[PATCH v2 4/7] s390/physmem_info: query diag500(STORAGE LIMIT) to support QEMU/KVM memory devices

From: David Hildenbrand
Date: Mon Oct 14 2024 - 10:49:40 EST


To support memory devices under QEMU/KVM, such as virtio-mem,
we have to prepare our kernel virtual address space accordingly and
have to know the highest possible physical memory address we might see
later: the storage limit. The good old SCLP interface is not suitable for
this use case.

In particular, memory owned by memory devices has no relationship to
storage increments, it is always detected using the device driver, and
unaware OSes (no driver) must never try making use of that memory.
Consequently this memory is located outside of the "maximum storage
increment"-indicated memory range.

Let's use our new diag500 STORAGE_LIMIT subcode to query this storage
limit that can exceed the "maximum storage increment", and use the
existing interfaces (i.e., SCLP) to obtain information about the initial
memory that is not owned+managed by memory devices.

If a hypervisor does not support such memory devices, the address exposed
through diag500 STORAGE_LIMIT will correspond to the maximum storage
increment exposed through SCLP.

To teach kdump on s390 to include memory owned by memory devices, there
will be ways to query the relevant memory ranges from the device via a
driver running in special kdump mode (like virtio-mem already implements
to filter /proc/vmcore access so we don't end up reading from unplugged
device blocks).

Tested-by: Mario Casquero <mcasquer@xxxxxxxxxx>
Signed-off-by: David Hildenbrand <david@xxxxxxxxxx>
---
arch/s390/boot/physmem_info.c | 46 ++++++++++++++++++++++++++--
arch/s390/include/asm/physmem_info.h | 3 ++
2 files changed, 46 insertions(+), 3 deletions(-)

diff --git a/arch/s390/boot/physmem_info.c b/arch/s390/boot/physmem_info.c
index 1d131a81cb8b..fb4e66e80fd8 100644
--- a/arch/s390/boot/physmem_info.c
+++ b/arch/s390/boot/physmem_info.c
@@ -109,6 +109,38 @@ static int diag260(void)
return 0;
}

+static int diag500_storage_limit(unsigned long *max_physmem_end)
+{
+ register unsigned long __nr asm("1") = 0x4;
+ register unsigned long __storage_limit asm("2") = 0;
+ unsigned long reg1, reg2;
+ psw_t old;
+
+ asm volatile(
+ " mvc 0(16,%[psw_old]),0(%[psw_pgm])\n"
+ " epsw %[reg1],%[reg2]\n"
+ " st %[reg1],0(%[psw_pgm])\n"
+ " st %[reg2],4(%[psw_pgm])\n"
+ " larl %[reg1],1f\n"
+ " stg %[reg1],8(%[psw_pgm])\n"
+ " diag 2,4,0x500\n"
+ "1: mvc 0(16,%[psw_pgm]),0(%[psw_old])\n"
+ : [reg1] "=&d" (reg1),
+ [reg2] "=&a" (reg2),
+ "+&d" (__storage_limit),
+ "=Q" (get_lowcore()->program_new_psw),
+ "=Q" (old)
+ : [psw_old] "a" (&old),
+ [psw_pgm] "a" (&get_lowcore()->program_new_psw),
+ "d" (__nr)
+ : "memory");
+ if (!__storage_limit)
+ return -EINVAL;
+ /* convert inclusive end to exclusive end. */
+ *max_physmem_end = __storage_limit + 1;
+ return 0;
+}
+
static int tprot(unsigned long addr)
{
unsigned long reg1, reg2;
@@ -157,7 +189,9 @@ unsigned long detect_max_physmem_end(void)
{
unsigned long max_physmem_end = 0;

- if (!sclp_early_get_memsize(&max_physmem_end)) {
+ if (!diag500_storage_limit(&max_physmem_end)) {
+ physmem_info.info_source = MEM_DETECT_DIAG500_STOR_LIMIT;
+ } else if (!sclp_early_get_memsize(&max_physmem_end)) {
physmem_info.info_source = MEM_DETECT_SCLP_READ_INFO;
} else {
max_physmem_end = search_mem_end();
@@ -170,11 +204,17 @@ void detect_physmem_online_ranges(unsigned long max_physmem_end)
{
if (!sclp_early_read_storage_info()) {
physmem_info.info_source = MEM_DETECT_SCLP_STOR_INFO;
+ return;
} else if (!diag260()) {
physmem_info.info_source = MEM_DETECT_DIAG260;
- } else if (max_physmem_end) {
- add_physmem_online_range(0, max_physmem_end);
+ return;
+ } else if (physmem_info.info_source == MEM_DETECT_DIAG500_STOR_LIMIT) {
+ max_physmem_end = 0;
+ if (!sclp_early_get_memsize(&max_physmem_end))
+ physmem_info.info_source = MEM_DETECT_SCLP_READ_INFO;
}
+ if (max_physmem_end)
+ add_physmem_online_range(0, max_physmem_end);
}

void physmem_set_usable_limit(unsigned long limit)
diff --git a/arch/s390/include/asm/physmem_info.h b/arch/s390/include/asm/physmem_info.h
index f45cfc8bc233..51b68a43e195 100644
--- a/arch/s390/include/asm/physmem_info.h
+++ b/arch/s390/include/asm/physmem_info.h
@@ -9,6 +9,7 @@ enum physmem_info_source {
MEM_DETECT_NONE = 0,
MEM_DETECT_SCLP_STOR_INFO,
MEM_DETECT_DIAG260,
+ MEM_DETECT_DIAG500_STOR_LIMIT,
MEM_DETECT_SCLP_READ_INFO,
MEM_DETECT_BIN_SEARCH
};
@@ -107,6 +108,8 @@ static inline const char *get_physmem_info_source(void)
return "sclp storage info";
case MEM_DETECT_DIAG260:
return "diag260";
+ case MEM_DETECT_DIAG500_STOR_LIMIT:
+ return "diag500 storage limit";
case MEM_DETECT_SCLP_READ_INFO:
return "sclp read info";
case MEM_DETECT_BIN_SEARCH:
--
2.46.1