[PATCH v3 0/5] x1e80100 RTC support

[Jonathan Marek]

x1e80100 needs a workaround because the RTC alarm is not owned by HLOS.
It also needs the same offset workaround as sc8280xp/etc.

v2: remove duplicated ops and use RTC_FEATURE_ALARM instead
v3:
 - renamed flag to qcom,no-alarm
 - don't remove alarm registers/interrupt from dts

Jonathan Marek (5):
  rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
  dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag
  arm64: dts: qcom: x1e80100-pmics: enable RTC
  arm64: dts: qcom: x1e80100-crd: add rtc offset to set rtc time
  arm64: dts: qcom: x1e78100-t14s: add rtc offset to set rtc time

 .../bindings/rtc/qcom-pm8xxx-rtc.yaml         |  5 +++
 .../qcom/x1e78100-lenovo-thinkpad-t14s.dts    | 11 +++++
 arch/arm64/boot/dts/qcom/x1e80100-crd.dts     | 11 +++++
 arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi  |  3 +-
 drivers/rtc/rtc-pm8xxx.c                      | 44 +++++++++++++------
 5 files changed, 58 insertions(+), 16 deletions(-)

-- 
2.45.1