Re: [syzbot] [usb?] INFO: task hung in usb_port_suspend

[Alan Stern]

On Mon, Oct 14, 2024 at 10:20:02AM -0700, syzbot wrote:
> Hello,
> 
> syzbot has tested the proposed patch and the reproducer did not trigger any issue:

Oops, I based that on the wrong patch.  Trying again...

Alan Stern

#syz test: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing

Index: usb-devel/drivers/usb/gadget/udc/dummy_hcd.c
===================================================================
--- usb-devel.orig/drivers/usb/gadget/udc/dummy_hcd.c
+++ usb-devel/drivers/usb/gadget/udc/dummy_hcd.c
@@ -50,7 +50,7 @@
 #define POWER_BUDGET	500	/* in mA; use 8 for low-power port testing */
 #define POWER_BUDGET_3	900	/* in mA */
 
-#define DUMMY_TIMER_INT_NSECS	125000 /* 1 microframe */
+#define DUMMY_INT_KTIME	ns_to_ktime(125000)	 /* 1 microframe */
 
 static const char	driver_name[] = "dummy_hcd";
 static const char	driver_desc[] = "USB Host+Gadget Emulator";
@@ -257,6 +257,8 @@ struct dummy_hcd {
 	unsigned			active:1;
 	unsigned			old_active:1;
 	unsigned			resuming:1;
+
+	bool				alanflag;
 };
 
 struct dummy {
@@ -1304,7 +1306,7 @@ static int dummy_urb_enqueue(
 
 	/* kick the scheduler, it'll do the rest */
 	if (!hrtimer_active(&dum_hcd->timer))
-		hrtimer_start(&dum_hcd->timer, ns_to_ktime(DUMMY_TIMER_INT_NSECS),
+		hrtimer_start(&dum_hcd->timer, DUMMY_INT_KTIME,
 				HRTIMER_MODE_REL_SOFT);
 
  done:
@@ -1325,9 +1327,15 @@ static int dummy_urb_dequeue(struct usb_
 
 	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
 	if (!rc && dum_hcd->rh_state != DUMMY_RH_RUNNING &&
-			!list_empty(&dum_hcd->urbp_list))
-		hrtimer_start(&dum_hcd->timer, ns_to_ktime(0), HRTIMER_MODE_REL_SOFT);
-
+			!list_empty(&dum_hcd->urbp_list)) {
+		dev_info(dummy_dev(dum_hcd), "Dequeue restart %p\n", urb);
+		hrtimer_start(&dum_hcd->timer, DUMMY_INT_KTIME,
+				HRTIMER_MODE_REL_SOFT);
+	} else {
+		dev_info(dummy_dev(dum_hcd), "Dequeue norestart: %d %p active %d\n",
+				rc, urb, hrtimer_active(&dum_hcd->timer));
+	}
+	dum_hcd->alanflag = true;
 	spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
 	return rc;
 }
@@ -1813,6 +1821,8 @@ static enum hrtimer_restart dummy_timer(
 
 	/* look at each urb queued by the host side driver */
 	spin_lock_irqsave(&dum->lock, flags);
+	if (dum_hcd->alanflag)
+		dev_info(dummy_dev(dum_hcd), "Timer handler\n");
 
 	if (!dum_hcd->udev) {
 		dev_err(dummy_dev(dum_hcd),
@@ -1984,6 +1994,8 @@ return_urb:
 			ep->already_seen = ep->setup_stage = 0;
 
 		usb_hcd_unlink_urb_from_ep(dummy_hcd_to_hcd(dum_hcd), urb);
+		if (dum_hcd->alanflag)
+			dev_info(dummy_dev(dum_hcd), "Giveback %p\n", urb);
 		spin_unlock(&dum->lock);
 		usb_hcd_giveback_urb(dummy_hcd_to_hcd(dum_hcd), urb, status);
 		spin_lock(&dum->lock);
@@ -1995,11 +2007,11 @@ return_urb:
 		usb_put_dev(dum_hcd->udev);
 		dum_hcd->udev = NULL;
 	} else if (dum_hcd->rh_state == DUMMY_RH_RUNNING) {
-		/* want a 1 msec delay here */
-		hrtimer_start(&dum_hcd->timer, ns_to_ktime(DUMMY_TIMER_INT_NSECS),
+		hrtimer_start(&dum_hcd->timer, DUMMY_INT_KTIME,
 				HRTIMER_MODE_REL_SOFT);
 	}
 
+	dum_hcd->alanflag = false;
 	spin_unlock_irqrestore(&dum->lock, flags);
 
 	return HRTIMER_NORESTART;
@@ -2391,7 +2403,8 @@ static int dummy_bus_resume(struct usb_h
 		dum_hcd->rh_state = DUMMY_RH_RUNNING;
 		set_link_state(dum_hcd);
 		if (!list_empty(&dum_hcd->urbp_list))
-			hrtimer_start(&dum_hcd->timer, ns_to_ktime(0), HRTIMER_MODE_REL_SOFT);
+			hrtimer_start(&dum_hcd->timer, DUMMY_INT_KTIME,
+					HRTIMER_MODE_REL_SOFT);
 		hcd->state = HC_STATE_RUNNING;
 	}
 	spin_unlock_irq(&dum_hcd->dum->lock);