[PATCH v3 00/11] Add PCIe support for bcm2712

[Stanimir Varbanov]

Hello,

Here is v3 the series to add support for PCIe on bcm2712 SoC
used by RPi5. Previous v2 can be found at [1].

v2 -> v3 changes include:
 - Added Reviewed-by/Acked-by tags.
 - MIP MSI-X driver has been converted to MSI parent.
 - Added a new patch for PHY PLL adjustment need to succesfully
   enumerate PCIe endpoints on extension connector (tested with
   Pineboards AI Bundle + NVME SSD adapter card).
 - Re-introduced brcm,msi-offset DT private property for MIP
   interrupt-controller (without it I'm anable to use the interrupts
   of adapter cards on PCIe enxtension connector).

For more info check patches.

[1] https://patchwork.kernel.org/project/linux-pci/cover/20240910151845.17308-1-svarbanov@xxxxxxx/

Stanimir Varbanov (11):
  dt-bindings: interrupt-controller: Add bcm2712 MSI-X DT bindings
  dt-bindings: PCI: brcmstb: Update bindings for PCIe on bcm2712
  irqchip: mip: Add Broadcom bcm2712 MSI-X interrupt controller
  PCI: brcmstb: Expand inbound size calculation helper
  PCI: brcmstb: Enable external MSI-X if available
  PCI: brcmstb: Avoid turn off of bridge reset
  PCI: brcmstb: Add bcm2712 support
  PCI: brcmstb: Reuse config structure
  PCI: brcmstb: Adjust PHY PLL setup to use a 54MHz input refclk
  arm64: dts: broadcom: bcm2712: Add PCIe DT nodes
  arm64: dts: broadcom: bcm2712-rpi-5-b: Enable PCIe DT nodes

 .../brcm,bcm2712-msix.yaml                    |  60 ++++
 .../bindings/pci/brcm,stb-pcie.yaml           |   5 +-
 .../boot/dts/broadcom/bcm2712-rpi-5-b.dts     |   8 +
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi     | 160 +++++++++
 drivers/irqchip/Kconfig                       |  16 +
 drivers/irqchip/Makefile                      |   1 +
 drivers/irqchip/irq-bcm2712-mip.c             | 308 ++++++++++++++++++
 drivers/pci/controller/pcie-brcmstb.c         | 197 ++++++++---
 8 files changed, 707 insertions(+), 48 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2712-msix.yaml
 create mode 100644 drivers/irqchip/irq-bcm2712-mip.c

-- 
2.43.0