[PATCH v1 1/2] dt-bindings: i2c: spacemit: add support for K1 SoC

[Troy Mitchell]

The i2c of K1 supports fast-speed-mode and high-speed-mode,
and supports FIFO transmission.

Signed-off-by: Troy Mitchell <TroyMitchell988@xxxxxxxxx>
---
 .../bindings/i2c/spacemit,k1-i2c.yaml         | 59 +++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml

diff --git a/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
new file mode 100644
index 000000000000..c1460ec2b323
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/spacemit,k1-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C controller embedded in SpacemiT's K1 SoC
+
+maintainers:
+  - Troy Mitchell <troymitchell988@xxxxxxxxx>
+
+properties:
+  compatible:
+    const: spacemit,k1-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description:
+      Desired I2C bus clock frequency in Hz. As only fast and high-speed
+      modes are supported by hardware, possible values are 100000 and 400000.
+    enum: [100000, 400000]
+    default: 100000
+
+  fifo-disable:
+    type: boolean
+    description:
+      Whether to disable FIFO. If FIFO is turned on, it will be interrupted
+      only when the FIFO depth is reached, which can reduce the frequency
+      of interruption.
+    default: false
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    i2c0: i2c@d4010800 {
+        compatible = "spacemit,k1-i2c";
+        reg = <0x0 0xd4010800 0x0 0x38>;
+        interrupt-parent = <&plic>;
+        interrupts = <36>;
+        clocks = <&ccu 90>;
+        clock-frequency = <100000>;
+    };
+
+...
-- 
2.34.1