Re: [PATCH v2 2/3] pinctrl: meson: Add driver support for Amlogic A4 SoCs

[Krzysztof Kozlowski]

On 15/10/2024 10:08, Xianwei Zhao wrote:
> Hi Krzysztof,
>      Thanks for your quick reply.
> 
> On 2024/10/15 15:59, Krzysztof Kozlowski wrote:
>> [ EXTERNAL EMAIL ]
>>
>> On 15/10/2024 09:54, Xianwei Zhao wrote:
>>> Hi Krzysztof,
>>>       Thanks for your reply.
>>>
>>> On 2024/10/15 14:01, Krzysztof Kozlowski wrote:
>>>> [ EXTERNAL EMAIL ]
>>>>
>>>> On Mon, Oct 14, 2024 at 05:05:52PM +0800, Xianwei Zhao wrote:
>>>>> Add a new pinctrl driver for Amlogic A4 SoCs which share
>>>>> the same register layout as the previous Amlogic S4.
>>>>>
>>>>> Signed-off-by: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
>>>>> ---
>>>>>    drivers/pinctrl/meson/Kconfig              |    6 +
>>>>>    drivers/pinctrl/meson/Makefile             |    1 +
>>>>>    drivers/pinctrl/meson/pinctrl-amlogic-a4.c | 1176 ++++++++++++++++++++++++++++
>>>>>    3 files changed, 1183 insertions(+)
>>>>>
>>>>> diff --git a/drivers/pinctrl/meson/Kconfig b/drivers/pinctrl/meson/Kconfig
>>>>> index cc397896762c..3e90bb5ec442 100644
>>>>> --- a/drivers/pinctrl/meson/Kconfig
>>>>> +++ b/drivers/pinctrl/meson/Kconfig
>>>>> @@ -67,6 +67,12 @@ config PINCTRL_MESON_S4
>>>>>         select PINCTRL_MESON_AXG_PMX
>>>>>         default y
>>>>>
>>>>> +config PINCTRL_AMLOGIC_A4
>>>>> +     tristate "Amlogic A4 SoC pinctrl driver"
>>>>> +     depends on ARM64
>>>>> +     select PINCTRL_MESON_AXG_PMX
>>>>> +     default y
>>>>> +
>>>>>    config PINCTRL_AMLOGIC_C3
>>>>>         tristate "Amlogic C3 SoC pinctrl driver"
>>>>>         depends on ARM64
>>>>> diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile
>>>>> index 9e538b9ffb9b..c92a65a83344 100644
>>>>> --- a/drivers/pinctrl/meson/Makefile
>>>>> +++ b/drivers/pinctrl/meson/Makefile
>>>>> @@ -10,5 +10,6 @@ obj-$(CONFIG_PINCTRL_MESON_AXG) += pinctrl-meson-axg.o
>>>>>    obj-$(CONFIG_PINCTRL_MESON_G12A) += pinctrl-meson-g12a.o
>>>>>    obj-$(CONFIG_PINCTRL_MESON_A1) += pinctrl-meson-a1.o
>>>>>    obj-$(CONFIG_PINCTRL_MESON_S4) += pinctrl-meson-s4.o
>>>>> +obj-$(CONFIG_PINCTRL_AMLOGIC_A4) += pinctrl-amlogic-a4.o
>>>>>    obj-$(CONFIG_PINCTRL_AMLOGIC_C3) += pinctrl-amlogic-c3.o
>>>>>    obj-$(CONFIG_PINCTRL_AMLOGIC_T7) += pinctrl-amlogic-t7.o
>>>>> diff --git a/drivers/pinctrl/meson/pinctrl-amlogic-a4.c b/drivers/pinctrl/meson/pinctrl-amlogic-a4.c
>>>>> new file mode 100644
>>>>> index 000000000000..dee1ae43edb5
>>>>> --- /dev/null
>>>>> +++ b/drivers/pinctrl/meson/pinctrl-amlogic-a4.c
>>>>> @@ -0,0 +1,1176 @@
>>>>> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
>>>>> +/*
>>>>> + * Pin controller and GPIO driver for Amlogic A4 SoC.
>>>>> + *
>>>>> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
>>>>> + * Author: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
>>>>> + *         Huqiang Qin <huqiang.qin@xxxxxxxxxxx>
>>>>> + */
>>>>> +
>>>>> +#include <dt-bindings/gpio/amlogic-a4-gpio.h>
>>>>
>>>> I do not see any usage of it.
>>>>
>>>
>>> The header file "amlogic-a4-gpio.h"  is used by AMLOGIC_PIN and
>>> GPIO_GROUP_V2, The code used  is  AMLOGIC_GPIO().
>>> This is binding definition.
>>
>> Then all other defines are not used. AMLOGIC_GPIO is not used by DTS, so
>> how is that a binding? Don't stuff random defines into the bindings.
>>
> 
> The AMlOGIC_GPIO definition depends on other definitions to be used.
> It is not currently used by DTS, but will be used by other modules in 
> the future.

You keep disagreeing, addressing only some parts and ignoring the rest.
Explain me what do you bind here that you call it a "binding"?

Best regards,
Krzysztof