Re:Re:[PATCH v5] rockchip/drm: vop2: add support for gamma LUT
From: Andy Yan
Date: Tue Oct 15 2024 - 08:25:04 EST
Hi Piotr,
At 2024-10-15 19:55:44, "Piotr Zalewski" <pZ010001011111@xxxxxxxxx> wrote:
>On Tuesday, October 15th, 2024 at 5:38 AM, Andy Yan <andyshrk@xxxxxxx> wrote:
>
>> Hi Piotr,
>>
>> At 2024-10-15 06:30:27, "Piotr Zalewski" pZ010001011111@xxxxxxxxx wrote:
>>
>> > Add support for gamma LUT in VOP2 driver. The implementation was inspired
>> > by one found in VOP1 driver. Blue and red channels in gamma LUT register
>> > write were swapped with respect to how gamma LUT values are written in
>> > VOP1. Gamma LUT port selection was added before the write of new gamma LUT
>> > table. If the current SoC is RK3588, "seamless" gamma lut update is
>> > performed similarly to how it was done in the case of RK3399 in VOP1[1]. In
>> > seamless update gamma LUT disable before the write isn't necessary,
>> > different register is being used to select gamma LUT port[2] and after
>> > setting DSP_LUT_EN bit, GAMMA_UPDATE_EN bit is set[3]. Gamma size is set
>> > and drm color management is enabled for each video port's CRTC except ones
>> > which have no associated device.
>> >
>> > Solution was tested on RK3566 (Pinetab2). When using userspace tools
>> > which set eg. constant color temperature no issues were noticed. When
>> > using userspace tools which adjust eg. color temperature the slight screen
>> > flicker is visible probably because of gamma LUT disable.
>> >
>> > Compare behaviour of eg.:
>> > `gammastep -O 3000`
>> >
>> > To eg.:
>> > `gammastep -l 53:23 -t 6000:3000`
>> >
>> > In latter case color temperature is slowly adjusted at the beginning which
>> > causes screen to slighly flicker. Then it adjusts every few seconds which
>> > also causes slight screen flicker.
>> >
>> > [1] https://lists.infradead.org/pipermail/linux-rockchip/2021-October/028132.html
>> > [2] https://lore.kernel.org/linux-rockchip/48249708-8c05-40d2-a5d8-23de960c5a77@xxxxxxxxxxxxxx/
>> > [3] https://github.com/radxa/kernel/blob/linux-6.1-stan-rkr1/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c#L3437
>> >
>> > Helped-by: Daniel Stone daniel@xxxxxxxxxxxxx
>> > Helped-by: Dragan Simic dsimic@xxxxxxxxxxx
>> > Helped-by: Diederik de Haas didi.debian@xxxxxxxxx
>> > Helped-by: Andy Yan andy.yan@xxxxxxxxxxxxxx
>> > Signed-off-by: Piotr Zalewski pZ010001011111@xxxxxxxxx
>> > ---
>> >
>> > Notes:
>> > Changes in v5:
>> > - Do not trigger full modeset in case seamless gamma lut update
>> > isn't possible (eg. rk356x case). It was discovered that with
>> > full modeset, userspace tools which adjust color temperature with
>> > high frequency cause screen to go black and reduce overall
>> > performance. Instead, revert to previous behaviour of lut update
>> > happening in atomic_begin or (in case there is a modeset) in
>> > atomic_enable. Also, add unrelated to modeset trigger
>> > changes/improvements from v4 on top. Improve code readability
>> > too.
>> >
>> > Changes in v4:
>> > - rework the implementation to better utilize DRM atomic updates[2]
>> > - handle the RK3588 case[2][3]
>> >
>> > Changes in v3:
>> > - v3 is patch v2 "resend", by mistake the incremental patch was
>> > sent in v2
>> >
>> > Changes in v2:
>> > - Apply code styling corrections[1]
>> > - Move gamma LUT write inside the vop2 lock
>> >
>> > Link to v4: https://lore.kernel.org/linux-rockchip/20240815124306.189282-2-pZ010001011111@xxxxxxxxx/
>> > Link to v3: https://lore.kernel.org/linux-rockchip/TkgKVivuaLFLILPY-n3iZo_8KF-daKdqdu-0_e0HP-5Ar_8DALDeNWog2suwWKjX7eomcbGET0KZe7DlzdhK2YM6CbLbeKeFZr-MJzJMtw0=@proton.me/
>> > Link to v2: https://lore.kernel.org/linux-rockchip/Hk03HDb6wSSHWtEFZHUye06HR0-9YzP5nCHx9A8_kHzWSZawDrU1o1pjEGkCOJFoRg0nTB4BWEv6V0XBOjF4-0Mj44lp2TrjaQfnytzp-Pk=@proton.me/T/#u
>> > Link to v1: https://lore.kernel.org/linux-rockchip/9736eadf6a9d8e97eef919c6b3d88828@xxxxxxxxxxx/T/#t
>> >
>> > [1] https://lore.kernel.org/linux-rockchip/d019761504b540600d9fc7a585d6f95f@xxxxxxxxxxx
>> > [2] https://lore.kernel.org/linux-rockchip/CAPj87rOM=j0zmuWL9frGKV1xzPbJrk=Q9ip7F_HAPYnbCqPouw@xxxxxxxxxxxxxx
>> > [3] https://lore.kernel.org/linux-rockchip/7d998e4c-e1d3-4e8b-af76-c5bc83b43647@xxxxxxxxxxxxxx
>> >
>> > drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 161 +++++++++++++++++++
>> > drivers/gpu/drm/rockchip/rockchip_drm_vop2.h | 5 +
>> > 2 files changed, 166 insertions(+)
>> >
>> > diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> > index 9873172e3fd3..a6a2d7df5ecc 100644
>> > --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> > +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> > @@ -278,6 +278,15 @@ static u32 vop2_readl(struct vop2 *vop2, u32 offset)
>> > return val;
>> > }
>> >
>> > +static u32 vop2_vp_read(struct vop2_video_port *vp, u32 offset)
>> > +{
>> > + u32 val;
>> > +
>> > + regmap_read(vp->vop2->map, vp->data->offset + offset, &val);
>> > +
>> > + return val;
>> > +}
>> > +
>> > static void vop2_win_write(const struct vop2_win *win, unsigned int reg, u32 v)
>> > {
>> > regmap_field_write(win->reg[reg], v);
>> > @@ -998,6 +1007,55 @@ static void vop2_disable(struct vop2 *vop2)
>> > clk_disable_unprepare(vop2->hclk);
>> > }
>> >
>> > +static bool vop2_vp_dsp_lut_is_enabled(struct vop2_video_port *vp)
>> > +{
>> > + return (u32) (vop2_vp_read(vp, RK3568_VP_DSP_CTRL) & RK3568_VP_DSP_CTRL__DSP_LUT_EN) >
>> > + 0;
>> > +}
>> > +
>> > +static void vop2_vp_dsp_lut_disable(struct vop2_video_port *vp)
>> > +{
>> > + u32 dsp_ctrl = vop2_vp_read(vp, RK3568_VP_DSP_CTRL);
>> > +
>> > + dsp_ctrl &= ~RK3568_VP_DSP_CTRL__DSP_LUT_EN;
>> > + vop2_vp_write(vp, RK3568_VP_DSP_CTRL, dsp_ctrl);
>> > +}
>> > +
>> > +static bool vop2_vp_dsp_lut_poll_disable(struct vop2_video_port *vp)
>> > +{
>> > + u32 dsp_ctrl;
>> > + int ret = readx_poll_timeout(vop2_vp_dsp_lut_is_enabled, vp, dsp_ctrl,
>> > + !dsp_ctrl, 5, 30 * 1000);
>> > + if (ret) {
>> > + drm_err(vp->vop2->drm, "display LUT RAM enable timeout!\n");
>> > + return false;
>> > + }
>> > +
>> > + return true;
>> > +}
>> > +
>> > +static void vop2_vp_dsp_lut_enable(struct vop2_video_port *vp)
>> > +{
>> > + u32 dsp_ctrl = vop2_vp_read(vp, RK3568_VP_DSP_CTRL);
>> > +
>> > + dsp_ctrl |= RK3568_VP_DSP_CTRL__DSP_LUT_EN;
>> > + vop2_vp_write(vp, RK3568_VP_DSP_CTRL, dsp_ctrl);
>> > +}
>> > +
>> > +static void vop2_vp_dsp_lut_update_enable(struct vop2_video_port *vp)
>> > +{
>> > + u32 dsp_ctrl = vop2_vp_read(vp, RK3568_VP_DSP_CTRL);
>> > +
>> > + dsp_ctrl |= RK3588_VP_DSP_CTRL__GAMMA_UPDATE_EN;
>> > + vop2_vp_write(vp, RK3568_VP_DSP_CTRL, dsp_ctrl);
>> > +}
>> > +
>> > +static inline bool vop2_supports_seamless_gamma_lut_update(struct vop2 *vop2)
>> > +{
>> > + return (vop2->data->soc_id == 3588);
>> > +}
>> > +
>> > +
>> > static void vop2_crtc_atomic_disable(struct drm_crtc *crtc,
>> > struct drm_atomic_state *state)
>> > {
>> > @@ -1482,6 +1540,66 @@ static bool vop2_crtc_mode_fixup(struct drm_crtc *crtc,
>> > return true;
>> > }
>> >
>> > +static void vop2_crtc_write_gamma_lut(struct vop2 *vop2, struct drm_crtc *crtc)
>> > +{
>> > + const struct vop2_video_port *vp = to_vop2_video_port(crtc);
>> > + const struct vop2_video_port_data *vp_data = &vop2->data->vp[vp->id];
>> > +
>> > + struct drm_color_lut *lut = crtc->state->gamma_lut->data;
>> > + unsigned int i, bpc = ilog2(vp_data->gamma_lut_len);
>> > + u32 word;
>> > +
>> > + for (i = 0; i < crtc->gamma_size; i++) {
>> > + word = (drm_color_lut_extract(lut[i].blue, bpc) << (2 * bpc)) |
>> > + (drm_color_lut_extract(lut[i].green, bpc) << bpc) |
>> > + drm_color_lut_extract(lut[i].red, bpc);
>> > +
>> > + writel(word, vop2->lut_regs + i * 4);
>> > + }
>> > +}
>> > +
>> > +static void vop2_crtc_atomic_try_set_gamma(struct vop2 *vop2,
>>
>>
>> Why we need a try in the function name ?
>
>Since there is an if condition which checks for lut regs and color mgmt
>changed flag directly in the function, 'try' in the function name
>increases readability by suggesting that.
>
>> > + struct vop2_video_port *vp,
>> > + struct drm_crtc *crtc,
>> > + struct drm_crtc_state *crtc_state)
>> > +{
>> > +
>> > + if (vop2->lut_regs && crtc_state->color_mgmt_changed) {
>> > + if (!crtc_state->gamma_lut) {
>> > + vop2_vp_dsp_lut_disable(vp);
>> > + return;
>> > + }
>> > +
>> > + if (vop2_supports_seamless_gamma_lut_update(vop2)) {
>>
>> I think it's bettery to check for rk3568/rk3566 here, the newer soc will all follow
>> rk3588 support seamless gamma lut update.
>
>I will change in the next version.
>
>> > + vop2_writel(vop2, RK3568_LUT_PORT_SEL, FIELD_PREP(
>> > + RK3588_LUT_PORT_SEL__GAMMA_AHB_WRITE_SEL,
>> > + vp->id));
>> > + vop2_crtc_write_gamma_lut(vop2, crtc);
>> > + vop2_vp_dsp_lut_enable(vp);
>> > + vop2_vp_dsp_lut_update_enable(vp);
>> > + } else {
>>
>>
>> As for rk3566/68, we should do exclusive check here, because there is only
>> one gamma , only one VP can use it at a time. See my comments in V3:
>
>What do you mean exactly by exclusive check in this case.It's true that
>gamma LUT is shared across video ports in rk356x but, if I correctly
>understand, this doesn't forbid to reprogram LUT port sel and allow other
>VP to use gamma LUT.
Yes, we can reprogram LUT port sel, but we need to make sure the the dsp_lut_en bit in VPx is cleared if we
want reprogram LUT port sel form VPx to VPy.
>
>> https://patchwork.kernel.org/project/linux-rockchip/patch/TkgKVivuaLFLILPY-n3iZo_8KF-daKdqdu-0_e0HP-5Ar_8DALDeNWog2suwWKjX7eomcbGET0KZe7DlzdhK2YM6CbLbeKeFZr-MJzJMtw0=@proton.me/
>>
>> > + vop2_vp_dsp_lut_disable(vp);
>> > + vop2_cfg_done(vp);
>> > + if (!vop2_vp_dsp_lut_poll_disable(vp))
>> > + return;
>> > +
>> > + vop2_writel(vop2, RK3568_LUT_PORT_SEL, vp->id);
>> > + vop2_crtc_write_gamma_lut(vop2, crtc);
>> > + vop2_vp_dsp_lut_enable(vp);
>> > + }
>> > + }
>> > +}
>> > +
>> > +static inline void vop2_crtc_atomic_try_set_gamma_locked(struct vop2 *vop2,
>> > + struct vop2_video_port *vp,
>> > + struct drm_crtc *crtc,
>> > + struct drm_crtc_state *crtc_state)
>> > +{
>> > + vop2_lock(vop2);
>> > + vop2_crtc_atomic_try_set_gamma(vop2, vp, crtc, crtc_state);
>> > + vop2_unlock(vop2);
>> > +}
>> > +
>> > static void vop2_dither_setup(struct drm_crtc *crtc, u32 *dsp_ctrl)
>> > {
>> > struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
>> > @@ -2057,11 +2175,35 @@ static void vop2_crtc_atomic_enable(struct drm_crtc *crtc,
>> >
>> > vop2_vp_write(vp, RK3568_VP_DSP_CTRL, dsp_ctrl);
>> >
>> > + vop2_crtc_atomic_try_set_gamma(vop2, vp, crtc, crtc_state);
>> > +
>> > drm_crtc_vblank_on(crtc);
>> >
>> > vop2_unlock(vop2);
>> > }
>> >
>> > +static int vop2_crtc_atomic_check_gamma(struct vop2_video_port *vp,
>> > + struct drm_crtc *crtc,
>> > + struct drm_atomic_state *state,
>> > + struct drm_crtc_state *crtc_state)
>> > +{
>> > + struct vop2 *vop2 = vp->vop2;
>> > + unsigned int len;
>> > +
>> > + if (!vp->vop2->lut_regs || !crtc_state->color_mgmt_changed ||
>> > + !crtc_state->gamma_lut)
>> > + return 0;
>> > +
>> > + len = drm_color_lut_size(crtc_state->gamma_lut);
>> > + if (len != crtc->gamma_size) {
>> > + drm_dbg(vop2->drm, "Invalid LUT size; got %d, expected %d\n",
>> > + len, crtc->gamma_size);
>> > + return -EINVAL;
>> > + }
>> > +
>> > + return 0;
>> > +}
>> > +
>> > static int vop2_crtc_atomic_check(struct drm_crtc *crtc,
>> > struct drm_atomic_state *state)
>> > {
>> > @@ -2069,6 +2211,11 @@ static int vop2_crtc_atomic_check(struct drm_crtc *crtc,
>> > struct drm_plane *plane;
>> > int nplanes = 0;
>> > struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
>> > + int ret;
>> > +
>> > + ret = vop2_crtc_atomic_check_gamma(vp, crtc, state, crtc_state);
>> > + if (ret)
>> > + return ret;
>> >
>> > drm_atomic_crtc_state_for_each_plane(plane, crtc_state)
>> > nplanes++;
>> > @@ -2456,9 +2603,12 @@ static void vop2_setup_dly_for_windows(struct vop2 *vop2)
>> > vop2_writel(vop2, RK3568_SMART_DLY_NUM, sdly);
>> > }
>> >
>> > +
>> > static void vop2_crtc_atomic_begin(struct drm_crtc *crtc,
>> > struct drm_atomic_state *state)
>> > {
>> > + struct drm_crtc_state *crtc_state =
>> > + drm_atomic_get_new_crtc_state(state, crtc);
>> > struct vop2_video_port *vp = to_vop2_video_port(crtc);
>> > struct vop2 *vop2 = vp->vop2;
>> > struct drm_plane *plane;
>> > @@ -2482,6 +2632,11 @@ static void vop2_crtc_atomic_begin(struct drm_crtc *crtc,
>> > vop2_setup_layer_mixer(vp);
>> > vop2_setup_alpha(vp);
>> > vop2_setup_dly_for_windows(vop2);
>> > +
>> > + // NOTE: in case of modeset gamma lut update
>> > + // already happened in atomic enable
>> > + if (!drm_atomic_crtc_needs_modeset(crtc_state))
>> > + vop2_crtc_atomic_try_set_gamma_locked(vop2, vp, crtc, crtc_state);
>>
>>
>> I would like update gamma at crtc_atomic_flush callback like mediateck, tidss, ast, and
>> we also following these in our bsp code.
>
>I will move it to atomic_flush in the next version.
>
>> > }
>> >
>> > static void vop2_crtc_atomic_flush(struct drm_crtc *crtc,
>> > @@ -2790,7 +2945,13 @@ static int vop2_create_crtcs(struct vop2 *vop2)
>> > }
>> >
>> > drm_crtc_helper_add(&vp->crtc, &vop2_crtc_helper_funcs);
>> > + if (vop2->lut_regs && vp->crtc.dev != NULL) {
>> > + const struct vop2_video_port_data *vp_data = &vop2_data->vp[vp->id];
>> >
>> > + drm_mode_crtc_set_gamma_size(&vp->crtc, vp_data->gamma_lut_len);
>> > + drm_crtc_enable_color_mgmt(&vp->crtc, 0, false,
>> > + vp_data->gamma_lut_len);
>>
>>
>> It seems that we can keep it in one line, the default limit of linux kernel coding style is 100 characters now.
>
>Thanks. I didn't know, I will amend it.
See bdc48fa11e46("checkpatch/coding-style: deprecate 80-column warning")
>
>> > + }
>> > init_completion(&vp->dsp_hold_completion);
>> > }
>> >
>> > diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>> > index 615a16196aff..510dda6f9092 100644
>> > --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>> > +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>> > @@ -394,6 +394,7 @@ enum dst_factor_mode {
>> > #define RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN BIT(15)
>> >
>> > #define RK3568_VP_DSP_CTRL__STANDBY BIT(31)
>> > +#define RK3568_VP_DSP_CTRL__DSP_LUT_EN BIT(28)
>> > #define RK3568_VP_DSP_CTRL__DITHER_DOWN_MODE BIT(20)
>> > #define RK3568_VP_DSP_CTRL__DITHER_DOWN_SEL GENMASK(19, 18)
>> > #define RK3568_VP_DSP_CTRL__DITHER_DOWN_EN BIT(17)
>> > @@ -408,6 +409,8 @@ enum dst_factor_mode {
>> > #define RK3568_VP_DSP_CTRL__CORE_DCLK_DIV BIT(4)
>> > #define RK3568_VP_DSP_CTRL__OUT_MODE GENMASK(3, 0)
>> >
>> > +#define RK3588_VP_DSP_CTRL__GAMMA_UPDATE_EN BIT(22)
>> > +
>> > #define RK3588_VP_CLK_CTRL__DCLK_OUT_DIV GENMASK(3, 2)
>> > #define RK3588_VP_CLK_CTRL__DCLK_CORE_DIV GENMASK(1, 0)
>> >
>> > @@ -460,6 +463,8 @@ enum dst_factor_mode {
>> > #define RK3588_DSP_IF_POL__DP1_PIN_POL GENMASK(14, 12)
>> > #define RK3588_DSP_IF_POL__DP0_PIN_POL GENMASK(10, 8)
>> >
>> > +#define RK3588_LUT_PORT_SEL__GAMMA_AHB_WRITE_SEL GENMASK(13, 12)
>> > +
>> > #define RK3568_VP0_MIPI_CTRL__DCLK_DIV2_PHASE_LOCK BIT(5)
>> > #define RK3568_VP0_MIPI_CTRL__DCLK_DIV2 BIT(4)
>> >
>> > --
>> > 2.47.0
>> >
>> > _______________________________________________
>> > Linux-rockchip mailing list
>> > Linux-rockchip@xxxxxxxxxxxxxxxxxxx
>> > http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
>_______________________________________________
>Linux-rockchip mailing list
>Linux-rockchip@xxxxxxxxxxxxxxxxxxx
>http://lists.infradead.org/mailman/listinfo/linux-rockchip