3.985765] pps_core: Software ver. 5.3.6 - Copyright 2005-
>> 2007
>>>> Rodolfo Giometti <giometti@xxxxxxxx>
>>>>> [ 3.988981] input: PC Speaker as
>>>> /devices/platform/pcspkr/input/input10
>>>>> [ 3.996243] PTP clock support registered
>>>>> [ 3.999181] mei_me 0000:00:16.0: enabling device (0000 ->
>> 0002)
>>>>> [ 4.000730] i801_smbus 0000:00:1f.4: enabling device (0000
>> ->
>>>> 0003)
>>>>> [ 4.001128] i801_smbus 0000:00:1f.4: SPD Write Disable is
>> set
>>>>> [ 4.001184] i801_smbus 0000:00:1f.4: SMBus using PCI
>> interrupt
>>>>> [ 4.004969] i2c i2c-13: Successfully instantiated SPD at
>> 0x50
>>>>> [ 4.008414] intel-lpss 0000:00:15.0: enabling device (0004
>> ->
>>>> 0006)
>>>>> [ 4.008861] idma64 idma64.0: Found Intel integrated DMA 64-
>> bit
>>>>> [ 4.027139] Serial bus multi instantiate pseudo device
>> driver
>>>> INT3515:00: error -ENXIO: IRQ index 1 not found
>>>>> [ 4.027145] Serial bus multi instantiate pseudo device
>> driver
>>>> INT3515:00: error -ENXIO: Error requesting irq at index 1
>>>>> [ 4.029512] ACPI: bus type thunderbolt registered
>>>>> [ 4.032631] Intel(R) 2.5G Ethernet Linux Driver
>>>>> [ 4.032634] Copyright(c) 2018 Intel Corporation.
>>>>> [ 4.032751] igc 0000:64:00.0: enabling device (0000 -> 0002)
>>>>> [ 4.033014] igc 0000:64:00.0: PTM enabled, 4ns granularity
>>>>> [ 4.038479] intel-lpss 0000:00:15.1: enabling device (0004
>> ->
>>>> 0006)
>>>>> [ 4.038818] idma64 idma64.1: Found Intel integrated DMA 64-
>> bit
>>>>> [ 4.047090] Creating 1 MTD partitions on "0000:00:1f.5":
>>>>> [ 4.047094] 0x000000000000-0x000002000000 : "BIOS"
>>>>> [ 4.079742] pps pps0: new PPS source ptp0
>>>>> [ 4.079786] igc 0000:64:00.0 (unnamed net_device)
>>>> (uninitialized): PHC added
>>>>> [ 4.082583] RAPL PMU: API unit is 2^-32 Joules, 4 fixed
>>>> counters, 655360 ms ovfl timer
>>>>> [ 4.082586] RAPL PMU: hw unit of domain pp0-core 2^-14
>> Joules
>>>>> [ 4.082588] RAPL PMU: hw unit of domain package 2^-14 Joules
>>>>> [ 4.082588] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>>>>> [ 4.082589] RAPL PMU: hw unit of domain psys 2^-14 Joules
>>>>> [ 4.083350] usbcore: registered new device driver r8152-
>>>> cfgselector
>>>>> [ 4.107228] cryptd: max_cpu_qlen set to 1000
>>>>> [ 4.107196] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-
>>>> d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
>>>>> [ 4.107949] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-
>>>> 1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops
>>>> [i915])
>>>>> [ 4.109214] ee1004 13-0050: 512 byte EE1004-compliant SPD
>>>> EEPROM, read-only
>>>>> [ 4.172477] r8152-cfgselector 2-1.1: reset SuperSpeed USB
>> device
>>>> number 3 using xhci_hcd
>>>>> [ 4.187010] Bluetooth: Core ver 2.22
>>>>> [ 4.187025] NET: Registered PF_BLUETOOTH protocol family
>>>>> [ 4.187026] Bluetooth: HCI device and connection manager
>>>> initialized
>>>>> [ 4.187032] Bluetooth: HCI socket layer initialized
>>>>> [ 4.187034] Bluetooth: L2CAP socket layer initialized
>>>>> [ 4.187036] Bluetooth: SCO socket layer initialized
>>>>> [ 4.191558] igc 0000:64:00.0: 4.000 Gb/s available PCIe
>>>> bandwidth (5.0 GT/s PCIe x1 link)
>>>>> [ 4.191562] igc 0000:64:00.0 eth0: MAC: XX:XX:XX:XX:XX:XX
>>>>> [ 4.191837] cfg80211: Loading compiled-in X.509 certificates
>> for
>>>> regulatory database
>>>>> [ 4.191998] igc 0000:65:00.0: enabling device (0000 -> 0002)
>>>>> [ 4.192549] igc 0000:65:00.0: PTM enabled, 4ns granularity
>>>>> [ 4.193238] AES CTR mode by8 optimization enabled
>>>>> [ 4.194837] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>>>>> [ 4.195017] Loaded X.509 cert 'wens:
>>>> 61c038651aabdcf94bd0ac7ff06c7248db18c600'
>>>>> [ 4.214394] snd_hda_intel 0000:00:1f.3: enabling device
>> (0000 ->
>>>> 0002)
>>>>> [ 4.214598] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0
>> (ops
>>>> i915_audio_component_bind_ops [i915])
>>>>> [ 4.223182] usbcore: registered new interface driver btusb
>>>>> [ 4.224896] Bluetooth: hci0: HW/SW Version: 0x008a008a,
>> Build
>>>> Time: 20240826151221
>>>>> [ 4.243090] pps pps1: new PPS source ptp1
>>>>> [ 4.243291] igc 0000:65:00.0 (unnamed net_device)
>>>> (uninitialized): PHC added
>>>>> [ 4.245647] r8152 2-1.1:1.0 eth1: v1.12.13
>>>>> [ 4.245683] usbcore: registered new interface driver r8152
>>>>> [ 4.261881] usbcore: registered new interface driver
>> cdc_ether
>>>>> [ 4.272727] snd_hda_codec_realtek hdaudioC0D0: autoconfig
>> for
>>>> ALC269VB: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
>>>>> [ 4.272733] snd_hda_codec_realtek
>> hdaudioC0D0: speaker_outs=0
>>>> (0x0/0x0/0x0/0x0/0x0)
>>>>> [ 4.272735] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0
>>>> (0x0/0x0/0x0/0x0/0x0)
>>>>> [ 4.272737] snd_hda_codec_realtek hdaudioC0D0: mono:
>>>> mono_out=0x0
>>>>> [ 4.272738] snd_hda_codec_realtek hdaudioC0D0: inputs:
>>>>> [ 4.272739] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
>>>>> [ 4.283158] igc 0000:65:00.0: 4.000 Gb/s available PCIe
>>>> bandwidth (5.0 GT/s PCIe x1 link)
>>>>> [ 4.283163] igc 0000:65:00.0 eth2: MAC: XX:XX:XX:XX:XX:XX
>>>>> [ 4.285711] igc 0000:64:00.0 enp100s0: renamed from eth0
>>>>> [ 4.303471] Intel(R) Wireless WiFi driver for Linux
>>>>> [ 4.303618] iwlwifi 0000:00:14.3: enabling device (0000 ->
>> 0002)
>>>>> [ 4.306032] iwlwifi 0000:00:14.3: Detected crf-id 0x400410,
>> cnv-
>>>> id 0x80400 wfpm id 0x80000020
>>>>> [ 4.306074] iwlwifi 0000:00:14.3: PCI dev 51f0/0094,
>> rev=0x370,
>>>> rfid=0x2010d000
>>>>> [ 4.306077] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6E
>>>> AX211 160MHz
>>>>> [ 4.310525] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ
>>>> Version: 0.0.2.42
>>>>> [ 4.310859] iwlwifi 0000:00:14.3: loaded firmware version
>>>> 89.202a2f7b.0 so-a0-gf-a0-89.ucode op_mode iwlmvm
>>>>> [ 4.317505] r8152 2-1.1:1.0 enp0s13f0u1u1: renamed from eth1
>>>>> [ 4.317848] igc 0000:65:00.0 enp101s0: renamed from eth2
>>>>> [ 4.326705] input: HDA Intel PCH Mic as
>>>> /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
>>>>> [ 4.326777] input: HDA Intel PCH Headphone as
>>>> /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
>>>>> [ 4.326832] input: HDA Intel PCH HDMI/DP,pcm=3 as
>>>> /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
>>>>> [ 4.326873] input: HDA Intel PCH HDMI/DP,pcm=7 as
>>>> /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
>>>>> [ 4.326939] input: HDA Intel PCH HDMI/DP,pcm=8 as
>>>> /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
>>>>> [ 4.326994] input: HDA Intel PCH HDMI/DP,pcm=9 as
>>>> /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
>>>>> [ 4.430414] intel_tcc_cooling: TCC Offset locked
>>>>> [ 4.555399] intel_rapl_msr: PL4 support detected.
>>>>> [ 4.555425] intel_rapl_common: Found RAPL domain package
>>>>> [ 4.555428] intel_rapl_common: Found RAPL domain core
>>>>> [ 4.555429] intel_rapl_common: Found RAPL domain uncore
>>>>> [ 4.555431] intel_rapl_common: Found RAPL domain psys
>>>>> [ 4.613360] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION:
>>>> 0x20
>>>>> [ 4.613411] iwlwifi 0000:00:14.3:
>> WFPM_LMAC2_PD_NOTIFICATION:
>>>> 0x1f
>>>>> [ 4.613418] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90
>>>>> [ 4.613426] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
>>>>> [ 4.613723] iwlwifi 0000:00:14.3: loaded PNVM version
>> 35148b80
>>>>> [ 4.614836] iwlwifi 0000:00:14.3: RFIm is deactivated,
>> reason =
>>>> 4
>>>>> [ 4.630016] iwlwifi 0000:00:14.3: Detected RF GF,
>>>> rfid=0x2010d000
>>>>> [ 4.700769] iwlwifi 0000:00:14.3: base HW address:
>>>> XX:XX:XX:XX:XX:XX
>>>>> [ 4.833421] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
>>>>> [ 5.452456] EXT4-fs (nvme0n1p3): mounted filesystem
>> efa73f2d-
>>>> 495d-448d-a0f0-dd425258b7e5 r/w with ordered data mode. Quota
>> mode:
>>>> none.
>>>>> [ 5.661641] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>>>>> [ 5.661644] Bluetooth: BNEP filters: protocol multicast
>>>>> [ 5.661647] Bluetooth: BNEP socket layer initialized
>>>>> [ 5.925867] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION:
>>>> 0x20
>>>>> [ 5.925877] iwlwifi 0000:00:14.3:
>> WFPM_LMAC2_PD_NOTIFICATION:
>>>> 0x1f
>>>>> [ 5.925885] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90
>>>>> [ 5.925893] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
>>>>> [ 5.927244] iwlwifi 0000:00:14.3: RFIm is deactivated,
>> reason =
>>>> 4
>>>>> [ 6.019702] iwlwifi 0000:00:14.3: Registered PHC clock:
>> iwlwifi-
>>>> PTP, with index: 2
>>>>> [ 6.248772] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION:
>>>> 0x20
>>>>> [ 6.248782] iwlwifi 0000:00:14.3:
>> WFPM_LMAC2_PD_NOTIFICATION:
>>>> 0x1f
>>>>> [ 6.248790] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90
>>>>> [ 6.248798] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
>>>>> [ 6.250128] iwlwifi 0000:00:14.3: RFIm is deactivated,
>> reason =
>>>> 4
>>>>> [ 7.025262] Bluetooth: hci0: Device setup in 2736415 usecs
>>>>> [ 7.025270] Bluetooth: hci0: HCI Enhanced Setup Synchronous
>>>> Connection command is advertised, but not supported.
>>>>> [ 7.466021] usbcore: registered new interface driver option
>>>>> [ 7.466030] usbserial: USB Serial support registered for GSM
>>>> modem (1-port)
>>>>> [ 8.318933] Bluetooth: hci0: Mediatek coredump end
>>>>> [ 8.566804] igc 0000:64:00.0 enp100s0: NIC Link is Up 1000
>> Mbps
>>>> Full Duplex, Flow Control: RX
>>>>> [ 9.199113] Bluetooth: hci0: Mediatek coredump end
>>>>> [ 9.209081] Bluetooth: hci0: Opcode 0x0c03 failed: -110
>>>>> [ 11.342488] Bluetooth: hci0: Failed to read MSFT supported
>>>> features (-110)
>>>>> [ 13.455279] block nvme0n1: No UUID available providing old
>> NGUID
>>>>> [ 13.478988] Bluetooth: hci0: AOSP get vendor capabilities (-
>> 110)
>>>>> [ 16.117052] wlo1: regulatory prevented using AP config,
>>>> downgraded
>>>>> [ 16.123049] wlo1: authenticate with XX:XX:XX:XX:XX:XX (local
>>>> address=XX:XX:XX:XX:XX:XX)
>>>>> [ 16.124244] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
>>>>> [ 16.166021] wlo1: authenticated
>>>>> [ 16.172421] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
>>>>> [ 16.174455] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX
>>>> (capab=0x111 status=0 aid=1)
>>>>> [ 16.184782] wlo1: associated
>>>>> [ 16.246848] wlo1: Limiting TX power to 23 (26 - 3) dBm as
>>>> advertised by XX:XX:XX:XX:XX:XX
>>>>> [ 17.488650] warning: `ThreadPoolForeg' uses wireless
>> extensions
>>>> which will stop working for Wi-Fi 7 hardware; use nl80211
>>>>> [ 17.531765] platform INT3515:01: deferred probe pending:
>> Serial
>>>> bus multi instantiate pseudo device driver: Error creating i2c-
>>>> client, idx 0
>>>>> [ 17.531769] platform INT3515:02: deferred probe pending:
>> Serial
>>>> bus multi instantiate pseudo device driver: Error creating i2c-
>>>> client, idx 0
>>>>> [ 18.595698] usb 4-1: Disable of device-initiated U1 failed.
>>>>> [ 23.715878] usb 4-1: Disable of device-initiated U2 failed.
>>>>> [ 33.956071] Bluetooth: hci0: Failed to write uhw reg(-110)
>>>>> [ 33.956138] usb 4-1: Disable of device-initiated U2 failed.
>>>>> [ 39.293677] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 44.634497] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 44.841067] usb 4-1: device not accepting address 2, error
>> -62
>>>>> [ 50.186371] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 55.523585] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 55.729841] usb 4-1: device not accepting address 2, error
>> -62
>>>>> [ 61.072634] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 66.407700] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 66.614207] usb 4-1: device not accepting address 2, error
>> -62
>>>>> [ 71.955541] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 77.289925] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 77.496512] usb 4-1: device not accepting address 2, error
>> -62
>>>>> [ 77.513500] usb 4-1: USB disconnect, device number 2
>>>>> [ 82.837128] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 88.171049] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 88.377554] usb 4-1: device not accepting address 3, error
>> -62
>>>>> [ 93.718045] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 99.051387] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 99.258078] usb 4-1: device not accepting address 4, error
>> -62
>>>>> [ 99.266739] usb usb4-port1: attempt power cycle
>>>>> [ 106.518206] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 111.851387] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 112.057840] usb 4-1: device not accepting address 5, error
>> -62
>>>>> [ 117.397862] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 122.732729] xhci_hcd 0000:00:14.0: Timeout while waiting for
>>>> setup device command
>>>>> [ 122.937708] usb 4-1: device not accepting address 6, error
>> -62
>>>>> [ 122.944587] usb usb4-port1: unable to enumerate USB device
>>>>>
>>>>>
>>>>>
>>>>>>
>>>>>>>
>>>>>>> External email : Please do not click links or open
>> attachments
>>>> until
>>>>>>> you have verified the sender or the content.
>>>>>>> Hi,
>>>>>>>
>>>>>>> The 22/08/2024 13:23, Hao Qin wrote:
>>>>>>>> Remove resetting mt7921 before downloading the fw, as it
>> may
>>>> cause
>>>>>>>> command timeout when performing the reset.
>>>>>>>>
>>>>>>>> Signed-off-by: Hao Qin <hao.qin@xxxxxxxxxxxx>
>>>>>>>> ---
>>>>>>>> drivers/bluetooth/btmtk.c | 4 ++--
>>>>>>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>>>>>>>
>>>>>>>> diff --git a/drivers/bluetooth/btmtk.c
>>>> b/drivers/bluetooth/btmtk.c
>>>>>>>> index 2b7c80043aa2..a46f70135cbd 100644
>>>>>>>> --- a/drivers/bluetooth/btmtk.c
>>>>>>>> +++ b/drivers/bluetooth/btmtk.c
>>>>>>>> @@ -1326,7 +1326,6 @@ int btmtk_usb_setup(struct hci_dev
>>>> *hdev)
>>>>>>>> fwname = FIRMWARE_MT7668;
>>>>>>>> break;
>>>>>>>> case 0x7922:
>>>>>>>> -case 0x7961:
>>>>>>>> case 0x7925:
>>>>>>>> /* Reset the device to ensure it's in the initial state
>>>> before
>>>>>>>> * downloading the firmware to ensure.
>>>>>>>> @@ -1334,7 +1333,8 @@ int btmtk_usb_setup(struct hci_dev
>>>> *hdev)
>>>>>>>>
>>>>>>>> if (!test_bit(BTMTK_FIRMWARE_LOADED, &btmtk_data-
>>> flags))
>>>>>>>> btmtk_usb_subsys_reset(hdev, dev_id);
>>>>>>>> -
>>>>>>>> +fallthrough;
>>>>>>>> +case 0x7961:
>>>>>>>> btmtk_fw_get_filename(fw_bin_name, sizeof(fw_bin_name),
>>>> dev_id,
>>>>>>>> fw_version, fw_flavor);
>>>>>>>>
>>>>>>>> --
>>>>>>>> 2.18.0
>>>>>>>>
>>>>>>>
>>>>>>> [Original regression report
>>>>>>>
>>>>>>
>>>>
>> https://lore.kernel.org/linux-bluetooth/ZsTh7Jyug7MbZsLE@xxxxxxxxxxxx/
>>>>>>> ]
>>>>>>>
>>>>>>> Thanks for the patch, I have tested it on top of v6.11-rc7
>> and
>>>> can
>>>>>>> confirm
>>>>>>> that it resolves the initial command timeout issue.
>>>>>>>
>>>>>>> Unfortunately, when using the latest firmware version
>>>> 20240826151221
>>>>>>> from the
>>>>>>> linux-firmware repo I'm still seeing "Mediatek coredump
>> end"
>>>> errors
>>>>>>> followed by MSFT and AOSP errors. The device then appears
>>>>>>> unresponsive
>>>>>>> and the kernel eventually gives up attempting to enumerate:
>>>>>>>
>>>>>>> [ 230.042936] usb 4-3.2: new SuperSpeed USB device number
>> 4
>>>> using
>>>>>>> xhci_hcd
>>>>>>> [ 230.065228] usb 4-3.2: New USB device found,
>> idVendor=0e8d,
>>>>>>> idProduct=7961, bcdDevice= 1.00
>>>>>>> [ 230.065237] usb 4-3.2: New USB device strings: Mfr=6,
>>>> Product=7,
>>>>>>> SerialNumber=8
>>>>>>> [ 230.065240] usb 4-3.2: Product: Wireless_Device
>>>>>>> [ 230.065242] usb 4-3.2: Manufacturer: MediaTek Inc.
>>>>>>> [ 230.065245] usb 4-3.2: SerialNumber: 000000000
>>>>>>> [ 230.101915] Bluetooth: hci2: HW/SW Version: 0x008a008a,
>>>> Build
>>>>>>> Time: 20240826151221
>>>>>>> [ 233.005938] Bluetooth: hci2: Device setup in 2862056
>> usecs
>>>>>>> [ 233.005983] Bluetooth: hci2: HCI Enhanced Setup
>> Synchronous
>>>>>>> Connection command is advertised, but not supported.
>>>>>>> [ 234.306071] Bluetooth: hci2: Mediatek coredump end
>>>>>>> [ 235.092729] Bluetooth: hci2: Opcode 0x0c03 failed: -110
>>>>>>> [ 235.192772] Bluetooth: hci2: Mediatek coredump end
>>>>>>> [ 237.226157] Bluetooth: hci2: Failed to read MSFT
>> supported
>>>>>>> features (-110)
>>>>>>> [ 239.359435] Bluetooth: hci2: AOSP get vendor
>> capabilities (-
>>>> 110)
>>>>>>> [ 244.479726] usb 4-3.2: Disable of device-initiated U1
>>>> failed.
>>>>>>> [ 249.599598] usb 4-3.2: Disable of device-initiated U2
>>>> failed.
>>>>>>> [ 259.839215] Bluetooth: hci2: Failed to write uhw reg(-
>> 110)
>>>>>>> [ 259.839240] usb 4-3.2: Disable of device-initiated U1
>>>> failed.
>>>>>>> [ 264.959343] usb 4-3.2: Disable of device-initiated U2
>>>> failed.
>>>>>>> [ 270.079038] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 275.412299] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 275.618812] usb 4-3.2: device not accepting address 4,
>> error
>>>> -62
>>>>>>> [ 280.958852] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 286.292034] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 286.498618] usb 4-3.2: device not accepting address 4,
>> error
>>>> -62
>>>>>>> [ 291.838759] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 297.172018] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 297.378477] usb 4-3.2: device not accepting address 4,
>> error
>>>> -62
>>>>>>> [ 302.718497] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 308.051867] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 308.258345] usb 4-3.2: device not accepting address 4,
>> error
>>>> -62
>>>>>>> [ 308.260253] usb 4-3.2: USB disconnect, device number 4
>>>>>>> [ 313.598307] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 318.931586] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 319.138278] usb 4-3.2: device not accepting address 5,
>> error
>>>> -62
>>>>>>> [ 324.478224] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 329.811444] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 330.018032] usb 4-3.2: device not accepting address 6,
>> error
>>>> -62
>>>>>>> [ 330.018489] usb 4-3-port2: attempt power cycle
>>>>>>> [ 336.211505] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 341.544640] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 341.751239] usb 4-3.2: device not accepting address 7,
>> error
>>>> -62
>>>>>>> [ 347.091375] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 352.424563] xhci_hcd 0000:00:14.0: Timeout while waiting
>> for
>>>> setup
>>>>>>> device command
>>>>>>> [ 352.631136] usb 4-3.2: device not accepting address 8,
>> error
>>>> -62
>>>>>>> [ 352.631538] usb 4-3-port2: unable to enumerate USB
>> device
>>>>>>>
>>>>>>>
>>>>>>> Interestingly, if I revert back to an known-good firmware
>>>> version
>>>>>>> 20231025113744 along with your patch, the device enumerates
>> and
>>>> works
>>>>>>> fine:
>>>>>>>
>>>>>>> [ 4001.366725] usb 4-1: new SuperSpeed USB device number 4
>>>> using
>>>>>>> xhci_hcd
>>>>>>> [ 4001.385840] usb 4-1: New USB device found,
>> idVendor=0e8d,
>>>>>>> idProduct=7961, bcdDevice= 1.00
>>>>>>> [ 4001.385855] usb 4-1: New USB device strings: Mfr=6,
>>>> Product=7,
>>>>>>> SerialNumber=8
>>>>>>> [ 4001.385860] usb 4-1: Product: Wireless_Device
>>>>>>> [ 4001.385863] usb 4-1: Manufacturer: MediaTek Inc.
>>>>>>> [ 4001.385867] usb 4-1: SerialNumber: 000000000
>>>>>>> [ 4001.398010] Bluetooth: hci1: HW/SW Version: 0x008a008a,
>>>> Build
>>>>>>> Time: 20231025113744
>>>>>>> [ 4004.275656] Bluetooth: hci1: Device setup in 2812288
>> usecs
>>>>>>> [ 4004.275661] Bluetooth: hci1: HCI Enhanced Setup
>> Synchronous
>>>>>>> Connection command is advertised, but not supported.
>>>>>>> [ 4004.355137] Bluetooth: hci1: AOSP extensions version
>> v0.96
>>>>>>> [ 4004.355156] Bluetooth: hci1: AOSP quality report is not
>>>> supported
>>>>>>> [ 4004.355698] Bluetooth: MGMT ver 1.23
>>>>>>>
>>>>>>> But if I then disconnect it, I get the Oops that I shared
>> in my
>>>>>>> original
>>>>>>> regression report:
>>>>>>>
>>>>>>> [ 4043.436215] usb 4-1: USB disconnect, device number 4
>>>>>>> [ 4043.437308] Oops: general protection fault, probably for
>>>> non-
>>>>>>> canonical address 0xdead000000000122: 0000 [#1] PREEMPT SMP
>>>> NOPTI
>>>>>>> [ 4043.437332] CPU: 2 UID: 0 PID: 3698 Comm: kworker/2:0
>> Not
>>>> tainted
>>>>>>> 6.11.0-rc7-00001-g0e2ad6528188-dirty #71
>>>>>>> d90fb9085e2a0686ac48ebcc408d97b104c6fbf1
>>>>>>> [ 4043.437352] Hardware name: Intel(R) Client Systems
>>>>>>> NUC12WSHi7/NUC12WSBi7, BIOS WSADL357.0088.2023.0505.1623
>>>> 05/05/2023
>>>>>>> [ 4043.437361] Workqueue: usb_hub_wq hub_event
>>>>>>> [ 4043.437386] RIP: 0010:hci_unregister_dev+0x45/0x1f0
>>>> [bluetooth]
>>>>>>> [ 4043.437548] Code: 89 ef e8 ae d4 5c c1 f0 80 8b e9 0e 00
>> 00
>>>> 08 48
>>>>>>> 89 ef e8 0e c2 5c c1 48 c7 c7 68 60 52 c1 e8 22 23 5d c1 48
>> 8b
>>>> 43 08
>>>>>>> 48 8b 13 <48> 3b 18 0f 85 f5 c7 06 00 48 3b 5a 08 0f 85 eb
>> c7
>>>> 06 00
>>>>>>> 48 89 42
>>>>>>> [ 4043.437560] RSP: 0018:ffffa10f4ae43b98 EFLAGS: 00010246
>>>>>>> [ 4043.437574] RAX: dead000000000122 RBX: ffff8cf86c160000
>> RCX:
>>>>>>> 0000000000000000
>>>>>>> [ 4043.437585] RDX: dead000000000100 RSI: ffff8cf7b7d16c50
>> RDI:
>>>>>>> ffffffffc1526068
>>>>>>> [ 4043.437594] RBP: ffff8cf86c1604d0 R08: 0000000000000000
>> R09:
>>>>>>> ffff8cf7401d8e10
>>>>>>> [ 4043.437602] R10: ffffa10f4ae43ba0 R11: ffffa10f4ae43ba8
>> R12:
>>>>>>> ffff8cf86c160000
>>>>>>> [ 4043.437610] R13: ffffffffc1416278 R14: ffffffffc1416278
>> R15:
>>>>>>> ffff8cf7f8d73850
>>>>>>> [ 4043.437620] FS: 0000000000000000(0000)
>>>> GS:ffff8d0697300000(0000)
>>>>>>> knlGS:0000000000000000
>>>>>>> [ 4043.437632] CS: 0010 DS: 0000 ES: 0000 CR0:
>>>> 0000000080050033
>>>>>>> [ 4043.437641] CR2: 00007f98d66dc000 CR3: 0000000131124000
>> CR4:
>>>>>>> 0000000000f50ef0
>>>>>>> [ 4043.437651] PKRU: 55555554
>>>>>>> [ 4043.437658] Call Trace:
>>>>>>> [ 4043.437670] <TASK>
>>>>>>> [ 4043.437680] ? __die_body.cold+0x19/0x27
>>>>>>> [ 4043.437700] ? die_addr+0x3c/0x60
>>>>>>> [ 4043.437716] ? exc_general_protection+0x17d/0x400
>>>>>>> [ 4043.437738] ? asm_exc_general_protection+0x26/0x30
>>>>>>> [ 4043.437760] ? hci_unregister_dev+0x45/0x1f0 [bluetooth
>>>>>>> 6dca047d1088401e195d97746b2b4936e5756d61]
>>>>>>> [ 4043.437930] ? hci_unregister_dev+0x3e/0x1f0 [bluetooth
>>>>>>> 6dca047d1088401e195d97746b2b4936e5756d61]
>>>>>>> [ 4043.438080] btusb_disconnect+0x67/0x170 [btusb
>>>>>>> 5bf8186d9cab4c5be1762247dadb6753a7c72a7f]
>>>>>>> [ 4043.438108] usb_unbind_interface+0x90/0x290
>>>>>>> [ 4043.438130] device_release_driver_internal+0x19c/0x200
>>>>>>> [ 4043.438150] bus_remove_device+0xc6/0x130
>>>>>>> [ 4043.438166] device_del+0x161/0x3e0
>>>>>>> [ 4043.438182] ? kobject_put+0xa0/0x1d0
>>>>>>> [ 4043.438196] usb_disable_device+0x104/0x220
>>>>>>> [ 4043.438213] usb_disconnect+0xe6/0x2e0
>>>>>>> [ 4043.438231] hub_event+0x7f9/0x19d0
>>>>>>> [ 4043.438250] ? __pm_runtime_suspend+0x47/0xc0
>>>>>>> [ 4043.438269] process_one_work+0x17b/0x330
>>>>>>> [ 4043.438287] worker_thread+0x2c6/0x3f0
>>>>>>> [ 4043.438304] ? __pfx_worker_thread+0x10/0x10
>>>>>>> [ 4043.438318] kthread+0xcf/0x100
>>>>>>> [ 4043.438337] ? __pfx_kthread+0x10/0x10
>>>>>>> [ 4043.438354] ret_from_fork+0x31/0x50
>>>>>>> [ 4043.438367] ? __pfx_kthread+0x10/0x10
>>>>>>> [ 4043.438382] ret_from_fork_asm+0x1a/0x30
>>>>>>> [ 4043.438403] </TASK>
>>>>>>> [ 4043.438408] Modules linked in: uhid mt792x_usb
>> mt7921_common
>>>>>>> mt792x_lib mt76_connac_lib mt76_usb mt76 ccm option
>> usb_wwan
>>>> cmac
>>>>>>> algif_hash algif_skcipher af_alg sr_mod cdrom bnep mousedev
>>>> joydev
>>>>>>> vfat fat snd_sof_pci_intel_tgl snd_sof_pci_intel_cnl
>>>> intel_rapl_msr
>>>>>>> snd_sof_intel_hda_generic intel_rapl_common soundwire_intel
>>>>>>> intel_uncore_frequency soundwire_cadence
>>>>>>> intel_uncore_frequency_common snd_sof_intel_hda_common
>>>>>>> snd_sof_intel_hda_mlink snd_sof_intel_hda snd_sof_pci
>>>>>>> snd_sof_xtensa_dsp snd_sof iwlmvm snd_sof_utils
>>>> snd_soc_hdac_hda
>>>>>>> snd_soc_acpi_intel_match soundwire_generic_allocation
>>>> snd_soc_acpi
>>>>>>> soundwire_bus snd_soc_avs r8152 x86_pkg_temp_thermal
>>>> intel_powerclamp
>>>>>>> libphy snd_soc_hda_codec coretemp mac80211 snd_hda_ext_core
>>>> kvm_intel
>>>>>>> snd_soc_core snd_hda_codec_hdmi cdc_ether hid_generic uas
>>>> usbnet
>>>>>>> snd_hda_codec_realtek snd_compress kvm usb_storage mii
>> usbhid
>>>>>>> snd_hda_codec_generic ac97_bus snd_pcm_dmaengine
>>>>>>> snd_hda_scodec_component snd_hda_intel libarc4
>> snd_intel_dspcfg
>>>> btusb
>>>>>>> crct10dif_pclmul snd_intel_sdw_acpi
>>>>>>> [ 4043.438617] crc32_pclmul iwlwifi btrtl snd_hda_codec
>>>>>>> polyval_clmulni btintel polyval_generic btbcm
>>>> ghash_clmulni_intel
>>>>>>> sha512_ssse3 btmtk tps6598x sha256_ssse3 snd_hda_core typec
>>>>>>> sha1_ssse3 cfg80211 bluetooth aesni_intel snd_hwdep roles
>>>> gf128mul
>>>>>>> crypto_simd snd_pcm cryptd mei_hdcp mei_pxp rapl ee1004
>> ov13858
>>>>>>> snd_timer intel_cstate igc spi_nor intel_uncore i2c_i801
>>>> thunderbolt
>>>>>>> snd v4l2_fwnode mei_me v4l2_async ptp wdat_wdt i2c_smbus
>> mtd
>>>> pcspkr
>>>>>>> wmi_bmof intel_lpss_pci videodev mei pps_core soundcore
>>>>>>> intel_pmc_core i2c_mux intel_lpss rfkill idma64 igen6_edac
>>>> intel_vsec
>>>>>>> serial_multi_instantiate mc pmt_telemetry pinctrl_tigerlake
>>>> pmt_class
>>>>>>> acpi_pad acpi_tad mac_hid i2c_dev dm_mod sg crypto_user
>> loop
>>>>>>> nfnetlink ip_tables x_tables ext4 crc32c_generic crc16
>> mbcache
>>>> jbd2
>>>>>>> xe drm_ttm_helper gpu_sched drm_suballoc_helper drm_gpuvm
>>>> drm_exec
>>>>>>> i915 i2c_algo_bit drm_buddy ttm nvme intel_gtt
>>>> drm_display_helper
>>>>>>> nvme_core spi_intel_pci cec xhci_pci crc32c_intel spi_intel
>>>> nvme_auth
>>>>>>> xhci_pci_renesas video wmi
>>>>>>> [ 4043.438898] ---[ end trace 0000000000000000 ]---
>>>>>>> [ 4043.438905] RIP: 0010:hci_unregister_dev+0x45/0x1f0
>>>> [bluetooth]
>>>>>>> [ 4043.439039] Code: 89 ef e8 ae d4 5c c1 f0 80 8b e9 0e 00
>> 00
>>>> 08 48
>>>>>>> 89 ef e8 0e c2 5c c1 48 c7 c7 68 60 52 c1 e8 22 23 5d c1 48
>> 8b
>>>> 43 08
>>>>>>> 48 8b 13 <48> 3b 18 0f 85 f5 c7 06 00 48 3b 5a 08 0f 85 eb
>> c7
>>>> 06 00
>>>>>>> 48 89 42
>>>>>>> [ 4043.439048] RSP: 0018:ffffa10f4ae43b98 EFLAGS: 00010246
>>>>>>> [ 4043.439058] RAX: dead000000000122 RBX: ffff8cf86c160000
>> RCX:
>>>>>>> 0000000000000000
>>>>>>> [ 4043.439065] RDX: dead000000000100 RSI: ffff8cf7b7d16c50
>> RDI:
>>>>>>> ffffffffc1526068
>>>>>>> [ 4043.439072] RBP: ffff8cf86c1604d0 R08: 0000000000000000
>> R09:
>>>>>>> ffff8cf7401d8e10
>>>>>>> [ 4043.439078] R10: ffffa10f4ae43ba0 R11: ffffa10f4ae43ba8
>> R12:
>>>>>>> ffff8cf86c160000
>>>>>>> [ 4043.439085] R13: ffffffffc1416278 R14: ffffffffc1416278
>> R15:
>>>>>>> ffff8cf7f8d73850
>>>>>>> [ 4043.439091] FS: 0000000000000000(0000)
>>>> GS:ffff8d0697300000(0000)
>>>>>>> knlGS:0000000000000000
>>>>>>> [ 4043.439100] CS: 0010 DS: 0000 ES: 0000 CR0:
>>>> 0000000080050033
>>>>>>> [ 4043.439108] CR2: 00007f98d66dc000 CR3: 0000000131124000
>> CR4:
>>>>>>> 0000000000f50ef0
>>>>>>> [ 4043.439116] PKRU: 55555554
>>>>>>> [ 4043.439122] note: kworker/2:0[3698] exited with
>>>> preempt_count 1
>>>>>>>
>>>>>>> So, in summary, it looks as though there are two issues
>> here:
>>>>>>>
>>>>>>> 1. The latest firmware does not seem to work well with this
>>>> chipset,
>>>>>>> perhaps it is crashing after loading?
>>>>>>> 2. The Oops in the hci_unregister_dev function suggests
>> some
>>>> HCI
>>>>>>> registration bug.
>>>>>>>
>>>>>>> Let me know if I can provide any further assistance.
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> Marc
>>>>>>>
>>>>>
>>>>> *********** MEDIATEK Confidentiality Notice
>>>>> ***********
>>>>> The information contained in this e-mail message (including any
>>>>> attachments) may be confidential, proprietary, privileged, or
>>>>> otherwise exempt from disclosure under applicable laws. It is
>>>>> intended to be conveyed only to the designated recipient(s).
>> Any
>>>>> use, dissemination, distribution, printing, retaining or
>> copying
>>>>> of this e-mail (including its attachments) by unintended
>>>> recipient(s)
>>>>> is strictly prohibited and may be unlawful. If you are not an
>>>>> intended recipient of this e-mail, or believe that you have
>>>> received
>>>>> this e-mail in error, please notify the sender immediately
>>>>> (by replying to this e-mail), delete any and all copies of this
>>>>> e-mail (including any attachments) from your system, and do not
>>>>> disclose the content of this e-mail to any other person. Thank
>> you!
>>>>
>>>>
>>>>
>>>> --
>>>> Luiz Augusto von Dentz
>>
>> --
>> Marc Payne

#regzbot poke

Next message: Kent Gibson: "Re: [PATCH v2 5/6] gpiolib: switch the line state notifier to atomic"
Previous message: Andrei Simion: "[PATCH v2 RESEND] MAINTAINERS: Update maintainer list for MICROCHIP ASOC, SSC and MCP16502 drivers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]